navigation MAZDA MODEL MX-5 2016 Navigation Manual (in English)

20
2.4.4 Manipulating the map
By touching and dragging any part of the map screen, it can be moved to \
a location
close to the currently displayed map.
In addition, the map operation button is displayed, and by touching each\
of the
buttons, you can zoom in and out of maps, change the map perspective and\
select a
destination.
Action Button(s)
Description
Map movement
using touch and
drag No buttons You can move the map in any direction: select
and hold the map, and move your fi nger
towards the direction you want to move the
map.
Zooming in and
out
, Changes how much of the map is displayed on
the screen.
The navigation system uses high-quality
vector maps that let you examine the map at
various zoom levels, always with optimized
content.
Map scaling has a limit in 3D map view mode.
If you zoom out further, the map switches to
2D view mode.
Select the button once to modify the view in
large steps, or select and hold the button to
modify it continuously and smoothly.
/"7$76&&JOEC


 /"7$76&&JOEC












21
1
2
3
4
5
6
Action Button(s)Description
Tilting up and
down
, Changes the vertical view angle of the map in
3D mode.
Select the button once to modify the view in
large steps, or select and hold the button to
modify it continuously and smoothly.
Rotating left
and right
, Changes the horizontal view angle of the map.
Select the button once to modify the view in
large steps, or select and hold the button to
modify it continuously and smoothly.
Compass
The direction of the compass shows North.
Select the button to switch to North-up view,
and then select again to rotate the map in the
previous direction.
Open/close
, The UMP (menu bar) is displayed on the
lower part of the screen.
Hides the displayed UMP if the UMP has been
displayed.
Select
destination
Select this button to select the Cursor as a
new destination. The route is automatically
calculated.
Return to
normal
navigation
Select this button to move the map back to
follow the current GPS position. Automatic
map rotation is also re-enabled.
The map manipulation buttons disappear and
navigation continues.
/"7$76&&JOEC


 /"7$76&&JOEC












24
3 On-road navigation
You can set up your route in different ways:
If you need a route for immediate navigation, you can select the destina\
tion and start
navigating to it right away (normal navigation).
You can plan routes with multiple destinations. Select the fi rst destination. Then
select a second destination and add it to your route to create a multi-p\
oint route. You
can add as many destinations to your route as you like.
3.1 Selecting the destination of a route
The navigation system offers you several ways of choosing your destination:
• Enter a full address or a part of an address (page 25).
• Select a POI (point of interest) from a database as your destination (\
page 39).
• Searches the destination from the map (page 55).
• Use a previously saved Favorite destination (page 57).
• Select a location from the History of previously used destinations (pag\
e 59).
• Enter the coordinate of the destination (page 61).
There are other convenient functions.
/"7$76&&JOEC


 /"7$76&&JOEC


 








25
1
2
3
4
5
6
3.1.1 Entering an address or a part of the address
If you know at least a part of the address, it is the quickest way to se\
lect the
destination of the route.
Using the same screen, you can fi nd an address by entering:
• Destination address
• The center of a city
• An intersection
• The midpoint of a street
If an address or part of a facility name is input, a search candidate li\
st including
the input characters is displayed. The greater the number of characters input the
more the list is re fi ned.
3.1.1.1 Entering an address
To enter an address as the destination, do as follows: 1. Select
after selecting on the MAP screen.
2. Select
.
3. By default, the navigation system proposes the country and city where yo\
u are. If needed, select
, enter the fi rst few letters of the country name
on the keyboard, and select one country from the list of results.
/"7$76&&JOEC


 /"7$76&&JOEC


 








29
1
2
3
4
5
6
8. Navigation starts if is selected, or after 10 seconds of no user
interaction.
By touching the location displayed on the screen, you can verify the rou\
te.
Additionally, the route can be revised by selecting other options.
/"7$76&&JOEC


 /"7$76&&JOEC


 








32
7. Navigation starts if
is selected, or after 10 seconds of no user
interaction.
By touching the location displayed on the screen, you can verify the rou\
te.
Additionally, the route can be revised by selecting other options.
/"7$76&&JOEC


 /"7$76&&JOEC


 








35
1
2
3
4
5
6
6. The selected location is shown on the map.The system transitions to the next screen by selecting
, or it
returns to the previous screen by selecting the
button. By touching the
location displayed on the screen, you can change the destination to anyw\
here
on the map.
• : You can search for POI (point of interest) around
the selected location.
•
: The selected location can be registered to Favorites.
7. Navigation starts if
is selected, or after 10 seconds of no user
interaction.
By touching the location displayed on the screen, you can verify the rou\
te.
Additionally, the route can be revised by selecting other options.
/"7$76&&JOEC


 /"7$76&&JOEC


 








38
7. Navigation starts if
is selected, or after 10 seconds of no user
interaction.
By touching the location displayed on the screen, you can verify the rou\
te.
Additionally, the route can be revised by selecting other options.
/"7$76&&JOEC


 /"7$76&&JOEC


 








39
1
2
3
4
5
6
3.1.2 Selecting the destination from the POI (point of interest)
You can select your destination from the POI (point of interest) includ\
ed with the
navigation system.
Using the same screen, you can fi nd a POI (point of interest) in different ways:
• You can quickly fi nd a nearby POI (point of interest) by its name using the Quick
search feature.
• You can fi nd frequently searched types of POI (point of interest) with only a fe\
w
screen selects using the Preset search feature.
• You can search for a POI (point of interest) by its category.
• You can search for a POI (point of interest) by its name.
3.1.2.1 Quick search for a POI (point of interest)
If the name for a POI (point of interest) is input, a search candidate\
list is displayed.
One destination among the candidates can be selected.
• Along the recommended route if it exists or
• Around your current location if there is no destination given.
Start the Quick search function:
1. Select
after selecting on the MAP screen.
2. Select
.
3. Select .
/"7$76&&JOEC


 /"7$76&&JOEC


 








41
1
2
3
4
5
6
6. The selected location is shown on the map.The system transitions to the next screen by selecting
, or it
returns to the previous screen by selecting the
button. By touching the
location displayed on the screen, you can change the destination to anyw\
here
on the map.
• : You can search for POI (point of interest) around
the selected location.
•
: The selected location can be registered to Favorites.
7. Navigation starts if
is selected, or after 10 seconds of no user
interaction.
By touching the location displayed on the screen, you can verify the rou\
te.
Additionally, the route can be revised by selecting other options.
/"7$76&&JOEC


 /"7$76&&JOEC