navigation MAZDA MODEL MX-5 2016 Navigation Manual (in English)

61
1
2
3
4
5
6
3.1.7 Entering the coordinate of the destination
You can also select a destination by entering its coordinate as follows:1. Select
after selecting on the MAP screen.
2. In the Navigation menu, select
.
3. Input map coordinate value of and .
4. When fi nished, select .

5. Select .
/"7$76&&JOEC


 /"7$76&&JOEC


 








62
6. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it
returns to the previous screen by selecting the
button. By touching the
location displayed on the screen, you can change the destination to anyw\
here
on the map.
• : You can search for POI (point of interest) around
the selected location.
•
: The selected location can be registered to Favorites.
7. Navigation starts if
is selected, or after 10 seconds of no user
interaction.
By touching the location displayed on the screen, you can verify the rou\
te.
Additionally, the route can be revised by selecting other options.
/"7$76&&JOEC


 /"7$76&&JOEC


 








63
1
2
3
4
5
6
3.2 Checking route parameters and accessing route related functions
You can check different parameters of the route recommended by the navigation
system.1. Select
after selecting on the MAP screen.
2. The following pieces of information are displayed: • The name and/or address of the destination.
• The total time of the route.
• The total length of the route.
• The route planning method (e.g. Fast).
/"7$76&&JOEC


 /"7$76&&JOEC


 








65
1
2
3
4
5
6
3.3 Modifying the route
When navigation is already started, there are several ways to modify the\
active
route. The following sections show some of those options.
3.3.1 Selecting a new destination when already having a route: New Route, Waypoint or Final Destination
If you already have a recommended route and you select a new destination\
as
described in the above sections, the application will ask you whether to\
start a new
route, add a new waypoint (intermediate destination) to the route or a\
ppend the
newly selected destination at the end of the current route.
• Select to plan a new route to the newly selected location. The
previous destination and waypoint(s) are deleted.
• Select
to add the newly selected location as an intermediate destination
to your route. The other destinations of the route remain intact. Note: the new
waypoint is placed among destinations to keep the route optimal. To decide where
a waypoint to appear, use the Edit Route feature.
• Select
to append the newly selected destination at the end
of the route. The other destinations of the route remain intact. The previous fi nal
destination is now the last waypoint.
/"7$76&&JOEC


 /"7$76&&JOEC


 








68
4. Details of a route can be checked by selecting
.
5. Select one of the route alternatives or select to return to the previous
screen.
The navigation system recalculates the route. The orange line now shows the
new recommended route.
/"7$76&&JOEC


 /"7$76&&JOEC


 








69
1
2
3
4
5
6
3.3.4 Changing the road types used in route planning
To recalculate the active route with different road type preferences, do as follows.
These changes can also be made in Settings (page 82). 1. Select
after selecting on the MAP screen.
2. Select
.
3. Select any of the listed road types to modify the route. If needed, scro\
ll the list for all road types. You have the following options (their order depends on
the selected vehicle type):
•
- You might need to avoid highways/freeways if you
are towing another vehicle.
•
- Charge roads are pay roads where you
can purchase a pass or vignette to use the road for a longer period of
time. They can be enabled or disabled separately from toll roads.
•
- The navigation system includes toll
roads (pay roads where there is a per-use charge) in the routes by
default. If you disable toll roads, the navigation system plans the best\

toll-free route.
/"7$76&&JOEC


 /"7$76&&JOEC


 








70
•
- The navigation system includes ferries in a
planned route by default. However, a map does not necessarily contain
information about the accessibility of temporary ferries. You might also
need to pay a fare on ferries.
•
- Setting in which routes with carpool lanes
can be created or not created.
•
- A border crossing may be a shorter route
depending on the route. For this function, you can select whether or not\

to cross a border when planning the route.
•
- The navigation system excludes
unpaved roads by default: unpaved roads can be in a bad condition and
usually you cannot reach the speed limit on them.
4. The route has already been recalculated. Select
to return to the Map
screen.
Some functions are not available depending on some countries and regions\
.
/"7$76&&JOEC


 /"7$76&&JOEC


 








71
1
2
3
4
5
6
3.4 Saving a location as a Favorite destination
You can add any location to Favorites, the list of frequently used destin\
ations.
Planning a route to one of the Favorite destinations is described on pag\
e 57. 1. Select a destination as described before. It can be an address, a Place,\
any location on the map, a previously used destination from History, etc.
2. A searched destination can be registered to Favorites by selecting
on the veri fi cation screen of the destination search
results.
3.4.1 Editing the details of a Favorite destination
You can select a location that you have already saved as a Favorite and e\
dit its
details. Adding a location to the list of Favorite destinations is described on p\
age 71. 1. Press the Favorites button on the commander switch.
2. Select the Navigation tab.
3. The list of Favorite destinations is displayed.
/"7$76&&JOEC


 /"7$76&&JOEC


 








72
The following functions can be used by selecting Add/Edit Navigation
Favorite.
Add Current Location: Set the current location to Favorites.
Add Current Destination
: Register the current destination to Favorites.
Add from Contact : Register an address registered to the contacts list.
Move: Switch the Favorites order.
Delete: Delete the registered Favorites.
Your home address can be registered/changed by selecting Home.
The following functions can be used by selecting the registered Favorite\
s.
Replace with Current Location: Set the current location to Favorites.
Replace with Current Destination: Register the current destination to Favorites.
Replace with Address from Contacts : Register an address registered to the
contacts list.
Move: Switch the Favorites order.
Rename: Edit the registered Favorites name.
Delete: Delete the selected Favorites.
/"7$76&&JOEC


 /"7$76&&JOEC


 








74
4 Reference Guide
4.1 Concepts
4.1.1 Smart Zoom
Smart Zoom provides much more than just a usual automatic zoom feature: \
• While following a route: when approaching a turn, it will zoom in and raise the
view angle to let you easily recognize your maneuver at the next junctio\
n. If the
next turn is at a distance, it will zoom out and lower the view angle to\
be fl at so
you can see the road in front of you.
• While driving without an active route: Smart Zoom will zoom in if you drive
slowly and zoom out when you drive at high speed.
• Off: Turns the Smart Zoom setting off.
4.1.2 Route calculation and recalculation
The navigation system calculates the route based on your preferences:
• Route planning methods: •
: Gives a quick route if you can travel at or near the speed limit
on all roads.
•
: Gives a route that has the smallest total distance of all possible
routes.
•
: This method combines the merits of the Fast and Short
routes: The navigation system makes a calculation for the Fast route,
but it also includes other roads in the calculation in consideration of \
fuel
economy.
•
: Results in a route with fewer turns and no dif fi cult maneuvers.
With this option, you can make the navigation system take, for example,
the highway/freeway instead of a series of smaller roads or streets.
/"7$76&&JOEC


 /"7$76&&JOEC