display MAZDA MODEL CX-5 2015 Quick Guide (in English)

8
When Driving
For details, refer to Section 4, “Instrument Cluster and Display”.
Warning/Indicator Lights
Signal Warning/Indicator Lights
1
2
3
4
7
8
9
10
11
12Brake System Warning Light Master Warning Light
ABS Warning Light
Charging System Warning
Indication/Warning Light
Engine Oil Warning Light
Check Engine Light
High Engine Coolant Temperature
Warning Light (Red)
i-stop Warning Light
(Amber)/Indicator Light (Green)
14
17
18
19Automatic Transaxle Warning
Indication
Power Steering Malfunction
Indication
20Air Bag/Front Seat Belt Pretensioner
System Warning Light
Low Fuel Warning Light
21Seat Belt Warning Light
22
2327
28
29
35
36
38
40Tyre Pressure Monitoring System
Warning Light
KEY Indication
High Beam Control System (HBC)
Warning Light (Amber)/Indicator
Light (Green)
TCS/DSC Indicator Light
TCS OFF Indicator Light
Low Engine Coolant Temperature
Indicator Light (Blue)
41
42
43
44
45Shift Position Indication
Headlight High-Beam Indicator Light
Direction indicator/Hazard Warning
Indicator Lights
Security Indicator Light
49
Cruise Main Indicator Light (Amber)/
Cruise Set Indicator Light (Green)
Lights-On Indicator Light
51Front Fog Light Indicator Light
Rear Fog Light Indicator Light
52Signal Warning/Indicator Lights
Warning (Display Indication)
Some of the warning/indicator lights are displayed in the instrument cluster.
If a warning/indicator light is displayed in the instrument cluster, verify the
meaning of the warning in the Warning (Display Indication) item.
Glow Indicator Light
Diesel Particulate Filter Indication
Wrench Indication31
32
33
Vehicle Speed Warning Indication
34Low Ambient Temperature Warning
Indication
Low Washer Fluid Level Warning
Indication 25
Mazda Radar Cruise Control
(MRCC) Warning Light
(Amber)/Indicator Light (Green) 46
24
Electric Parking Brake Indicator Light
Electric Parking Brake Warning Light
Lane-Keep Assist System Indication
Lane-Keep Assist System OFF Indication
Lane Departure Warning System
(LDWS) Indication
Lane Departure Warning System
(LDWS) OFF Indication
4WD Warning Indication
Door-Ajar Warning Indication
Liftgate-Ajar Warning Indication
Adaptive LED Headlights Warning
Light (Amber)/Indicator Light (Green)
Smart Brake Support/Smart City Brake
Support (SBS/SCBS) OFF Indicator Light
Smart City Brake Support (SCBS)
Warning Indication
i-ELOOP Indication
Select Mode Indication
Blind Spot Monitoring (BSM) OFF Indication
LED Headlight Warning Light 5
6
13
15
1630
37
39
47
48
50120 km/h Warning Light
26
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
14For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
Mazda Radar Cruise Control (MRCC) system
The Mazda Radar Cruise Control (MRCC) system is designed to maintain
headway control according to the vehicle speed using a radar sensor to detect the
distance to a vehicle ahead, and by presetting the vehicle speed between 30 km/h
(19 mph) and 145 km/h (90 mph), the driver is freed from having to constantly use
the accelerator or brake pedals.
Use the Mazda Radar Cruise Control (MRCC) system on expressways and other
highways which do not require a lot of repeated acceleration and deceleration.
Do not rely completely on the Mazda Radar Cruise Control (MRCC) system
and always drive carefully:
The Mazda Radar Cruise Control (MRCC) system has limitations in its ability to
detect vehicles ahead depending on the weather and road conditions.
Additionally, the system may be unable to decelerate sufficiently to avoid
hitting the vehicle ahead if the vehicle ahead applies the brakes suddenly or
another vehicle cuts into the driving lane, which could result in an accident.
Check the safety of the surroundings and pay sufficient attention to the
distance between your vehicle and the vehicles travelling in front and behind.
WARNING
Do not use the Mazda Radar Cruise Control (MRCC) system in the
following locations. Otherwise, it could lead to an accident:
• Roads with sharp curves, heavy traffic, or roads requiring repeated and
frequent acceleration.
• When entering expressway interchanges and service areas.
• Slippery roads such as ice or snow-bound roads.
• Long descending slopes. Additionally, if your vehicle starts closing in on the vehicle ahead because, for
example, the vehicle ahead brakes suddenly, a warning sound and a warning
indication in the display are activated simultaneously to alert you to maintain a
sufficient distance between the vehicles.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

15
When Driving
For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
Mazda Radar Cruise Control (MRCC) Display IndicationSetting the Mazda Radar Cruise Control (MRCC)
The Mazda Radar Cruise Control (MRCC) system may be cancelled during rain,
fog, snow or other inclement weather conditions, or when the front surface of the
radiator grille is dirty.
NOTE
Under the following conditions, operation of the Mazda Radar Cruise Control
(MRCC) system is temporarily cancelled, a cancel indication is indicated in the
display in the instrument cluster, and the MRCC indicator light (green) turns off
simultaneously.
• The CANCEL switch is pressed or the brake pedal is depressed.
The setting status of the Mazda Radar Cruise Control (MRCC) system is indicated
in the display in the instrument cluster.
A system malfunction or operation conditions are indicated by a warning.
• The parking brake is applied.
• The shift lever is in the P, N, or R position (for manual transaxle vehicles,
R position only).
• The vehicle speed decreases to less than 25 km (16mph).
• The DSC, Smart Brake Support (SBS) system, or the Smart City Brake
Support (SCBS) system is operating.
• A system malfunction is detected.
Other details are described in the related text.
Vehicle ahead display
MRCC Set vehicle speedMRCC Distance between
vehicle display
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
16
Switch
Switch
OFF switch
RES switch
Cruise control
SET+/SET- switch CANCEL switch
ON switch
For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
Setting the Mazda Radar Cruise Control (MRCC)
How to Set the Speed When the ON switch is pressed, the vehicle speed and the distance between
vehicles while in headway control can be set. The Mazda Radar Cruise Control
(MRCC) indication is displayed in the display of the instrument cluster.
1. Adjust the vehicle speed to the desired setting using the accelerator pedal.
2. Headway control begins when the SET + or SET - switch is pressed. The set
speed and the inter-vehicle distance display filled with white lines are displayed.
Travel statusDuring travel at constant
speedDuring travel under headway
control
Display
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
17For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
Setting the Mazda Radar Cruise Control (MRCC)
How to Set the Distance Between Vehicles During Headway Control
The distance between vehicles is set to a shorter distance each time the switch is
pressed. The distance between vehicles is set to a longer distance by pressing the
switch. The distance-between-vehicles can be set to 4 levels; Long, medium, short,
and extremely short distance.
Distance-between-
vehicles guideline
(at 80 km/h (50 mph)
vehicle speed)
Indication on
displayLong
(about 50 m
(164 ft))Medium
(about 40 m
(131 ft))Short
(about 30 m
(98 ft))Extremely
short
(about 25 m
(82 ft))
Change the Set Vehicle Speed
Changing the set vehicle speed using the SET + / SET - switch
Press and hold the SET + or SET - switch to adjust the set vehicle speed in 10 km/h
(5 mph) increments.
The set vehicle speed can also be adjusted in 1 km/h (1 mph) (European models)
or 5 km/h (5 mph) (Except European models) increments by pressing and
releasing the SET + or SET - switch immediately.
To accelerate using the accelerator pedal
Depress the accelerator pedal and press and release the SET + or SET - switch at
the desired speed. If a switch cannot be operated, the system returns to the set
speed when you release your foot from the accelerator pedal.
Close Proximity Warning
If your vehicle rapidly closes in on the vehicle ahead
because the vehicle applies the brakes suddenly while you
are travelling in headway control, the warning sound
activates and the brake warning is indicated in the display.
Always verify the safety of the surrounding area and
depress the brake pedal while keeping a safe distance from
the vehicle ahead. Additionally, always keep a safer
distance from the vehicles behind you.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

18
When Driving
"Late" function "Early" function
Lane-keep Assist System
The lane-keep assist system alerts the driver that the vehicle is not being kept
within its lane and it provides steering assistance to help the driver stay within the
vehicle lane.
For details, refer to Section 4, “Lane-keep Assist System”.
The steering wheel operation of the lane-keep assist system has “Late” and
“Early” steering assist timing functions and the setting can be changed. Details
are described in Setting Change (Personalisation Features) in the related text.
Do not rely completely on the lane-keep assist system:
Other details are described in the related text.
WARNING
• The lane-keep assist system is not an automatic driving system.
• The detection ability of the lane-keep assist system is limited. Always stay
on course using the steering wheel and drive with care.
NOTE
The lane-keep assist system may not operate as expected depending on how
well the system can detect the white (yellow) lane lines or the road conditions,
however this does not mean there is a problem with the system.
Other details are described in the related text.
To turn on the system
1. Press the lane-keep assist system switch. The lane-keep assist system indication
(stand-by) becomes visible in the multi-information display.
NOTE
If the steering operation assist setting has been turned off, the lane-keep assist
system indication (stand-by) is not indicated.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
19For details, refer to Section 4, “Lane-keep Assist System”.
Lane-keep Assist System
2. Drive the vehicle in the centre of the vehicle lane while the system is on standby.
3. The system becomes operational when all of the following conditions are met.
Other conditions are described in the related text.
• The vehicle speed is about 60 km/h or faster.
• The system detects white (yellow) lane lines.
• If the system can only detect a white (yellow) lane line on either the left or
right, the system will not operate if the vehicle crosses the lane line on the side
that cannot be detected, and a warning will not be activated. The system will
only operate if the vehicle crosses a lane line on the side that can be detected
and it will only activate the warning in this instance.
• If you take your hands off the steering wheel (not holding the steering wheel),
the warning sound is activated and an alert is indicated in the multi-information
display.
Vehicle lane line display
When the lane-keep assist system goes from stand-by to operational, the vehicle
lane lines are indicated in the lane-keep assist display, and only the colour of the
lane line on the side being detected changes.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
23For details, refer to Section 4, “Smart Brake Support (SBS)”.
Smart Brake Support (SBS)
NOTE
The Smart Brake Support (SBS) system may not operate under the followingy
conditions:
• If there is the possibility of hitting only a part of a vehicle ahead.
Although the objects which activate the system are 4-wheeled vehicles, the radar
sensor could detect the following objects, determine them to be an obstruction,
and operate the Smart Brake Support (SBS) system.
• Objects on the road at the entrance to a curve (including guardrails and
snow banks).
If there is the possibility of a collision with a vehicle or
obstruction ahead, the beep sounds continuously and a
warning is indicated in the display.
Collision Warning
Other details are described in the related text.
Other details are described in the related text.
• The vehicle is driven at the same speed as the vehicle ahead.
• The brake pedal, steering wheel, selector lever, or a direction indicator is
operated.
• A vehicle appears in the opposite lane while cornering or rounding a curve.
• When crossing a narrow bridge, passing through a low gate or tunnel, a
narrow gate, or entering an underground parking area.
• Metal objects, bumps, or protruding objects on the road.
• Two-wheeled vehicles such as motorcycles and bicycles, pedestrians, trees.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

24
When Driving
i-ELOOP System
On conventional vehicles, the kinetic energy that is generated when the vehicle is
decelerated by applying the brakes or during engine braking ends up being discarded
as heat. By utilizing this discarded kinetic energy to generate electricity and use it to
power the vehicle's electrical devices and accessories such as the A/C and audio, fuel
consumption can be reduced. Mazda's system for generating electricity from this
kinetic energy is called the Deceleration Energy Generation System (i-ELOOP).
For details, refer to Section 4, “i-ELOOP”.
Electric components Engine Components Vehicle Systems: Air-conditioning Audio Head-lights, etc
Accelerator OFF
Accelerator ON
Energy
regeneration Charge Battery
Battery Power
Power Electric components
Engine Components
Vehicle Systems:
Air-conditioning
Audio
Head-lights, etc
Engine
Variable
Voltage
alternator
Variable
Voltage
alternator Engine
Tyre TyreCapacitor
Capacitor DC-DC
converter
DC-DC
converter
Kinetic energy
Electrical power
The i-ELOOP power generating status is displayed in the audio display.
Indication on display
Control Status Display
Control status
Displays the level of electricity generated by
regenerative braking.
Displays the amount of the electricity stored
in the capacitor.
Displays the status of the electricity stored
in the capacitor and being supplied to the
electrical devices (whole vehicle in display
is illuminated simultaneously).
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

25
When Driving
X Mark Full Low
Diesel Particulate Filter
The diesel particulate filter collects and removes most of the particulate matter
(PM) in the exhaust gas of a diesel engine.
Inspect the engine oil level periodically (before getting in the vehicle). When
inspecting the engine oil, if the engine oil level is close to or exceeds the “X” mark
on the dipstick, replace the engine oil.
Whenever the engine oil is replaced, the vehicles engine control unit needs to be
reset as soon as possible. Otherwise the wrench indicator light or engine oil
warning light may turn on.
For details, refer to Section 4, “i-ELOOP”, “Tyre Pressure Monitoring System”,
“Diesel Particulate Filter” or Section 6, “Owner Maintenance”.
The Tyre Pressure Monitoring System (TPMS) monitors the air pressure of all
four wheels. If the air pressure of one or more tyres is too low, the system warns
the driver by indicating the tyre pressure monitoring system warning light in the
instrument cluster and operating a beep sound.
In the following cases, system initialization must be performed so that the system
operates normally.
• A tyre pressure is adjusted.
• Tyre rotation is performed.
• A tyre or wheel is replaced.
• The battery is replaced or completely drained.
• The tyre pressure monitoring system warning
light is illuminated.
Tyre Pressure Monitoring System
To reset the engine control unit, refer to the vehicle engine control unit reset
procedure or consult an expert repairer, we recommend an Authorised Mazda
Repairer.
i-ELOOP Charging Display
If the vehicle is driven while “i-ELOOP charging”
is displayed, a beep sound is heard. Make sure the
message is no longer displayed before driving.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD