seat memory MAZDA MODEL CX-7 2010 Smart Start Guide (in English)

34
To Program the Driver’s Seat Position
1 Parkvehicle.
2 AdjustseattodesiredpositionusingtheSlide/ TiltandReclineswitches.
3 While holding theSET button in,push oneofthe three (3)programming 
buttonsuntilabeepisheard.Programmingisnowcomplete.Program 
remainingtwobuttonsasdesired. 

NOTE: Youcanalsoprogramoneseatpositionforeachadvancedkey/retractable 
typekeyusedwiththevehicle.SeeOwner’sManualforprogramminginstructions.
To Move the Seat to a Programmed Position
 • With driver’s door OPEN and ignition OFF ,pushandreleaseone
oftheprogrammedbuttons(1,2,or3)whenenteringthevehicle.
OR
• With driver’s door CLOSED and ignition ON ,pushandholdoneof
theprogrammedbuttons(1,2,or3).
NOTE:
MemoryseatfunctionsDONOToperatewhendriver’sdoorisOPENand 
ignitionisON,whendriver’sdoorisCLOSEDandignitionisOFF,orwhenthevehicle 
isinmotion.
ELECTRON iCALLY OPERATED DR iVER SEAT CONTROLS
Returning second-row seats to upright position
1Raise seatbacks until they lock into position (red indicator is not
  visiblewhenseatisinthelockedposition).
2Pullonthetopoftheseatbacksfrominsidethevehicle 
tomakesuretheyarelocked.
3Checkthatallseatbeltsareroutedproperlyforpassengeruse. Seatback Knob
Slide/Tilt Switch
Seatcanbemoved

backandforth,raised, 
lowered, or tilted with
thiscontrol.
Recline Switch
Pushforwardorbackward 
toadjustseatbackangle.
Memor y Seat Switch
FOLD iN g SECOND-ROW SEATS
1Unfastenthelapportionoftherearcenterseatbelt.
2Supporttheseatbackwithyourhand.
3Pushtherearseatbackknobdown(redindicatorisvisiblewhen 
  seatisintheunlockedposition).
4Bringtheseatbackforward.
Seats
211069_10b_Mazda_CX-7_SSG_063009.indd 4-56/30/09 3:52:30 PM