ECO mode MERCEDES-BENZ B-CLASS HATCHBACK 2021 User Guide

D
D
YN
YNAMIC SELECT switch AMIC SELECT switch F
F
unction of t
unction of t he D
he DYN
YNAMIC SELECT switchAMIC SELECT switch %
Depending on the engine and equipment, the
ve hicle has di.erent drive prog rams.
Use theDY NAMIC SELECT switch tochange
between thefo llowing drive prog rams.
The drive prog ram selected appears in the inst ru-
ment displa y.
= Individual
R Individual settings
C Sport
R Continues too.er stability but with a sporty
setup
R Allo ws th e sporty driver a more active driving
style
R Driving with the combustion engine and rein-
fo rc ed boost e.ect (plug-in hybrid)
R Deactivation of the combustion engine when
stationary (plug-in hybrid)
R Only suitable for good road conditions, a dry
ro ad sur face and a clear st retch of road A
Comfort
R Comfor table and economical driving
R Balance between traction and stability
R The selection of the matching drive type by
th ehy brid system depends on the driving con-
ditions and the distance (plug-in hybrid)
R Recommended for all road conditions
Î Electric (plug-inhybrid)
R Electric mode – driving without the combus-
tion engine is possible up toappr ox.
140 km/h
R Adjustable recuperation in overrun mode
R Adaptation of Active Distance Assist
DISTRONIC for electric mode
R Depending on the equipment, the maximum
set speed for cruise control, limiter and Active
Distance Assist DISTRONIC can be limited to
th e maximum electrically drivable speed
R Activation of the combustion engine via the
pressure point of the accelerator pedal (kic k-
down) Ï
Battery Level (plug-inhybrid)
R Prioritised maintenance of the state of charge
of the high-voltage batter y,e.g. for subse-
qu ent journe ysinthe inner city/low emission
zones
R The selection of the matching drive type by
th ehy brid system depends on the driving con-
ditions and the distance
; Eco
R Only available forve hicles with automatic
transmission
R Particular lyeconomical driving
R Balance between traction and stability
R Recommended for all road conditions
R Full de velopment of all intelligent hybrid func-
tions and adap tation of the coasting charac-
te ristics of theve hicle totra1c (plug-in hybrid)
R The selection of the matching drive type by
th ehy brid system depends on the driving con-
ditions and the distance (plug-in hybrid) 182
182
Driving and parking

R
You open the driver's door when theve hicle is
at a standstill or when driving at a very low
speed and the transmission position is 005Bor
005E.
% Tomanoeuv rewith an open driver's door,
open the driver's door while at a standstill and
engage transmission position 005Bor005E again.
% Atvery low outside temp eratures below
appr ox. -20°C, you may not be able toshiT
th e transmission from 005Dtoano ther trans-
mission position when theve hicle is switched
o.. If this is the case, only change the trans-
mission position while theve hicle switched
on.
Eng
Eng aging dr
aging dr iv
ive position D
e position D #
Depress the brake pedal and push the DIRECT
SELECT le ver down past the /r stpoint of
re sis tance.
When the automatic transmission is in transmis-
sion position 005B, it shiTsthege ars automaticall y.
This depends, among other things, on thefo llo w-
ing factors:
R The selected drive prog ram R
The position of the accelerator pedal
R The driving speed Pr
Pr
oblems wit
oblems wit h t
h the tr
he tr ansmission
ansmission The tr
The tr
ansmission has a f
ansmission has a f aulty g
aulty gear
earshiT
shiT
Po ssible cause:
R the transmission is losing oil. #
Have the transmission checked at a quali/ed
specialist workshop immediatel y.
The acceler
The acceler ation c
ation char
har act
acter
eris
istics ge
tics get wt w or
orse, and
se, and
t
t he tr
he tr ansmission no long
ansmission no long er
ershiTs.
shiTs.
Po ssible cause:
R the transmission is in emer gency ope ration
mode. #
Stop theve hicle in accordance with the tra1c
conditions. #
ShiT the transmission toposition 005D. #
Switch o. theve hicle. #
Wait at least ten seconds. #
Start theve hicle again. #
ShiT the transmission toposition 005B. #
Have the transmission checked at a quali/ed
specialist workshop immediatel y. Manual
Manual
g
gear
ear shiTing
shiTing %
For plug-in hybrids, obser vethe information
re ga rding there ge nerative brake system
(/ page 178). When
the automatic transmission is shiTed to
position 005B,you can manually shiT it with the
stee ring wheel gearshiT paddle. If permitted, the
automatic transmission shiTs toa higher or lo wer Driving and parking
189
189

ge
ar depending on the steering wheel gearshiT
paddle being pulled.
Yo u ha vetwo options tomanually shiT the auto-
matic transmission:
R Temp orary setting
R Perm anent setting
The gears shiT automatically when manual shiTing
is deactivated.
T
T em em por
por ar
ary se
y se tting:
tting: #
T
To activ
o activ at
ate:
e: Pull steering wheel gearshiT pad-
dle 1 or2.
Manual shiTing is activated for a short time.
The transmission position display sho ws0063
and the cur rent gear.
% How long the manual shiTing st ays activated
is dependant on various factors.
Manual shiTing can be automatical lydeactiva-
te d in thefo llowing cases:
R Changing the drive prog ram
R Restarting theve hicle
R When the transmission position 005Bis
engaged again R
Driving style #
T
T o
o shiT
shiT up:
up:Pull steering wheel gearshiT pad-
dle 2. #
T
T o
o shiT
shiT do
down:
wn: Pull steering wheel gearshiT
paddle 1.
If yo u pull and hold the steering wheel gear-
shiT paddle 1,the transmission shiTs tothe
lo we st possible gear. #
T
T o deactiv
o deactiv at
ate:
e: Pull steering wheel gearshiT
paddle 2and hold it in place.
The transmission position displ aysho ws005B.
P
P er
er manent se
manent se tting:
tting: #
Change todrive prog ram =(/ page 183). #
Select drive setting 0063(/ page 184). Gear Gear
shiT
shiT r
recommendation
ecommendation The
gearshiT recommendation assists you in
adopting an economical driving style. #
Ifth ege arshiT recommendation 1appears
next tothe transmission position displa y,shiT
to there commended gear. Using kic Using kic
kdo
kdown
wn #
Maximum acceler
Maximum acceler ation:
ation:depress the accelera-
to r pedal be yond the pressure point.
To protect against engine overrev ,th e automatic
transmission shiTs up tothe next gear when maxi-
mum engine speed has been reached. Glide mode function
Glide mode function190
190
Driving and parking

Wi
th an anticipatory driving st yle, Glide mode
helps youto reduce fuel consum ption.
Glide mode is characterised bythefo llowing:
R The combustion engine is disconnected from
th e driv etra in and continues torun in neutral.
R The transmission position display 005Bis sh own
in green.
Glide mode is activated if thefo llowing conditions
are met:
R Drive prog ram ; is selected.
R The speed is within a suitable range.
R The road's course is suitable, e.g. no steep
uphill or downhill inclines or tight bends.
R There is no trailer hitched up tothe trailer
hitch, and no bicycle rack Fitted.
R You do not depress the accelerator or brake
pedal (e xcept for light brake applications).
% Glide mode can also be activated if you ha ve
selected the "Eco" setting forth e drive in the
drive prog ram =.
Glide mode is deactivated again if one of the con-
ditions is no longer met. V
V ehicles wit ehicles wit h A
h Activ
ctiv e Dist
e Dist ance Assis
ance Assist DIS t DISTR
TRONIC:
ONIC:
when Active Distance Assist DISTRONIC is acti ve,
th e glide mode function is not available.
Glide mode can also be pr evented bythefo llowing
parame ters:
R Incline
R Downhill gradient
R Temp erature
R Height
R Speed
R Operating status of the engine
R Tra1c situation
% Glide mode can be ended bypressing a steer-
ing wheel gearshiT paddle (/ page 189). F
F
unction of t
unction of t he 4MA
he 4MATIC
TIC
4MATIC ensu resth at all four wheels are driven.
To get her with ESP ®
and 4ETS, 4MATIC impr oves
th e traction of your vehicle whene ver a driven
wheel spins due toinsu1cient traction. If
yo ufa ilto adapt your driving style, 4MATIC can
neither reduce therisk of an accident nor override
th e la wsof ph ysics. 4MATIC cannot take account
of road, weather and tra1c conditions. 4MATIC is
only an aid. You are responsible especially for
maintaining a safe distance from theve hicle in
front, forve hicle speed, for braking in good time
and for st aying in lane.
% In wintry road conditions, the maximum e.ect
of 4MATIC can be achie ved only if you use
winter tyres (M+S tyres), with snow chains if
necessar y. R
R
efuelling
efuelling R
R
efuelling t
efuelling t he v
he vehicle
ehicle &
W WARNING
ARNING Risk of /re or explosion from
fuel
Fu els are highly 0ammable. #
Fire , naked 0ames, smoking and creating
spar ksmust be avoided. Driving and parking
191 191

Char
Char
ging t
ging t he high-v
he high-v olt
oltag
age batt
e batt er
ery (plug-in
y (plug-in
h
h ybr
ybr id)
id) N
No
ot
tes on c
es on c har
harging t
ging t he high-v
he high-v olt
oltag
age batt
e batt ery
ery *
N
NOOTE
TE High-voltage battery damage due to
leaving theve hicle idle for lengt hyperiods
of time Lithium-ion batteries
experience a natural self-
dischar ge.
Exhausti vedischarging can therefore occur if
th eve hicle is idle for se veral months. This can
damage the high-voltage batter y.#
Toavo id damage, please obser vethefo l-
lowing recommendations when handling
th e high-voltage batter y.*
N
NO
OTE
TE Accelerated ageing of the high-volt-
age battery As a
result of its basic characteristics, the
storage capacity of and the amount of energy
av ailable from the high-voltage battery
decrease over the course of its life. Due to th
is, bo th the maximum electrical range that
can be achie vedby theve hicle and its maxi-
mum elect rical output can be impaired.
The following factors could accelerate the age-
ing of the high-voltage batter y:
R a high le vel of charge , especially if the
ve hicle is idle for a lengt hyperiod of time
R frequent rapid charging with direct cur rent
(mode 4)
R leaving theve hicle idle for lengt hyperiods
at high ambient temp eratures #
Toavo id accelerated ageing, please
obser vethefo llowing recommendations
when handling the high-voltage batter y. Re
commendations when handling the high-voltage
batter y:
R Only charge the high-voltage battery with
direct cur rent (mode 4) if necessar y.
R If leaving theve hicle idle for lengt hyperiods,
park up theve hicle with a high- voltage battery
ch arge leve l between 25% and 30%. Do not ke
ep the high-voltage battery continuously
connected topowe r supply equipment.
R If leaving theve hicle idle for lengt hyperiods of
time avoid, if possible, high ambient temp era-
tures.
R Check the high-voltage battery's charge level
ev ery six weeks (/ page 214).
R Char gethe high-voltage battery if thech arge
le ve l is below 15%.
R Do not disconnect the 12 V battery even if the
ve hicle is leT idle for a lengt hyperiod. Other-
wise, the condition of theve hicle's high- volt-
age battery cannot be monitored.
Depending on the equipment and national ver-
sion, your vehicle is equipped with one of thefo l-
lowing vehicle soc kets:
R Type 1 forch arging with alternating cur rent
(mode 2/3)
R Type Combo 1 forch arging with alternating
cur rent (mode 2/3) and charging with direct
cur rent (mode 4)
R Type 2 forch arging with alternating cur rent
(mode 2/3) 198
198
Driving and parking

It is
recommended that youch arge the high-volt-
age battery at a wallbox or charging station due to
th e impr ovedch arging per form ance and better
ch arging e1ciency o.ered.
S
S t
to
o wing t
wing t he c
he char
harging cable
ging cable
Alw ays st owtheve hicle charging cable in the
ch arging cable bag pr ovided and secure it in the
boot or load compartment of your vehicle.
Otherwise, thech arging cable is not su1ciently
secured.
Syst
Syst em limits em limits
The po wer output of the high-voltage battery may
be impaired bythefo llowing:
R High or low outside temp eratures
R Electrical auxiliary consumers in theve hicle
being switched on, e.g. operating the air con-
ditioning system
R Extended periods without charging
The charging time of the high-voltage battery may
be increased bythefo llowing:
R High or low outside temp eratures
R Extended periods without charging R
The maximum available charge cur rent of the
ch arging facility
R The charging cur rent set (mode 2) in the multi-
media system (/ page 301) N
No
ot
tes on c
es on c har
harging t
ging t he high-v
he high-v olt
oltag
age batt
e batt er
ery at t
y at t he
he
mains soc ke
mains soc ket (mode 2)
t (mode 2) &
D
DAN
AN GER
GER Risk of fatal injury from incor-
re ctly ins talled component parts
Connecting thech arging cable toa mains
soc ket using incor rectly ins talled component
parts could cause a /re or an electric shoc k,
fo rex ample. #
Only connect thech arging cable to a
mains soc ketth at:
R Has been proper lyinstalled and
R Has been inspected byaqu ali/ed elect ri-
cian #
For saf etyre asons, only use thech arging
cable supplied with theve hicle or an
original Mercedes-Benz charging cable. #
Purchase these parts at a Mercedes-
Benz Service Centre and obtain advice
th ere.
Mercedes-Benz thoroughly tests these original
ch arging cables forth eir suitability for high-
vo ltage charging of your vehicle. #
Never use a damaged charging cable. #
Do not use:
R Extension cables
R Extension reels
R Multiple soc kets #
Never use soc ket ada pters toconnect
th ech arging cable tothe mains soc ket.
The only exception being if the adap ter
has been tested and appro vedby the
manufacturer forch arging the high-volt-
age battery of an electric vehicle. #
Obser vethe saf ety no tes in the operat-
ing inst ructions forth e soc ket ada pter. Only
thefo llowing charging cables may be used:
R The charging cable supplied with theve hicle. 200 200
Driving and parking

Ov
Ov
er
ervie
vie w of t
w of t he loc
he loc king st
king st atus
atus Loc
Loc
king st
king st a-
a-
tus
tus 3
3 Display
Display Meaning
Meaning
0036 Lights up
whiteVe
hicle
soc ket
unloc ked,
insert or
re mo vecharg-
ing cable
0036 Flashes whiteMalfunction
during locking
or unlocking Ov Ov
er
ervie
vie w of t
w of t he c
he char
harging pr
ging pr ocess st
ocess st atus
atus S
S
t
tatus of t
atus of t he
he
c
c har
har ging
ging
pr
pr ocess
ocess 2
2 Displ
ay
Display Meaning
Meaning
003D Flashes
orangeConnection is
being estab-
lished
003D Flashesgreen Active energy
0ow S S
t
tatus of t
atus of t he
he
c
c har
har ging
ging
pr
pr ocess
ocess 2
2 Display
Display
Meaning
Meaning
003D Lights up
orangeInter
ruption in
ch arging
003D Lights up
green Charging
process com-
ple
ted
003D Flashesred
(for appr ox.
90 s) Ve
hicle mal-
function;
ch arging is
not possible S S
t
tar
ar ting t
ting t he alt
he alt er
ernating curr
nating curr ent c
ent c har
harging pr
ging pr ocess
ocess
(mode 2/3)
(mode 2/3) &
D
DAN
AN GER
GER Risk of death when charging at a
damaged soc ket
The charging process uses high voltage. If
th ech arging cable, theve hicle soc ket or the
mains soc ket are damaged, you could receive
an elect ric shoc k. #
Only use an undamaged charging cable. #
Avoid mechanical damage such as crush-
ing, abrading or driving overth e cable. #
Have a damaged vehicle soc ketre placed
at a quali/ed specialist workshop as
soon as possible. #
Never connect thech arging cable to a
damaged vehicle soc ket. *
N
NOOTE
TE Damage due toove rheating of
ch arging cable and charging cable con-
nector During
thech arging process, thech arging
cable and charging cable connector can heat
up within their permissible limit values. 206
206
Driving and parking

The permissible limit
values are in0uenced by
th efo llowing factors:
R the po wer supply system and thech arging
cable are not damaged
R the inst ructions for handling thech arging
cable and the control element on the
ch arging cable ha vebeen obser ved #
Ifth ech arging cable or charging cable
connector becomes too hot, ha vethe
po we r supply system checked. *
N
NO OTE
TE Damaged or dirty vehicle soc ket
when the soc ket 0ap is open #
Alwayske ep the soc ket co ver and the
soc ket 0ap closed when there is no
ch arging cable connected. This pr otects
th eve hicle soc ket from dirt and damage. #
Make sure that the soc ket co ver is
closed proper lybefore closing the soc ket
0ap. This can otherwise result in damage
which may pr event the soc ket 0ap from
being opened again. *
N
NOOTE
TE Damage totheve hicle soc ket or the
ch arging cable connector due toincor rect
handling Do not use
excessive forc e (maximum 300 N)
to insert thech arging cable connector into the
ve hicle soc ketto the stop. You may otherwise
damage theve hicle soc ket,thech arging cable
connector or their contacts. #
Ifyo ufe el there is increased resis tance,
pull thech arging cable connector out of
th e soc ket and reinsert it. R
R
eq
eq uir
uir ements:
ements:
R The transmission is in position 005D.
R The vehicle is unloc ked or the distance
between theke y and theve hicle does not
ex ceed 1 m.
R The vehicle is switched o.. The õdisplay
in the Instrument Display is o..
R The charging cable is not taut. Depending on
theve hicle's equipment and on the
national version, your vehicle is equipped with one
of thefo llowing vehicle soc kets:
R Type 1 forch arging with alternating cur rent
(mode 2 or 3)
R Combo 1 forch arging with alternating cur rent
(mode 2 or 3) and charging with direct cur rent
(mode 4)
R Type 2 forch arging with alternating cur rent
(mode 2 or 3)
R Combo 2 forch arging with alternating cur rent
(mode 2 or 3) and charging with direct cur rent
(mode 4) Driving and parking
207
207

S
S
t
tar
ar ting t
ting t he dir
he dir ect curr
ect curr ent c
ent char
harging pr
ging pr ocess
ocess
(mode 4)
(mode 4) &
D
D AN
AN GER
GER Risk of death when charging at a
damaged soc ket
The charging process uses high voltage.
If th ech arging cable, theve hicle soc ket or the
mains soc ket are damaged, you could receive
an elect ric shoc k. #
Only use an undamaged charging cable. #
Avoid mechanical damage such as crush-
ing, abrading or driving overth e cable. #
Have a damaged vehicle soc ketre placed
at a quali/ed specialist workshop as
soon as possible. #
Never connect thech arging cable to a
damaged vehicle soc ket. *
N
NOOTE
TE Damage due toove rheating of
ch arging cable and charging cable con-
nector During
thech arging process, thech arging
cable and charging cable connector can heat
up within their permissible limit values.
The permissible limit values are in0uenced by
th efo llowing factors:
R the po wer supply system and thech arging
cable are not damaged
R the inst ructions for handling thech arging
cable and the control element on the
ch arging cable ha vebeen obser ved #
Ifth ech arging cable or charging cable
connector becomes too hot, ha vethe
po we r supply system checked. *
N
NOOTE
TE Damaged or dirty vehicle soc ket
when the soc ket 0ap is open #
Alwayske ep the soc ket co ver and the
soc ket 0ap closed when there is no ch
arging cable connected. This pr otects
th eve hicle soc ket from dirt and damage. #
Make sure that the soc ket co ver is
closed proper lybefore closing the soc ket
0ap. This can otherwise result in damage
which may pr event the soc ket 0ap from
being opened again. *
N
NOOTE
TE Damage totheve hicle soc ket or the
ch arging cable connector due toincor rect
handling Do not use
excessive forc e (maximum 300 N)
to insert thech arging cable connector into the
ve hicle soc ketto the stop. You may otherwise
damage theve hicle soc ket,thech arging cable
connector or their contacts. #
Ifyo ufe el there is increased resis tance,
pull thech arging cable connector out of
th e soc ket and reinsert it. R
R
eq
eq uir
uir ements:
ements:
R The transmission is in position 005D. Driving and parking
211
211

Yo
u can limit the speed as follo ws:
R V
Var
ar iable:
iable: for a short-term speed restriction,
e.g. in built-up areas
R P
P er
er manent
manent :
:fo r a longer-term speed restric-
tion, e.g. in winter ty remode
Yo u can store any speed abo ve20 km/h up tothe
maximum design speed or up tothe set winter
tyre limit. You can also per form settings while the
ve hicle is stationary if theve hicle has been star-
te d.
Obser vethe no tes on driving systems and your
re sponsibility; you may otherwise failto recognise
dangers (/ page 223).
Display
Display s in t
s in the Ins
he Ins tr
trument Display
ument Display
R 00CB (gre y): variable limi ter is selected but not
yet activated.
R 00CB (0ashes grey ):va riable limi ter is temp o-
rari lypassive.
R 00CB (gre en): variable limi ter is activated.
A stored speed appears along with the00CB dis-
pla y.The segments in the speedome ter light up,
up tothe cur rently stored speed. If
yo u depress the accelerator pedal be yond the
pressure point (kickdown), theva riable limi ter
switches topassive mode. The Limiter passive
message appears in the Instrument Display and
th e00CB display 0ashes.
The variable limi ter is reactivated in thefo llowing
situations:
R Ifth eve hicle speed drops below the stored
speed.
R Ifth e stored speed is called up.
R Ifyo u store a new speed.
Oper
Oper ating cr
ating cr uise contr
uise contr ol or t
ol or the v
he var
ariable limit
iable limit er
er &
W
W ARNING
ARNING Risk of accident due tostored
speed
If yo u call up the stored speed and this is
lo we rth an your cur rent speed, theve hicle
decelerates. #
Take into account the tra1c situation
before calling up the stored speed. R
R
eq
eq uir
uir ements:
ements:
Cruise control R Cruise control is selected.
R ESP ®
must be activated, but not inter vening.
R The vehicle speed is at least 20 km/h.
R The transmission is in position 005B.
Va riable limi ter
R The variable limi ter is selected. Driving and parking
233
233