key MERCEDES-BENZ C-Class 2005 W203 Comand Manual

61 Satellite radio*
Subscribing

Subscribing

Press B to switch to satellite radio
operation.
The Satellite radio main menu will ap-
pear and displays the
Preview
chan-
nel. You cannnot select any other
station.

Press the
Service
soft key to display
the Service information display.
The Service information display will ap-
pear.
Service information display1Phone number of the provider,
(SIRIUS) or “Call Service Provider”
2The Electronical Serial Number (ESN)
of your satellite receiver
Contact satellite radio service provider
at the telephone number displayed in
the screen.After the connection is made:

Follow the instructions given by the
operator.
The activation process may take up to
10 minutes. If it is successful, you will
see the display with the message Acquiring Signal...
(page 62)
followed by the Satellite radio main
menu (
page 62).
Subscribing to satellite radio
iDepending on subscription status, soft
keys may or may not appear on the left
and right side of the service information
display.
iCredit card information may be re-
quired for your application.
The activation process takes up to ap-
proximately 10 minutes.
If a satellite receiver is not installed or
not properly installed:
The message
No Satellite Radio

will appear.

62 Satellite radio*Satellite radio operation

Satellite radio operationSee “Subscribing to satellite radio” for im-
portant subscription information
(page 61).

Press B to switch to satellite radio
operation.
The message will appear at start up or
when the signal is not available.After the COMAND acquires the
signal, the Satellite radio main menu will
appear. The station last tuned to will begin
to play.
Satellite radio main menu1Program category
2Station name
3Memory preset selected if available
and channel numberMuting

Press J while listening to the satel-
lite radio.
The symbol R will appear in the status
bar.

Press J again to resume listening to
the current station.
The symbol R will have disappeared.
Switching oniNo Satellite receiver:
The message
No Satellite Radio

will appear in a window.
iThe
Sound
soft key is available if
COMAND is equipped with a sound
amplifier*.
iYou can display 2 in full:
Station information (
page 66)
iMuting will also be canceled if you
switch to an audio source, e.g. normal
radio, or if you alter the volume.

63 Satellite radio*
Satellite radio operation
Satellite radio stations are split up into ca-
tegories. You can select between various
categories such as News, Sports News and
Country Music, if available. The category
list is sorted alphabetically.
Selecting a program category
Push the joystick to H or h while
the Satellite radio main menu
(page 62) is being displayed.
The previous or next program category
(alphabetical order) will appear in the
display. The station last tuned in the
new category will begin to play.
At the beginning of the category list the
category
ALL
will appear. This category
is sorted numerically (by channel
numbers) and displays all available
channels.You can use the following functions:

Automatic tuning

Automatic station scan (
page 63)

Station selection via direct channel
entry (
page 64)

Station selection from the preset menu
(page 66)
Automatic tuning

Push the joystick to gor G while
the Satellite radio main menu is being
displayed.
or

Press d or D.
The satellite radio will tune in to the nu-
merically previous or next receivable
station in the selected category.Automatic station scan
The stations in the selected category can
be scanned in numerical order for 8 se-
conds each.

In the Satellite radio main menu, press
the
Scan
soft key.
The scan function will begin.
Changing the program category
Selecting a station

64 Satellite radio*Satellite radio operationEnding scan function and playing a
station
Press the
Scan
soft key again.
The station selected will appear with
the station name.
Scan
will appear in
white lettering again.Station selection via direct channel
entry

Press *.
Input line will appear.

Enter the desired channel number with
the number keys, e.g. 24 for chan-
nel 24.
The channel you have selected will be-
gin to play. The corresponding station
name will appear, if station is available.

65 Satellite radio*
Satellite radio operation
You can use the following functions:
Saving stations manually

Selecting a station from the Satellite
preset memory (
page 66)

Selecting a station by entering the
channel number (
page 64)Saving station manually
In the Satellite radio main menu

Press one of the number keys, e.g. 2,
longer than 2 seconds.
You will hear a verification beep if the
beep tones option was activated in the
system settings (
page 162).
The satellite radio saves the current
station at the memory preset selected.
The memory preset selected will ap-
pear in the status line, e.g.
SAT2
.
On the memory list

In the Satellite radio main menu, press
the
Presets
soft key.
The SAT preset memory will appear.
Satellite preset memory
Push the joystick to gor G to se-
lect a memory preset.

Press E
longer than 2 seconds.
You will hear a verification beep if the
beep tones option was activated in the
system settings (
page 162).
The satellite radio saves the current
station at the memory preset selected.
Memory functionsiThere are 10 presets available.

66 Satellite radio*Satellite radio operationYou will see the Satellite radio main menu
automatically after 8 seconds

if you press s.Selecting a station on the memory list

In the Satellite radio main menu, press
the
Presets
soft key.
The Satellite preset memory
(
page 65) will appear.

Push the joystick to gor G to high-
light a memory preset.

Press E.
The Satellite radio main menu will then
appear automatically after 8 seconds,
indicating the memory preset number
in the status line.

In the Satellite radio main menu, press
the
Info
soft key.
The information display will appear.
You will see (if available)

the full station name

additional program information
Switching back to the Satellite radio main
menu

Press the
Back
soft key.
or

Press the
Info
soft key again.
iAn existing entry is overwritten in the
memory list when a new input is given.
If the message
Updating station
list
appears the presets may be over-
written.
Displaying information

67 Satellite radio*
Satellite radio operation
You can call the provider service center for
questions or releases, whenever you need.
Press the
Service
soft key.
The Service information display will ap-
pear.
1Phone number of the provider,
(SIRIUS) or “Call Service Provider”
2The Electronical Serial Number (ESN)
of your satellite receiver

Press the
Back
soft key to switch back
to the Satellite radio main menu.
While receiving a new channel list the mes-
sage
Updating station list
will ap-
pear.
The station last tuned will be muted until
the update is completed. You cannot ope-
rate the satellite radio.
After completion of the update, the
Satellite radio main menu will appear.
The station last tuned to will begin to play.Refer to chapter “At a glance” on how to
adjust sound settings.

Volume (
page 27)

Balance control and fader (
page 29)

Bass and treble control (
page 30)

Sound functions* (
page 30)
Displaying service information
Station list updates
Sound settings

76 Telephone*Telephone operationInitiating an emergency call
Telephone is locked
Press the
911
soft key.
The system opens an inquiry menu
prompting if you want to dial a “911”
call.
The selection marker in the inquiry
menu should be on
Yes
.

If necessary, push the joystick to
H to select
Yes
.

Press E to confirm
Yes
if you want to
place the “911” emergency call.
The emergency call will be placed.

Wait until the emergency rescue
station answers and describe the
emergency.
If you do not want to place the emergency
call:

Push the joystick to h to select
No

when the inquiry menu appears.

Press E to confirm
No
.
Telephone is ready for operation

Press a repeatedly until the
Telephone menu is displayed.

Press 9, 1 and 1 one after the
other.

Press E.
or

Press the
Send
soft key.
or

Press k.
The emergency call will be placed.

Wait until the emergency rescue
station answers and describe the
emergency.

77 Telephone*
Telephone operation
TDMA or CDMA mobile phone
Entering the unlock code
Use the number keys 1 through 0
to enter the four-digit unlock code.
Asterisks instead of digits will appear in
the input line.

Press the
OK
soft key.
If entered code is correct and the pho-
ne is registered in a network, the phone
is ready for use and the Telephone
menu will appear.GSM mobile phone
Entering the PIN code

Enter the four-digit PIN code on the
mobile phone. Refer to the mobile pho-
ne operator’s manual on how to do this.
If no SIM card is in the telephone, the
message
Please insert SIM
card
(Emergency Call 911 only pos-
sible with phone)
appears.

Insert a SIM card. Refer to the mo-
bile phone operator’s manual.
Entering codes
iYour unlock code prevents unauthori-
zed persons from using your telephone.
B e s u re t o m em o ri z e t hi s c o d e , a f o u r d i -
git number, carefully.
If you enter an incorrect code, the sys-
tem returns to the menu for entering the
unlock code.iYou must always enter the unlock code
when you switch on the telephone the
first time (if phone is in locked mode).

80 Telephone*Telephone operationThe system detects an incoming call, the
phone rings.
Incoming calls are indicated in a window in
any system (e.g. radio).
The window shows:
the caller’s number if it is transmitted
or

the caller’s name if her or his name and
number are saved in the phone book or

Unknown
.Accepting a call

Press k.
or

Press E to confirm
accept
.
The display will change to the
call menu (
page 85). In the status
bar, the off-hook symbol will appear.
An active audio source will be muted.
You talk over the hands-free set.
Rejecting a call

Press K.
or

Push the joystick to H to highlight reject
and than press E.Setting the volume for hands-free ope-
ration
Raising the volume

Turn the rotary control on the e but-
ton to the right.
Lowering the volume

Turn the rotary control on the e but-
ton to the left.
Ending a call

Press K.
or

Press the
End
soft key.
Incoming call