navigation MERCEDES-BENZ C-Class 2003 W203 Comand Manual

125 Navigation
Destination input
Activating the city listCity list10Selected city is highlighted
11Display the previous page, if :
12Display the next page, if ;If the input menu “City/Suburb Entry” is
displayed

Press the right-hand rotary/push-
button v longer than 2 seconds.
or

Turn the right-hand rotary/push-button
v to highlight menu field 9 with and
press to confirm.
The city list will appear.
You can now do the following in the city
list:


Confirm the city/suburb that has alrea-
dy been highlighted


Select another city/suburb
Turn the right-hand rotary/push-
button v until the desired city/
suburb is highlighted.


Display the previous/next page
Turn the right-hand rotary/push-
button v to highlight one of the ar-
rows 11 or 12.

Press the right-hand rotary/push-
button v.
Confirming the city

Press the right-hand rotary/push-
button v longer than 2 seconds.
A selection menu will appear.iIf several options of a city/suburb are
available, another menu will appear
where you must make and confirm your
desired selection.

126 NavigationDestination input13City previously selected
14Selecting a street
15Selecting a city center (
page 130)

Press the right-hand rotary/push-
button v to activate the input menu
“Street”.Entering a street
“Street Entry” input menu16Input line with letters that have already
been entered
17Character set
18Zoom
19Move the insertion point one position
to the right
20Activate the street list

Turn the right-hand rotary/push-
button v to highlight the desired cha-
racter in the character set 17.
The zoom 18 enlarges the highlighted
character.

Press the right-hand rotary/push-
button v to enter the character in in-
put line 16.
COMAND supplements the new entry
with additional letters so that a saved
street name will appear.

Enter other characters until the desired
street name appears in 16.
Correcting the entry (
page 124).
iFor quicker input, COMAND will offer
available characters from the character
set 17 based on your selections and the
names of the streets stored on the navi-
gation CD.

127 Navigation
Destination input
Activating the street listStreet list21Street previously selected
22Display the previous page, if :
23Display the next page, if ;If the input menu “Street Entry” is display-
ed

Press the right-hand rotary/push-
button v longer than 2 seconds.
or

Turn the right-hand rotary/push-button
v to highlight menu field 20 with and
press to confirm.
The street list appears.
Here you can, as in the city list
(page 125), select another street or
display the previous/next page.

Press the right-hand rotary/push-
button v longer than 2 seconds.
This will confirm city/suburb and street
of the desired destination. The selec-
tion menu “Destination Entry” appears.
P82.85-9169-31
212223
iIf several options of a street are availab-
le, another menu will appear where you
must make and confirm your desired
selection.

128 NavigationDestination input“Destination Entry” selection menu1Adding an intersection
2Adding a house number
3Selecting a destination via the map
(
page 131)
4Saving a destination address in the
destination memory (
page 175)
5Confirming the destination and the cal-
culating route (
page 141)You have now selected the destination and
can define your destination address more
precisely in the following manner:


Adding an intersection


Adding a house number


Selecting it via the map (
page 131)


Selecting a city center, if you do not
want to select a street (
page 130)
or
Confirm the destination and calculate the
route (
page 141)

Press the right-hand rotary/push-
button v to confirm “OK” in the menu
“Destination Entry”.Adding an intersection
If the menu “Destination Entry” is display-
ed

Turn the right-hand rotary/push-button
v to highlight 1 and press to confirm.
A list of roads intersecting with the pre-
viously input street will appear.
Continue destination input
P82.85-9170-31
1
2
3
4
5
iIn order to do so, “House no.” must be
shown in black.

129 Navigation
Destination input

Turn the right-hand rotary/push-button
v to highlight the name of the inter-
section.

Press the right-hand rotary/push-
button v to confirm the selection.
The selection menu “Destination Entry”
will appear, indicating the intersection.

Press the right-hand rotary/push-
button v longer than 2 seconds to cal-
culate the route (
page 141).Adding a house number
Depending on the data stored on the navi-
gation CD, you can add a house number to
the destination address.
In order to do so, the menu field “House
no.” must be shown in black in the selec-
tion menu “Destination Entry”.

Turn the right-hand rotary/push-button
v to highlight 2 and press to confirm.
An input menu will appear.

Turn the right-hand rotary/push-button
v to highlight the desired numbers
one after the other and press to con-
firm.
The numbers will appear in the input
line.

Press the right-hand rotary/push-
button v longer than 2 seconds.
A list will appear.
iThe previous/next page can be display-
ed as described for the city list
(page 125).
P82.85-9172-31

130 NavigationDestination input
Turn the right-hand rotary/push-button
v to highlight the desired block and
press to confirm.
The selection menu “Destination Entry”
will appear.

Press the right-hand rotary/push-
button v longer than 2 seconds to cal-
culate the route (
page 141).Selecting a city center
You can activate the list “Center Entry” in
the main address menu (
page 123) or af-
ter selecting a city (
page 126).

Turn the right-hand rotary/push-button
v to highlight “Center” and press to
confirm.
The list “Center Entry” will appear.

Turn the right-hand rotary/push-button
v to highlight the desired entry and
press to confirm.
The selection menu “Destination Entry”
will appear.

Press the right-hand rotary/push-
button v longer than 2 seconds to cal-
culate the route (
page 141).
iThe house numbers usually appear on
the list in blocks, e.g.
1-5 odd numbers
42-50 even numbers
1-50 mixed numbers

131 Navigation
Destination input
Activating the map from the main des-
tination input menu“Destination via Map” menu
Setting the map center
1To the previous destination
2To the current vehicle location
3Activate the “City/Suburb Entry” input
menu and select the corresponding
city center after input
4Activate the coordinate destination in-
put menu
Turn the right-hand rotary/push-button
v to highlight “Destination via Map...”
(Destn via Map) in the main destination
input menu and press to confirm.
The selection menu “Destination via
Map” will appear.

Turn the right-hand rotary/push-button
v to highlight 1, 2, 3 or 4 and press to
confirm.
1 and 2 The map with the crosshairs
will appear
3 The “City/Suburb Entry”
menu will appear
(
page 124)

Enter the city in the input menu and
confirm it.
Then, the map with the crosshairs
will appear. The crosshairs are cen-
tered on the city center.
4 The coordinate destination input
menu will appear (
page 135).
Selecting a destination via the map

132 NavigationDestination inputContinue destination input via the mapMap with crosshairs5Street name or name of the symbol
(e.g. parking area) that the crosshairs
are centered on
6Crosshairs to select the destination
7Symbol for current vehicle location
8Current map scale

Turn the right-hand rotary/push-button
v to highlight “Map” and press to con-
firm.
The map with the crosshairs will ap-
pear.Moving the crosshairs

Use the number keys (refer also to the
arrows shown on the keypad) to move
the crosshairs around the map.
1 to the top left
2 up
3 to the top right
4 to the left
6 to the right
7 to the bottom left
8 down
9 to the bottom right
iDuring destination input, the map will
always appear facing north (north is on
top).
Map appearance is dependent on the
selected map scale.

133 Navigation
Destination input
Altering the map scale
9Current map scale
10Scale selector
11New map scale (filled arrow)
12Square increase section of the mapActivating the scale selector 10.

Press + or ,.
or

Press the right-hand rotary/push-
button v.
iAs you move the crosshairs towards the
edge of the screen using the number
keys, an adjacent section of the map is
activated. It may take a few seconds to
point to each new map.
Adjacent map sections overlap some-
what so that destinations at the edge of
the map can be marked as well.
iA division mark corresponds to an avai-
lable scale. You can select 13 different
scales ranging from 0.05 miles/inch to
500 miles/inch.

134 NavigationDestination inputZooming in for more detailed map
Press +.
or

Turn the right-hand rotary/push-button
v to the left.
A filled arrow for the new scale 11 and
a square 12 appear.
Press the right-hand rotary/push-button
v to calculate the map with the new sca-
le.Zooming out for less detailed map

Press ,.
or

Turn the right-hand rotary/push-button
v to the right.
The new scale will appear.

Press the right-hand rotary/push-
button v to calculate the map with the
new scale.
This will take place automatically after
6 seconds.Confirming destination and calculating
route
The crosshairs highlight the desired desti-
nation

Press the right-hand rotary/push-
button v longer than 2 seconds.

Then calculate the route (
page 141).