MAZDA MODEL CX-5 2016 Smart Start Guide (in English)

m{zd{ CX-5
SMART START GUIDE
1945220_16d_Mazda_CX-5_SSG_062315.indd 26/23/15 9:31 AM

1
LIGHTING/
TURN SIGNALS
(PP. 27, 30)
INFORMATION
DISPLAY
(P. 9)
HOOD
RELEASE TILT/TELESCOPING

STEERING WHEEL LEVERCRUISE
CONTROL
TPMS SET ( P. 8 )AFS ( P. 2 9 )TCS
OFF
BSM ( P. 2 5 )
Driver’s View
LDWS ( P. 2 3 )
BLUETOOTH®
HANDS-FREE/
AUDIO
(PP. 15-16, 31-32)
ILLUMINATION
DIMMER
(Instrument Cluster)
(PP. 35-36)
This easy-to-use SMART START GUIDE provides information on some
unique features and functions of your new vehicle. Additional features are
available at www.mymazda.com and the MyMazda app -> VEHICLE
HOW TO. Complete information on features and functions are available in
your Owner’s Manual.
1945220_16d_Mazda_CX-5_SSG_062315.indd 16/23/15 9:31 AM

2
1 This indicator light turns on to remind you that the front passenger’s front/side airbags and seat belt pretensioner will not deploy during a collision. The reason for
this is that the sensor has determined that an adult is not sitting in the front passenger seat.
NOTE: If a smaller adult sits on the front passenger seat, the sensors might detect the adult as being
a child depending on the person’s physique and may deactivate the front passenger’s front/side
airbags and seat belt pretensioner. Always wear your seat belt and secure children in the rear seats in
appropriate child restraints. See the Owner’s Manual for important information on this safety feature.
WIPER/
WASHER
( P. 2 8 )HAZARD
WARNING
NAVIGATION/AUDIO
(WITH MAZDA CONNECT) (PP. 17-18, 31-32)
C L I M AT E
CONTROL
( P. 3 4 )
SEAT
WARMERS
NAVIGATION

SYSTEM SD CARD
(P. 18)
PASSENGER AIRBAG OFF INDICATOR1
CLOCK
S TA R T/ S T O P BUTTON
( P P. 5 - 6 )
1945220_16d_Mazda_CX-5_SSG_062315.indd 26/23/15 9:31 AM
www.MazdaUSA.com

3
CAUTION: RED KEY indicator light may illuminate if advance key
is placed in the cup holder. The key can sometimes not be detected in the
cup holder.
ADVANCED KEYLESS ENTRY SYSTEM
This system allows you to lock and unlock the doors without taking
the key out.
While Carrying the Advanced Key…
• Unlock the driver’s door by
pushing the driver’s door request
switch once.





• Unlock all doors (and liftgate)
by pushing the driver’s door
request switch once or
twice (depending on
personalization setting)
OR by pushing the passenger’s
door request switch once.
• Lock all doors (and liftgate) by
pushing any request switch once.


• Open the liftgate by pushing
the electric liftgate opener when
ignition is OFF. With ignition ON,
vehicle must be in Park (A / T) or
have parking brake set (M/ T).
Electric Liftgate Opener
Liftgate Request Switch
Key
Lock
Unlock
Panic Alarm
Advanced KeyDoor Request Switch
1945220_16d_Mazda_CX-5_SSG_062315.indd 36/23/15 9:32 AM

4
CAUTION:
• Make sure vehicle is OFF and take the keyless entry system key with
you when leaving the vehicle.
• When locking doors using inside door switches or inside door-lock
knobs, be careful not to leave the key inside the vehicle.
Key
NOTE: Vehicles equipped with the Advanced Keyless Entry System and the
Keyless Entry System both use the same type of keyless entry transmitter.
However, only vehicles equipped with the Advanced Keyless Entry System allow
you to lock and unlock the doors/liftgate with the door/liftgate request switches
(without taking the key out of your purse or pocket).
Vehicles equipped with the Keyless Entry System do not have request switches
on the doors/liftgate. To lock and unlock the doors/liftgate, the corresponding
transmitter button must be pushed.
NOTE: When the liftgate opener switch is pushed, the liftgate will open slightly. If
the liftgate is not opened within 1.5 seconds, the liftgate latch locks (you will hear it
lock) and the liftgate cannot be opened or closed from this slightly raised position.
To open/close the liftgate, push the liftgate opener switch, open the liftgate within
1.5 seconds, then close it. The door/liftgate ajar warning light will be on if the
liftgate is not fully closed.
1945220_16d_Mazda_CX-5_SSG_062315.indd 46/23/15 9:32 AM
www.MazdaUSA.com

5
Starting The Engine
STARTING THE ENGINE WITH
ACCELERATED WARM-UP SYSTEM (AWS)
The CX-5 is equipped with SKYACTIV combustion technology.
This technology includes AWS (Accelerated Warm-up System) for
optimal emission performance during cold starting conditions.
While Carrying the Key…
• Start the engine by pushing the START/
STOP ENGINE button while pushing the
clutch pedal (M/ T) or the brake pedal (A / T).
• What you will notice? On start-up, the
engine speed and sound are higher (1500
RPM) for less than 1 minute to quickly
bring the catalyst to efficient operating
temperature. The RPM will reduce to idle
once the temperature is achieved. This is
normal engine operation under cold
start conditions.
• What this does? This heats up the catalytic converter faster to reduce
emissions and allows Mazda to use an exhaust header on the engine
(to improve efficiency and horsepower).
NOTE: Yo u can drive the vehicle during AWS activation, no need to wait.
• Shut the engine OFF by making sure the vehicle in park (A / T) and
setting the parking brake, then push the START/STOP ENGINE button.
• Activate Accessories (ACC ) by pushing the START/STOP
ENGINE button once without pushing the clutch or brake pedal.
• Turn the ignition to the ON position by pushing the START/STOP
ENGINE button twice without pushing the clutch or brake pedal.
START/STOP Button
Indicator Light
1945220_16d_Mazda_CX-5_SSG_062315.indd 56/23/15 9:32 AM

6
Emergency Engine Stop
Pushing and holding the START/STOP button or repeatedly pushing the
button while the engine is running will turn the engine OFF. Use only in case
of an emergency.
If the START/STOP ENGINE button indicator light flashes AMBER, this
could indicate a problem with the engine starting system. You may not
be able to start the engine or switch the ignition to ACC or ON. Have your
vehicle inspected at an Authorized Mazda Dealer as soon as possible.
NOTE: The engine may not start if the key cannot be detected. The Key
Indicator Light may flash RED or “Key not detected” may be displayed if the key is
placed in the cup holder.
1945220_16d_Mazda_CX-5_SSG_062315.indd 66/23/15 9:32 AM
www.MazdaUSA.com

7
Electric Parking Brake
ELECTRIC PARKING BRAKE
The electric parking brake equipment applies the parking brake using an
electric motor. The indicator light on the electric parking brake switch turns
on when the switch is turned on.
Applying the electric parking brake:
The electric parking brake can be applied regardless of the ignition switch
position. Securely depress the brake pedal and pull up the electric parking
brake switch. The electric parking brake is applied and the brake system
warning light and the electric parking brake switch indicator light turn on.
Releasing the electric parking brake:
The electric parking brake can be released while the ignition is switched
ON or while the engine is running. When the electric parking brake is
released, the brake system warning light and the electric parking brake
switch indicator light turn off.
Electric parking brake manual release:
Depress the brake pedal and press the electric parking brake switch.
Electric parking brake automatic release:
The parking brake is released automatically when
the accelerator pedal is depressed and all of the
following conditions met:
• The engine is running.
• The driver’s door is closed.
• The driver’s seat belt is fastened.
• A/T
- Selector lever is in the D, M, or R position.
• M/T
- The gear shift is in a position other
than neutral.
- The clutch pedal is depressed halfway
Indicator Light
FUEL ECONOMY:
To achieve the
best fuel economy, visit
www.fueleconomy.gov
for more information.
1945220_16d_Mazda_CX-5_SSG_062315.indd 76/23/15 9:32 AM

8
Tires
TIRE PRESSURE MONITORING SYSTEM (TPMS)
For your safety, the CX-5 is equipped with TPMS that detects low
tire pressure in one or more tires. If the tire pressure starts getting
low in one or more tires, the system alerts the driver by turning on a
light in the instrument cluster (pp. 33-34) and sounding an alarm.
What to do? Don’t ignore the TPMS warning light. Stop and check your
tire pressure (when tires are cold) and inflate them to the proper pressure.
Properly inflated tires are safer, last longer, and increase fuel economy.
In the following cases, the TPMS must be “initialized” so the system can
operate normally.
• The tire pressure is adjusted (up or down) in one or more tires.
• A tire rotation is performed.
• Any tire or wheel is replaced.
• The vehicle’s battery is disconnected, replaced or completely dead.
Initialization Process (TPMS Warning Light is Illuminated)
1 Park the vehicle in a safe place and firmly apply the parking brake.
2 Let the tires cool, then adjust the tire pressure to the specified
pressure (See tire label located on the driver’s
side door opening) on all four (4) tires.
3 Switch the ignition ON, but leave the vehicle parked.
4 Push and hold the TPMS “Set Switch”
(left side of dash) until the TPMS warning light
in the instrument cluster flashes twice and

a beep sound is heard once.
CAUTION: If the TPMS “Set Switch” is pushed without adjusting the tire
pressure, the system cannot detect the normal tire pressure. The TPMS
warning light may not turn on, even if the tire pressure is low, or it may turn
on if the tire pressure is normal.
NOTE: Drastic changes in temperature or altitude may cause the TPMS
warning light to turn on.
1945220_16d_Mazda_CX-5_SSG_062315.indd 86/23/15 9:32 AM
www.MazdaUSA.com

9
Information Display
INFO
Toggle the INFO button up or down on steering wheel to cycle through
different types of information.Push the center of
the INFO button to make selections. Push and hold the center of the INFO button
to reset the currently displayed feature such
as Average MPH or Average MPG.
Display screens
Actual displayed information will vary on your vehicle model.
Distance
to Empty Average
MPG Current
MPG Average
Speed DRSS
Information
display
1945220_16d_Mazda_CX-5_SSG_062315.indd 96/23/15 9:32 AM