clutch MAZDA MODEL CX-5 2017 (in English) User Guide
Page 314 of 664
4–170
When Driving
Cruise Control
  To increase speed using accelerator 
pedal
    Depress the accelerator pedal to accelerate 
to the desired speed. Press the SET/ 
  
switch and release it immediately.
   NOTE
  Accelerate if you want to speed up 
temporarily when the cruise control is on. 
Greater speed will not interfere with or 
change the set speed. Take your foot off the 
accelerator to return to the set speed.
   
          To Decrease Cruising Speed
    Press  the  SET/   switch and hold it. The 
vehicle will gradually slow.
  Release the switch at the desired speed.
  
  Press  the  SET/ 
  switch and release it 
immediately to adjust the preset speed. 
Multiple operations will decrease the 
preset speed according to the number of 
times it is operated.
  Decreasing speed with a single SET/ 
  
switch operation
    Instrument  cluster  display  for  vehicle 
speed indicated in km/h: 1 km/h (0.6 mph)
  Instrument cluster display for vehicle 
speed indicated in mph: 1 mph (1.6 km/h)
          To Resume Cruising Speed at  More Than 25 km/h (16 mph)
    If the cruise control system temporarily 
canceled (such as by applying the brake 
pedal) and the system is still activated, the 
most recent set speed will automatically 
resume when the RESUME/ 
  switch is 
pressed.
  If vehicle speed is below 25 km/h 
(16 mph), increase the vehicle speed up to 
25 km/h (16 mph) or more and press the 
RESUME/ 
   switch.
          To  Temporarily  Cancel
    To temporarily cancel the system, use one 
of these methods:
     Slightly depress the brake pedal.   (Manual transaxle)   Depress the clutch pedal.   Press the OFF/CANCEL switch.    
  If  the  RESUME/   switch is pressed when 
the vehicle speed is 25 km/h (16 mph) or 
higher, the system reverts to the previously 
set speed.
   NOTE
    If any of the following conditions occur, 
the cruise control system is temporarily 
canceled.
     The parking brake is applied.    (Automatic transaxle)    The selector lever is in the P or N 
position.
    (Manual transaxle)   The shift lever is in the neutral 
position.
       When the cruise control system is 
temporarily canceled by even one of the 
applicable cancel conditions, the speed 
cannot be re-set.
    (Automatic transaxle)    The cruise control cannot be cancelled 
while driving in manual mode (selector 
lever shifted from D to M position). 
Therefore, engine braking will not be 
applied even if the transaxle is shifted 
down to a lower gear. If deceleration is 
required, lower the set speed or depress 
the brake pedal.
     
CX-5_8FN1-EA-16L_Edition1.indb   1702016/12/12   10:06:19