lock MAZDA MODEL MPV 2005 (in English) User Guide

Black plate (29,1)
CAUTION
Lowering the seatback without stowing
the seat belt buckle could damage the
seatback.
3. Raise the reclining lever and lower the
seatback forward. Make sure the
seatback is locked.
To return the seatback to the upright
position
Raise the reclining lever and lift the
seatback upright. Attempt to move the
seatback forward and backward to make
sure it is locked.
qRemoval of Second-Row Seats
The second-row seats can be removed to
create a more comfortable space between
the third-row and front seats. Additional
cargo space is available with the removal
of the second-row seats and stowing of
the third-row seat.
WARNING
Seat Removal or Installation While
Vehicle is Moving or on a Slope:
Removing or installing the second-row
seats while the vehicle is moving or on
a slope is dangerous. The seats are
heavier than they appear and could
suddenly detach causing serious
injury. Remove or install the seats with
the vehicle parked on a level surface.
Riding on the Floor Space:
Riding on the floor space created by
the removal of the second-row seat is
dangerous. Sudden braking or a
collision could cause serious injury.
Do not sit or lie in the floor space for
the second-row seat while the vehicle
is moving. Never ride in a vehicle
where you can't sit in the seat and
wear the seat belt.
Pinching Fingers or Hands:
Placing your hands around the seat
anchors when removing or installing
the second-row seats is dangerous.
You could pinch your hands or fingers
between the seat anchor and the seat.
Hold the edge of the seat when
lowering it into place. Never place
your hands between the seat anchor
and the seat.
Essential Safety Equipment
Seats
2-17
Mazda MPV_8T50-EA-04G_Edition1 Page29
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G

Black plate (30,1)
WARNING
Lifting the Seat-Anchor Bar:
Lifting the seat-anchor bar without
firmly supporting the seat with your
hand is dangerous. Lifting the seat
unlocks the front clamps
automatically and could cause the seat
to fall. Support the seat firmly while
lifting the seat-anchor bar.
To remove the seat
1. Put the buckle in the pocket of the seat
bottom.
CAUTION
Lowering the seatback without stowing
the seat belt buckle could damage the
seatback.
2. Remove the head restraint.
3. Slide the seat all the way back.4. Raise the reclining lever and lower the
seatback forward.
Make sure the seatback is locked.
5. Work only on one seat at a time to
avoid one seat falling while working on
another.
6. Lift and hold the seat-anchor bar and
raise the entire seat up and forward.
2-18
Essential Safety Equipment
Seats
Mazda MPV_8T50-EA-04G_Edition1 Page30
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G

Black plate (31,1)
7. The seat is heavier than it looks,
carefully pull up and detach the seat.
Get assistance to lift it out of the
vehicle.
Loops Clamp
To install the seat
1. First identify which seat fits which
position by verifying that the seat belt
buckles are located nearest the center
of the vehicle.
2. Align the clamps on the front underside
of the seat with the forward loop
anchors on the floor and support the
seat so that it doesn't fall (the rear
portion of the seat cannot be mounted
first). The clamps on the front of the
seat automatically lock into the floor
loop anchors after lowering the seat.
LoopsClamp
Forward
3. Supporting the seat with your hands,
slowly lower the seat rearwards to lock
it in place.
Forward
4. Raise the reclining lever and lift the
seatback upright. Attempt to move the
seatback forward and backward to
make sure it is locked.
5. Insert the head restraint.
6. Buckle the seat belts once just to
confirm the seat belt buckles are
inboard which means each seat is on
the correct side of the vehicle.
WARNING
Unsecured Seat:
Driving with the seat unsecured is
dangerous. The seat may become
detached while the vehicle is moving
causing serious injury. After installing
the seat, push it forward and
backward to make sure it is securely
locked.
Essential Safety Equipment
Seats
2-19
Mazda MPV_8T50-EA-04G_Edition1 Page31
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G

Black plate (32,1)
CAUTION
Do not move the side seat-slide lever
with the seat removed. The lever could
be damaged resulting in loss of
functionality.
Third-Row Seat
WARNING
Stacking Cargo:
Stacking luggage or other cargo
higher than the seatback is dangerous.
During a sudden stop or collision,
objects can fly around and become
projectiles that could hit and injure
passengers. Don't stack cargo higher
than the seatback.
Not Securing Luggage and Cargo:
Not securing cargo while driving is
dangerous as it could move or be
crushed during sudden braking or a
collision and cause injury. Make sure
luggage and cargo is secured before
driving.
Securing Seats:
Adjustable seats that are not securely
latched are dangerous. In a sudden
stop or collision, the seat or seatback
could move, causing injury. Make sure
the adjustable components of the seat
are locked in place by attempting to
rock the seatback.
Seat Adjustment:
Adjusting the seat while the vehicle is
moving is dangerous. Sudden braking
or a collision could cause serious
injury. Adjust the seat only when the
vehicle is stopped.
2-20
Essential Safety Equipment
Seats
Mazda MPV_8T50-EA-04G_Edition1 Page32
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G

Black plate (33,1)
WARNING
Unlocked Seatback:
The seatback plays an important role
in your protection in a vehicle.
Leaving the seatback unlocked is
dangerous as it can allow passengers
to be ejected or thrown around and
baggage to strike occupants in a
sudden stop or collision, resulting in
severe injury. After adjusting the
seatback at any time, even when there
are no other passengers, rock the
seatback to make sure it is locked in
place.
Passenger on the Folded Seatback:
Driving with a passenger on the folded
seatback is dangerous. Allowing a
child to sit up on the folded seatback
while the vehicle is moving is
particularly dangerous. In a sudden
stop or even a minor collision, a child
not in a proper seat or child-restraint
system and seat belt could be thrown
forward, back or even out of the
vehicle resulting in serious injuries or
death. The child or other objects in the
baggage area could be thrown into
other occupants and cause serious
injury. Never allow a passenger to sit
or stand on the folded seatback while
the vehicle is moving.
NOTE
lThe third-row seat cannot be
removed.
lWhen returning the third-row seat to
its original position, also place the
seat belt in its normal position.
Verify that the seat belt pulls and
retracts.
qSeat Recline
WARNING
Reclining:
Sitting in a reclined position while the
vehicle is moving is dangerous
because you don't get the full
protection from seat belts. During
sudden braking or a collision, you can
slide under the lap belt and suffer
serious internal injuries. For
maximum protection, sit well back and
upright.
To change seatback angle, lean forward
slightly while pulling the flat-folding
strap. Then lean back to the desired
position and release the strap. Make sure
the seat is securely latched.
Essential Safety Equipment
Seats
2-21
Mazda MPV_8T50-EA-04G_Edition1 Page33
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G

Black plate (35,1)
1. Remove the head restraints from the
third-row seat (page 2-22).
2. Pull the third-row seat's flat-folding
strap and push the seatback down until
it locks.
qStowing the Third-Row Seat
More storage space can be created by
folding away the third-row seat into the
rear seat well. With the second-row seats
removed and the third-row seat stowed,
even more space is available.
WARNING
Riding in the Seat Well:
Riding in the seat well for the third-
row seat is dangerous. Sudden
braking or a collision could cause
serious injury. Do not sit or lie in the
seat well while the vehicle is moving.
Never ride in a vehicle where you
can't sit in the seat and wear the seat
belt.
WARNING
Pinching Fingers or Hands:
Placing your hands around the seat
stowage well when stowing the third-
row seat is dangerous. You could
pinch your hands or fingers between
the seat and the well. Hold the handle
when lowering the seat into place.
Never place your hands between the
seat and the seat well.
Unlocked Seatback:
An unlocked seatback is dangerous.
While stowing the seat, the seatback
could suddenly move causing serious
injury. Push the seatback forward and
backward to make sure it is locked in
place.
NOTE
Remove any items from the seat well
for the third-row seat before stowing the
seat. Anything in the baggage area
when the seat is set into the well can
damage the seatback material and
prevent a flat cargo area.
Essential Safety Equipment
Seats
2-23
Mazda MPV_8T50-EA-04G_Edition1 Page35
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G

Black plate (36,1)
Stowing the third-row seat
1. Insert the seat belts in the retainers.
2. Remove the head restraint and set them
aside temporarily (page 2-22).
3. Pull strap A and ease the seatback
toward the front of the vehicle with
your other hand and be sure it locks
with a click.
Strap A
4. Pull strap B and lift the combined
seatback and seat bottom up to vertical
with your other hand. Gently lower the
seat into the seat well.
Strap B
5. Insert the head restraints between the
floor and seat at the positions indicated
on the labels.
Labels
Raising the third-row seat upright for
road use
1. Clear the entire cargo floor.
2-24
Essential Safety Equipment
Seats
Mazda MPV_8T50-EA-04G_Edition1 Page36
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G

Black plate (37,1)
2. Remove the head restraints.
3. Carefully reverse the procedures used
to lower the seat into the seat well. Use
the handle and ease the combined
seatback and seat bottom up to vertical.
4. Carefully lower the seat forward and
make sure it's latched to the floor.
5. Pull strap A and raise the seatback
upright. Attempt to move the seatback
forward and backward to make sure it
is locked.
Strap A
6. Insert the head restraints.
7. Place the seat belt buckles face up.
Essential Safety Equipment
Seats
2-25
Mazda MPV_8T50-EA-04G_Edition1 Page37
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G

Black plate (40,1)
3. From inside the vehicle, carefully
lower the seat towards the front until it
locks in place. Attempt to move the
seat forward and backward to make
sure it's securely locked in place.
4. Reinsert the head restraints.
5. Place the seat belt buckles face up.
6. Fasten the shoulder belts and check
that they are routed properly for
passenger use.
Flat Folding
All seats can be folded down for use as
beds when the vehicle is safely parked.
WARNING
Folded-Flat Seats:
Sitting or lying on seats folded flat is a
dangerous way to ride. During sudden
braking or a collision you could be
thrown around inside the vehicle and
seriously injured. Don't ride on
seatbacks folded flat.
qTo Fold the Seats Flat
1. Slide the second-row seat all the way
back (page 2-13).
2. Fold down the second-row seatbacks
rearward until they lock (page 2-14).
3. Remove the head restraints from the
front seats. Refer to Head Restraint
(Manually Operated Seats)(page 2-5).
Refer to Head Restraint (Electrically
Operated Seats)(page 2-10).
2-28
Essential Safety Equipment
Seats
Mazda MPV_8T50-EA-04G_Edition1 Page40
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G

Black plate (41,1)
4. Slide the front seats all the way
forward. Refer to Seat Slide (Manually
Operated Seats)(page 2-3). Refer to
Seat Slide (Electrically Operated Seats)
(page 2-8).
5. Fold down the front seatbacks rearward
until they lock. Refer to Seat Recline
(Manually Operated Seats)(page 2-4).
Refer to Seat Recline (Electrically
Operated Seats)(page 2-9).
To return the seats to their road positions,
reverse the procedures for folding the
second-row and front seats back.
Essential Safety Equipment
Seats
2-29
Mazda MPV_8T50-EA-04G_Edition1 Page41
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G