key MERCEDES-BENZ C-Class 2005 W203 Comand Manual

106 NavigationDestination input
Press the
Delete
soft key if
necessary.
The character last entered is deleted.
Back to the previous menu

Press the
Back
soft key.Confirming a cross street (menu)

Press E longer than 2 seconds to
confirm your entry.
or

Select the ( symbol. Push the
joystick to h, H, g or G to do
so.

Press E.
or

Press the
List
soft key.
The Select cross street list will appear.
You can now select a street.Selecting a cross street

Push the joystick to g or G to
select a city.
Available soft keys:

Press the
Details
soft key to see all
information about the street entry.

Use the
Page
V and
Page
v soft keys
to display the next or previous page.

Press the
Back
soft key to return to the
previous menu.
iFor quicker input, COMAND offers
available characters from the character
set based on your selections and the
names of the streets stored on the
navigation DVD. The character
selected appears magnified.
Greyed out characters are not available
and cannot be selected.

107 Navigation
Destination input
Confirming a cross street (list)
Press E to confirm.
The Start route guidance menu
(page 115) will appear.
Entering a city

Press the
City
soft key in the Enter
street menu (page 100).
Enter city menuThe most recently entered destination is
shown in the upper area.You can now

entering a city name or

accepting the city name shown
Available soft keys:

Map
soft key:
Brings you to the destination input
directly above the map (
page 111).

State
soft key:
Brings you to the state/province
selection (
page 101).

List
soft key:
Brings you to a list of cities with the
previously input street.

Delete
soft key:
The character last entered or the
character last accepted by the system
is deleted.

Back
soft key:
Returns you to the previous menu.
iThe currently set state is identifed by
the state code in the middle of the
screen.
If the vehicle location is in Canada, this
soft key appears as
Province
.

108 NavigationDestination input
In the Enter city menu push the joystick
to h, H, g or G to select the
characters. After each selection, press
E.

Push the joystick to F or f to
select characters diagonally.
or

Press one of the number keys 1 to
9 and 0.

Press the
Delete
soft key if
necessary.
The character last entered is deleted.
Back to the previous menu

Press the
Back
soft key.
Confirming a city (menu)

Press E longer than 2 seconds.
or

Select the ( symbol. Push the
joystick to h, H, g or G to do
so.

Press E.
iIf you enter the first character, the
Map

and
State
soft keys and a city name
already available disappear.
The status bar shows the number of
current matches.
iFor quicker input, COMAND offers
available characters from the character
set based on your selections and the
names of the cities stored on the
navigation DVD. The character
selected appears magnified.
Greyed out characters are not available
and cannot be selected.
iIf there is only one match for the
entered city name, the ( symbol is
highlighted automatically.

109 Navigation
Destination input
or
Press the
List
soft key.
The city list will appear. You can now
select a city.
Selecting a city

Push the joystick to g or G to
select a city.Available soft keys:

Press the
Details
soft key to see all
information about the city entry.

Use the
Page
V and
Page
v soft keys
to display the next or previous page.

Press the
Back
s o f t k e y t o r e t u r n t o t h e
previous menu.

Press E to confirm your selection.
The Enter street menu will appear. You
can now enter a street.Entering a parking
The Start route guidance menu will appear
after entering a destination address.
Here you can select a parking nearby.
Start route guidance menu
Press the
Parking
soft key.
The Parking lot selection map is
displayed.
or
The message
No parking
near the
destination
will appear.

110 NavigationDestination inputSelecting a parking lot
The map is displayed and shows the
destination and the available parkings lots.
One of the parking lot is spotlighted. The
name belonging to it is shown on the
status bar.
Use the
Next
or
Prev.
soft key to
select a parking lot on the map.

Press the
Details
soft key to see
more information about the parking lot.

Press E.
The Start route guidance menu will
appear (
page 115).

111 Navigation
Destination input
Selecting a destination using the map
Press c.

Push the joystick to H, h, g, G,
F, f.
or

Press the
Map
soft key, e.g. in the Start
route guidance menu (
page 115).
The map is shown in full view and
cross-hairs appear.
If soft key displays are hidden:

Press any soft key.
The soft key displays will appear.Available soft keys

POIs
soft key:
Spotlight a POI if POIs are on the map
(
page 141).

Memory
soft key:
Set a memory point and saved it in the
Last destinations memory (
page 99).

Display
soft key:
The Map view display will appear.
(
page 128).

Soft key +:
Enlarge visible map section.

Soft key ):
Reduce visible map section.
iThe system automatically places the
cross-hairs on the current destination
address.
ic was pressed:
If no soft key is selected within approx.
8 seconds, the soft key display will
disappear again.
iThe
POIs
, Memory
and
Display
soft
keys are available if the
Map
soft key
was pressed.

112 NavigationDestination input
Push the joystick to H, h, g, G
to move the cross-hairs.

Push the joystick to F or f to move
the cross-hairs diagonally.This allows you to select your destination.

Release the button.
If the system is able to assign a street
name to the selected location, it is
displayed on the status bar.

Press E.
The system uses the point at the center
of the cross-hairs as destination.
The Start route guidance menu will
appear (
page 115).
iIf you press the
Back
soft key, your
selection will be discarded. The system
then uses the data of the previous
destination.
iIf a POI is close to the center of the
cross-hairs, a selection list will appear.
You can now select between a POI and
the address destination.

113 Navigation
Destination input

Activate the Navigation main menu
(page 96).

Press the
Home
soft key.
The message No home address
available! Please enter home
address
will appear.

Press the
Change
soft key to edit a
home address.
or
The actual home address is shown.Here you can use the following
functions

changing to the map (
page 111)

setting the routing mode
(page 98)

editing home address (
page 113)

starting route guidance
(page 115)Editing home address

Press the
Change
soft key.
The Change home address menu will
appear.
You can use the following functions

selecting a destination from the
Destination memory (
page 136)

entering destination address
(page 102)
Selecting home address

118 NavigationRoute guidanceDisplay example 2:
1Current vehicle location and direction
of travel y, remaining route section
2Name of the road you are to turn onto
3Symbol for the next driving maneuver,
distance bar and distance to the next
driving maneuver
4The road you are currently driving onOn the right side of the display, the symbol
for the next driving maneuver is indicated
(here: right turn).
On the very right side next to turn symbol
is the distance bar. It indicates the
distance to the next driving maneuver
(here: 800 ft).
The status bar shows the name of the
street after the driving maneuver, if
available, here:
MAIN ST
The destination is marked with a flag $ on
the map, an intermediate destination is
marked with a flag showing the letter
S.

Press any soft key.
The soft key displays appear.iUsing the control system, the display
unit can be changed between km or
miles (see your vehicle’s Operator’s
Manual). 
When the display unit is set to
miles, the COMAND will indicate
distances in miles (mi) or feet (ft).

When the display unit is set to km,
the COMAND will indicate
distances in kilometers (km) or
meters (m).
iIf no other action is taken within
approx. 8 seconds, the soft key
displays will disappear again.

119 Navigation
Route guidance
Altering the map scale
The current map scale is indicated on the
left side of the status bar.
Press the + or ) soft key.
The map section is zoomed in or
zoomed out. A bar indicating the map
scale appears on the status bar.
Selecting map orientation
A symbol is shown on the bottom left side
of the status bar.

Heading Up
<:
Dynamic map alignment, map is
displayed facing driving direction
pointing up
or

North Up
Y:
Map is displayed facing northYou can select the map orientation
(
page 130).
Changing the map display
While route guidance is active, you can
switch between split view and full view.

Split view:
The map is shown on the left side and
information on the next maneuver on
the right.
or

Full view:
Full view of the map.

Press c.
The display changes with every push of
the button.When you reach the destination, you will
see the destination flag. Route guidance
ends.
iIf GPS display (
page 130) is active,
information on your current position is
shown on the status bar.
Arriving at destination