light MERCEDES-BENZ C-Class 2003 W203 Comand Manual

90 TelephoneTelephone operationIf the input line is empty
Turn the right-hand rotary/push-button
v until 2 is highlighted and press the
button.
The “Phone book” selection menu will
appear (
page 87).
Phone book page (phone numbers)3Phone book entries sorted according to
memory locations
Memory locations available:
M01 - M99
4Page back in the list, if filled
5Page forward in the list, if filled

Turn the right-hand rotary/push-button
v to highlight the desired entry and
press to confirm.
The main telephone menu appears indi-
cating the selected phone number and
memory location.
Begin dialing (
page 88), then con-
ducting a call.
Ending a call (page 89).
P82.85-9135-313
45
iIf there is no entry in the numbers list,
the message “No entry in telephone
book” appears in the telephone menu.

93 Telephone
Telephone operation
Dialing with COMANDRedial memory list1Memory locations L01 - L10
L01 the last number or name
dialed
L02 - L10 numbers or names dialed
previously

Turn the right-hand rotary/push-button
v to highlight “Last Calls” in the main
telephone menu and press to confirm.
or
if there is a blank input line in the main
telephone menu

Press the right-hand rotary/push-
button v when the “Send” button is
highlighted.
The “Last Calls” menu will appear.

Turn the right-hand rotary/push-button
v to highlight the desired phone num-
ber or name and press to confirm.
The main telephone menu appears with
the desired phone number or name.
P82.85-9137-31
1
iIf there is no entry in the numbers list,
the message “No entry in list” appears
in the telephone menu.
P82.85-9138-31

94 TelephoneTelephone operationBegin dialing
Press the right-hand rotary/push-
button v to confirm the “Send” but-
ton.
The message “Dialing” will appear. The
“End” button is highlighted.
Use one of these three ways, to end a call:

Press the right-hand rotary/push-
button v to confirm the “End” button
or the call has been finished by the
other party.
or

Press a.
or

Press *.Dialing from calls list
Incoming calls memory
Turn the right-hand rotary/push-button
v to highlight “Calls” in the main tele-
phone menu and press to confirm.
The incoming calls memory will appear.

Turn the right-hand rotary/push-button
v to select the desired phone number
or name and press to confirm.
The main telephone menu appears indi-
cating the number or name selected.
Begin dialing, ending a call, see above.
P82.85-9139-31

97 Telephone
Telephone operation
You can enter a telephone number in the
notebook or edit an existing one

during a conversation


in the main telephone menu without
having a callOpening the notebook
The main telephone menu is displayed

Turn the right-hand rotary/push-button
v to highlight the “V” symbol and
press to confirm.
Other menu fields will appear.

Turn the right-hand rotary/push-button
v until “Notebook” is highlighted and
press to confirm.
Entering the telephone number

Press number keys 1 through 0, u
and t.
Correcting input
To delete only the last digit

Press r briefly.
To delete the whole entry

Press r longer than 2 seconds.Closing the notebook and storing input

Press *.
Dialing a telephone number from
the notebook

Open the notebook.

When the notebook phone number ap-
pears, press the right-hand rotary/
push-button v to confirm the “Send”
button.
Dialing begins.
Notebook
P82.85-9143-31
iYou can transfer the notebook phone
number to the phone book
(page 102).

98 TelephoneTelephone operationYou can edit the phone book and transfer
a phone number from the notebook.
In the main telephone menu, turn the
right-hand rotary/push-button v until
“Phone book” is highlighted and press
to confirm.
The “Phone book” selection menu will
appear.
“Phone book” selection menu1Changing entries in the phone book
2Adding entries in the phone book
(
page 101)
3Transferring a telephone number from
the notebook (
page 102)Changing entries in the phone book

Turn the right-hand rotary/push-button
v to highlight 1 and press to confirm.
The phone book will either display

the list of names sorted alphabeti-
cally


the list of phone numbers sorted by
memory locations.
Editing the phone book
P82.85-9144-31
3
1
2
P82.85-7589-31

99 Telephone
Telephone operation
Changing a name
4Phone book entry selected
5Character list
6Zoom
7Confirming the changed entry
8Deleting the entry
Turn the right-hand rotary/push-button
v to highlight the desired phone book
entry and press to confirm.
An input menu appears.

Turn the right-hand rotary/push-button
v to highlight the desired letters one
by one and press to confirm.
The name will appear in the input line.
The input cursor indicates the current
input position.
Correcting an input
Deleting the last digit

Press r briefly.
Deleting the whole entry

Press r longer than 2 seconds.Input with number keys

Select a character by pressing the key
as listed below the corresponding num-
ber of times.
P82.85-9145-31
4
5
6
7
8
iYou can enter up to 20 characters.iYou can also select characters using
the number keys. Each number key has
more than one assignment. See table.
Key
Character
1
,
.
-
1
:
‘
/
2
A
B
C
2
3
D
E
F
3
4
G
H
I
4
5
J
K
L
5
6
M
N
O
6
7
P
Q
R
S
7
8
T
U
V
8
9
W
X
Y
Z
9
0
0
u
Blank

100 TelephoneTelephone operationThe selected character is automatically ad-
opted in the input line after 2 seconds
or
Press t or turn the right-hand rotary/
push-button v.
Storing changed names
Use one of these ways

Turn the right-hand rotary/push-button
v until “Apply” is highlighted and
press to confirm.
or

Press the right-hand rotary/push-
button v longer than 2 seconds to
confirm the last letter of the name.
Now change the phone number.
If you do not wish to save the changes

Press *.Changing a telephone number
9Current name or name previously chan-
ged (light brown)
appears only if you have entered a
name for the telephone number
10Input line, highlighted when activated
11Storing a telephone number in the pho-
ne bookEntering a telephone number

Press the number keys 1 through 0,
u and t.
The telephone number appears in 10.
Correcting input


Deleting last digit
Press r briefly.


Deleting the whole entry
Press r longer than 2 seconds.
Storing the phone number in the phone
book

Turn the right-hand rotary/push-button
v until 11 is highlighted and press to
confirm.
The main telephone menu will appear.
P82.85-9146-31
910
11

101 Telephone
Telephone operation
Deleting an entry in the phone book
1Name and telephone number of the
entry to be deleted (light brown)
2Query (light brown)
3COMAND will delete the entry from the
phone book
4The entry remains in the phone book

Turn the right-hand rotary/push-button
v to highlight “Delete” in the input
menu (
page 99) and press to con-
firm.
The query 2 appears. “Yes” is highligh-
ted.

Press the right-hand rotary/push-
button v and confirm “Yes”.
The main telephone menu appears. The
entry is deleted.
If you don't want to delete the entry:

Turn the right-hand rotary/push-button
v to highlight “No” and press to con-
firm.
The phonebook list will appear. Adding an entry to the phone book
Entering a name
1Input line
2Transferring name
P82.85-9147-31
3
4
1
2
P82.85-9148-31
1
2

102 TelephoneTelephone operation
While in the selection menu
(page 98), turn the right-hand rota-
ry/push-button v until “Add an ent-
ry...” is highlighted and press to
confirm.
An input menu will appear.

Turn the right-hand rotary/push-button
v until the desired character is high-
lighted and press to confirm.

Repeat this action.
The name will appear in the input line.
Confirm the name as described under
“Storing changed names”
(page 100).

Now change the phone number.
Correcting an input (
page 99). Entering and storing a telephone num-
ber
3Previously entered name
4Input line for phone number, entering
phone number with numeric keys 1 to
0, keyu and key t
5COMAND stores the phone number

Press the right-hand rotary/push-
button v to confirm the input.
COMAND stores the phone number
and the main telephone menu will ap-
pear.
Storing a phone number in the note-
book

While in the “Phone book” selection
menu (
page 98), turn the right-hand
rotary/push-button v to highlight
“Copy notebook...” and press to con-
firm.

Now you can enter a new name and
phone number or edit an existing entry,
and store the entry.
P82.85-9149-31
3
4
5

103 Telephone
SMS function
SMS function
With this function you can receive, read
and delete short text messages
1.
1 If available from your carrier.
1The symbol M will appear when a new
SMS message arrives, symbol “RM”
(roaming mode) that may have been
displayed before will be replaced
2Activates the SMS list

Turn the right-hand rotary/push-button
v to highlight “V” in the main tele-
phone menu and press to confirm.
Other menu fields will appear.

Turn the right-hand rotary/push-button
v to highlight 2 and press to confirm.
The SMS list will appear.
iCOMAND may have to read in SMS
messages first. The message “SMS loa-
ding...” will appear. The reading operati-
on may take up to 30 seconds.
Activating
P82.85-9150-31
1
2