MERCEDES-BENZ A-CLASS SALOON 2022 Owners Manual

&
WARNING Risk of entr apment when
adjusting the seat with the memory func-
tion
When the memory function adjusts the seat,
y
ou and other vehicle occupants !


To call up: pr ess and brieOy hold one of preset
position buttons 7, T or U.
Aser releasing the button, all systems are
moved into the stored position. Stowage areas
Notes on loading the vehicle
&
DANGER Risk of e
xhaust gas poisoning
Combustion engines emit poisonous exhaust
g
ases such as carbon monoxide. Exhaust
gases can enter the vehicle interior if the boot
lid is open when the engine is running, espe-
cially if the vehicle is in motion. 
Always switch oM t
he engine before
opening the boot lid. 
Never drive with the boot lid open. &
WARNING Risk of injur
y from unsecured
items in the vehicle
If objects, luggage or loads are not secured or
no
t secured suPciently, they could slip, tip over or be thrown around and thereby hit vehi-
cle occupants.
Ther

e is a risk of injury, particularly in the
event of sudden braking or a sudden change
in direction. 
Always stow objects in such a way that
t

hey cannot be thrown around. 
Before the journey, secure objects, lug-
g

age or loads against slipping or tipping
over. &
WARNING Risk of injur
y due to objects
being stowed incorrectly
If objects in the vehicle interior are stowed
incor
rectly, they can slide or be thrown around
and hit vehicle occupants. In addition, cup
holders, open stowage spaces and mobile
phone brackets cannot always retain all
objects they contain.
There is a risk of injury, particularly in the
event of sudden braking or a sudden change
in direction. 
Always stow objects in such a way that
t

hey cannot be thrown around in such
situations. 
Always make sure that objects do not
pr

otrude from stowage spaces, luggage
nets or stowage nets. 
Close the lockable stowage spaces
bef
ore starting a journey. 
Always stow and secure heavy, hard,
point
ed, sharp-edged, fragile or bulky
objects in the boot. Vehicles with automatic front passenger airbag
shut

oM: objects trapped under the front
passenger seat may interfere with the function of
the automatic front passenger airbag shutoM or
damage the system. Please observe the notes on
the function of the automatic front passenger air-
bag shutoM ( page 57). Seats and stowing
119

&
WARNING !

The driving characteristics of your vehicle are
dependent on t
he distribution of the load within
the vehicle. You should bear the following in mind
when loading the vehicle:
= never exceed the permissible gross mass or
the permissible axle loads for the vehicle
(including occupants).
Information can be found on the vehicle identi-
Ncation plate ( page 389).
= the load must not protrude above the upper
edge of the seat backrests.
= always place the load behind unoccupied
seats if possible.
= secure the load using the tie-down eyes and
distribute the load evenly.
Notes on driving with a roof load
= Evenly distribute the roof load, and place
heavy objects at the bottom. Also comply with
the notes on loading the vehicle
( page 119).
= Drive attentively, and avoid suddenly pulling
away, braking and steering as well as rapid
cornering. =
When tr ansporting roof loads and when the
vehicle is fully loaded or fully occupied, select
drive programs  and A. These are
designed to focus on stability ( page 173).
% For more information on stowage compart-
ments and s
towage areas, please refer to the
Digital Owner's Manual. Stowage spaces in the vehicle interior
Overview of the front stowage compartments
1
Stowage spaces in the doors
2 Stowage compartment in the armrest with a
multimedia and USB connection 3
Stowage compartment in the front centre
console wit
h a USB port
4 Glove compartment Through-loading feature in the rear bench seat
(EAS

Y-PACK Quickfold) Folding the rear seat backrest forwards
&
WARNING Risk of accident if t
he rear
bench seat, rear seat and seat backrest
are not engaged
The rear bench seat, rear seat and seat back-
r
est may fold forwards, even while the vehicle
is in motion.
= As a result, the vehicle occupant will be
pressed into the seat belt with increased
force. The seat belt will not be able to pro-
tect as intended and could cause addi-
tional injury.
= Objects or loads in the boot or load com-
partment cannot be restrained by the seat
backrest. Seats and stowing
121


Make sure that the rear bench seat, the
r ear seat and the seat backrest are
engaged before every trip. If the seat backrests are not engaged and locked
in place, t

he lock veriNcation indicator will be red.
Requirements: = T

o fold the centre seat backrest forwards: the
centre seat backrest has been unlocked.
You can fold the centre and outer seat backrests
forwards separately. Vehicles with a memory function:
if necessar
y,
when the seat backrest in the rear is folded
forward, the corresponding front seat will move
forwards slightly to avoid a collision. 
If necessary, fully insert the head restraints in
t

he rear seat backrest.
The release handles are located beneath the rear
shelf. 
To fold the les and r
ight seat backrests
forward: pull right or les release handle 1
and fold the corresponding seat backrest for-
wards. 
To fold the centre seat backrest forwards: pull
r
elease catch 3 of seat backrest 2 for-
wards. 
Fold seat backrest 2 f
orwards.122
Seats and stowing


If necessary, reset the driver's or front
passeng er seat.
Folding back the rear seat backrest &
WARNING Risk of becoming tr
apped when
adjusting the seats
When you adjust a seat, you may trap yourself
or a v
ehicle occupant. 
When adjusting a seat, make sure that
no one has an
y body parts in the sweep
of the seat. *
NOTE Damag
e caused by trapping the
seat belt when folding back the seat back-
rest The seat belt could become trapped and thus
be damag

ed when the seat backrest is folded
back. 
Make sure that the seat belt is not trap-
ped when f
olding back the seat backrest. 
Move the driver's or front passenger seat for-
w

ards, if necessary. 
Fold the corresponding seat backrest 1 bac
k
until it engages.
Les and right seat backrests: if the seat back-
rest is not engaged and locked in place, the
red lock veriNcation indicator 2 will be visi-
ble.
Centre seat backrest: if the seat backrest is
not engaged and locked in place, the red lock
veriNcation indicator 3 will be visible. Locking the release catch of the centre rear seat
bac

krest
Requirements: = The les and centre seat backrests are
engaged and joined together.
You can lock the centre seat backrest release
catch if you want to secure the boot against unau-
thorised access. The centre seat backrest can
then be folded forwards only together with the les
seat backrest. Seats and stowing
123


Fold the centre and les seat bac krests for-
wards. 
To lock or unlock: slide catc
h 1 upwards or
downwards. Overview of the tie-down eyes
Observe the notes on loading the vehicle
(
 pag

e 119). 1
Tie-down eyes (vehicles with through-loading
f
eature in the rear bench seat) Attaching a roof luggage rack
&
WARNING Risk of accident due t
o exceed-
ing the maximum roof load
The vehicle centre of gravity and the usual
dr
iving characteristics as well as the steering
and braking characteristics alter.
If you exceed the maximum roof load, the driv-
ing characteristics, as well as steering and
braking, will be greatly impaired. 
Never exceed the maximum roof load
and adjus

t your driving style. You will
Nnd inf
ormation on the maximum roof
load in the "Technical data" section.
* NOTE Damag
e to the vehicle due to not
observing the maximum permitted head-
room clearance If the vehicle height is greater than the maxi-
mum per
mitted headroom clearance, the roof
and other parts of the vehicle may be dam-
aged. 124
Seats and stowing


Observe the signposted headroom clear-
ance. 
If the vehicle height is greater than the
per mitted headroom clearance, do not
enter. 
Observe the changed vehicle height with
add-on r
oof equipment. *
NOTE V
ehicle damage from non-approved
roof luggage racks The vehicle could be damaged by roof luggage
r

acks that have not been tested and approved
for Mercedes-Benz. 
Use only roof luggage racks tested and
appr

oved for Mercedes-Benz. 
Depending on the vehicle equipment,
ensur

e that the sliding sunroof can be
fully raised when the roof luggage rack is
Ntted. 
Depending on the vehicle equipment,
ensur

e that the boot lid can be fully opened when the roof luggage rack is
Nt-
t
ed. 
Position the load on the roof luggage
r
ack in such a way that the vehicle will
not sustain damage even when it is in
motion. *
NOTE Damag
e to the panorama sliding
sunroof due to non-approved roof luggage
racks The panorama sliding sunroof may be dam-
ag

ed by the roof luggage rack if you attempt to
open it when using a roof luggage rack not
tested and approved for Mercedes-Benz. 
When a roof luggage rack is Ntt
ed, open
the panorama sliding sunroof only if this
has been tested and approved for
Mercedes-Benz.
The panorama sliding sunroof may be raised
t
o allow ventilation of the vehicle interior. *
NOTE Damag
e to the covers The covers may be damaged and scratched
when being opened. 
Do not use metallic or hard objects. 
Carefully fold covers 1 upw
ards in the direc-
tion of the arrow. Seats and stowing
125


Secure the roof luggage rack to the fastening
points beneat
h covers 1. 
Comply with the installation instructions of the
r
oof luggage rack manufacturer. 
Secure the load on the roof luggage rack. Sockets
Using the 12 V socket
Requirements:
= Onl

y devices up to a maximum of 180 W
(15 A) are permissible.
Depending on the vehicle equipment, the vehicle
has the following 12 V sockets: = In the stowage compartment in the front
centre console
= In the boot Example: 12 V socket in the stowage compartment
in t he front centre console 
Fold up socket cap 1. 
Insert the plug of the device.
12 V socket in the stowage compartment with
co
ver: if you have connected a device to the 12 V
socket, leave the cover of the stowage compart-
ment open. Using the 115 V socket in the rear passenger
com

partment &
DANGER Risk of f
atal injuries due to a
damaged connecting cable or a damaged
socket
You could receive an electric shock if the con-
necting cable or t
he 115 V power socket is
pulled out of the trim or is damaged or wet. 
Use only connecting cables that are dry
and fr

ee of damage. 
When the vehicle is switched oM, mak
e
sure that the 115 V power socket is dry. 
Immediately have the 115 V power
soc

ket checked or replaced at a qualiNed
specialised workshop if it is damaged or
has been pulled out of the trim. 
Never plug the connecting cable into a
115 V po

wer socket that is damaged or
has been pulled out of the trim. 126
Seats and stowing

&
DANGER Risk of deat h due to using the
socket incorrectly
In particular, you could receive an electric
shoc
k:
= if you touch the inside of the socket
= if you insert unsuitable devices or objects
into the socket 
Do not touch the inside of the socket. 
Only connect suitable devices to the
soc

ket. Make sure that no liquids get into the 115 V
soc
ket.
When the 115 V socket is not in use, keep the
socket Oap closed.
Requirements: = The de

vice is equipped with a suitable plug
which conforms to the standards speciNc to
the country you are in.
= A device up to a maximum of 150 W (1.3 A) is
used.
= Do not use multiple socket outlets. 
Open socket Oap 3. 
Insert the plug of the device into 115 V socket
1.
When t
he on-board electrical system voltage is
suPcient, indicator lamp 2 lights up. USB port in the rear passenger compartment
%
Depending on the vehicle equipment, the
design of t

he stowage compartment and the
number of USB ports in the rear centre con-
sole may vary.
When the vehicle is switched on, you can charge a
USB de
vice, such as a mobile phone, at USB ports
using a suitable charging cable. Wireless charging of the mobile phone and con-
nection wit

h the exterior aerial Notes on wirelessly charging the mobile phone
&
WARNING Risk of injur
y due to objects
being stowed incorrectly
If objects in the vehicle interior are stowed
incor
rectly, they can slide or be thrown around
and hit vehicle occupants. In addition, cup
holders, open stowage spaces and mobile
phone receptacles cannot always retain all
objects within. Seats and stowing
127