system MERCEDES-BENZ C-Class 2008 W204 Comand Manual

15 At a glance
COMAND control system
The currently selected function and the
associated menus are shown on the
COMAND display. The COMAND display is
divided into several areas.
1Status line
2Main functions
3Main area
4SubmenusThe status line 1 displays the time and
the current telephone status.
You can change the main function using
the menu bar 2. The selection is made us-
ing the COMAND controller (
page 20).
In this example, the Audio main function is
set to the radio mode and the main area 3
is active.
i The arrangement of the menus can vary, de-
pending on the equipment. The menus for the full
equipment version are shown in this guide.
Menu overview
Having selected a main function, you will
see the submenu at the bottom edge 4 of
the COMAND display.
Additional menus are available at the top
of the COMAND display 2 for the naviga-
tion, audio and telephone main functions
(
page 16).
COMAND display

16 At a glance
COMAND control system
Main Function menu items
The table below illustrates the structure of the main functions and the associated menu items.
NaviAudioPhoneVideoSystem
Map DisplayFM / AM RadioPhone(Resumes playback if
DVD video is loaded in
changer)(Main function display
appears)
ModeSatRadio*Address Book
Block AreaDisc
Information On MapMemory Card (MP3 mode)
D Highway InformationMusic Register
Aux

17 At a glance
COMAND control system
Tilting and folding COMAND display
! Do not place any objects in front of or be-
hind the COMAND display and/or secure any
objects to the COMAND display itself. This may
obstruct the movement when the display is being
folded in/out.
You can tilt the COMAND display vertically
or fold it in behind the cover. The buttons
are located centrally under the COMAND
display.
1Tilting display
2Folding in displayTilting display
Press 1 once or twice.
The display tilts downwards.
Back into standard position: Press
1 again.
Folding in display
Press 2.
The display folds in behind the
cover. The main function/operating
mode currently selected remains ac-
tive.
Folding out display
Press button on the display cover.
The display folds upwards.
Cleaning instructions
! Avoid touching the COMAND display at all
times. The display has a very sensitive high-gloss
surface, there is a risk of it being scratched. If
you do have to clean it, however, then use a soft,
lint-free cloth.
With the COMAND control unit you can

switch the COMAND on/off

adjust the volume

select the main functions/operating
modes directly

enter phone numbers and accept, re-
ject, initiate and end phone calls

load and eject CDs/DVDs or a PCMCIA
memory card
COMAND control unit

18 At a glance
COMAND control system

19 At a glance
COMAND control system
FunctionPage
1Switching to radio mode
Switching wavebands
Switching to SatRadio*
mode40
42
45
2Switching to CD audio,
DVD audio or MP3 mode
Switching to DVD video
mode
60
77
3Disc slot
Loading CDs/DVDs
Ejecting CDs/DVDs
Updating the map soft-
ware
54
57
112
4Load/Eject button
5Clear button for functions
Entering a phone number
Deleting digit or entire
entry
101
95
6Tuning to a station via the
station memory
42, 42
6Storing stations manually
Selecting DVD changer
compartments
Entering a phone number
Sending DTMF tones43, 43
101
102
7Tuning to a station via sta-
tion search
Fast forward
Selecting next track
42
63, 78
63
8Switching COMAND on/
off
35
9Setting the volume35
aSlot for PCMCIA memory
card
bEject button for
PCMCIA memory card
58
cTuning to a station via sta-
tion search
Fast reverse
Selecting previous track
42
63, 78
63
FunctionPage
dAnswering calls
Initiating calls
Redial101
94,101
101
eRejecting calls
Ending an active call101
103
fOpening System menu164
gMute
Switching hands-free mi-
crophone on/off
Switching traffic and navi-
gation announcements off35
102
35
hSwitching to phone mode
92
jSwitching to navigation
mode
Displaying menu system
118
119
FunctionPage

20 At a glance
COMAND control system
1COMAND controller
The menu items are selected on the
COMAND display using the COMAND con-
troller. An on-screen selector bar is moved.
In this way, you can open menus or lists,
move within menus or lists and exit menus
or lists.
Operating the COMAND controller
The COMAND controller features the fol-
lowing options:

brief press or press and hold n

rotate to the right or left ymz

slide to left, right omp
or

slide up, down qmr
or

slide diagonally wmx
i In this operating guide an operation step is
described as in the example below.
Select “Station List”.
is short for
Rotate ymz or slide qmr the CO-
MAND controller.
This enables you to move the selector
bar in the menu to the “Station List”
menu item.
Press the COMAND controller n.
This confirms your selection. The sta-
tion list appears.
COMAND controller

21 At a glance
COMAND control system
SymbolHow to use the COMAND controllerFunction
nPress briefly.
Select menu item.

Exit full-screen image with Navi.
Press and hold until the selected
action has been carried out.
Accept destination for navigation.
ymzRotate.
Move through vertical or horizontal menus.

Move through text.

Program settings.
qmr Slide.
Move through vertical menus.

Exit horizontal menus.
Slide and hold.
Moves through a navigation map.
ompSlide.
Move through horizontal menus.

Exit vertical menus.
Slide and hold.
Fast forward or reverse for audio CD or audio DVD playback.

Move through a navigation map.
wmxSlide and hold.
Move through a navigation map.

22 At a glance
COMAND control system
1Back button í
To exit menu: Briefly press the í
button1.
COMAND switches to the next menu
level up within the operating mode cur-
rently in use.
i You can also exit a menu by sliding the
COMAND controller
omp or qmr
(page 31).
To switch to the main display from
submenu displays: Press and hold the
í button1.
COMAND switches to the main display
for the operating mode currently in
use.1Clear button î
To delete an individual character:
Briefly press the î button1.
To delete an entire entry: Press and
hold the î button1.
Back buttonClear button

27 At a glance
Multifunction steering wheel
Navigation status indicators in the
multi-function display
When route guidance is activated, the fol-
lowing messages may appear:

< : you have reached the destination.

“Dest. area reached”: you are ap-
proaching the destination. This mes-
sage appears, for example, with
relatively large special destinations.

“New route”: the system is calculating
a new route, for example because you
have deviated from the previous route.
Route guidance is subsequently re-
sumed.

“Calculating route”: a route is being cal-
culated, after which route guidance will
start.

“Off map”: the vehicle is outside the
range of the digital map. The vehicle is
in an off-map position.

“Off mapped road”: the vehicle is on a
road which is not in the digital map, or
is away from the road, for example in a
car park.

“No route”: no route to the selected
destination could be calculated.
Use the functions in the Audio menu to op-
erate the audio equipment. If no audio
equipment is switched on, the multi-func-
tion display shows the message Audio Off.
To adjust the volume:
press the
æ or ç button.
Selecting a radio station/channel
Switch on COMAND and select “FM/
AM Radio“ (
page 40) or “SatRadio“
(
page 47).
Select the Audio menu.
1Wave band
2Channel name or number
To select the next or previous pre-
set channel: briefly press % or
$.
or
To select the next or previous chan-
nel: press and hold % or $.
i You can only change the wave band and
save new stations/channels using COMAND.
Lane recommen-
dation displayMeaning
Lane without lower
limitUninterrupted lane
Lane with lower limitNew lane during a
maneuver
Line with arrowLane recommend-
ed for the maneu-
ver
Audio menu

29 At a glance
Multifunction steering wheel
You can use the functions in the “Tel”
menu to operate your mobile phone.
Switch on COMAND;
Select the “Tel” menu.
Mobile phone status

If the mobile phone is switched on and
authorized, the message “Phone Rea-
dy” appears in the multifunction dis-
play.

If the mobile phone is not authorized or
authorized but switched off, the mes-
sage “Ready for Bluetooth Telephony…”
appears in the multifunction display.

If the mobile phone is authorized but
locked it is not possible to dial and the
message “No Service” appears in the
multifunction display.
Accepting a call
If someone calls you while you are in the
Tel menu, the following message appears
in the multi-function display:
Press s to answer a call.
You can also take a call if you have not se-
lected the “Tel” menu.
Rejecting or ending a call
Press t
You can also not take or end a call if you
have not selected the “Tel” menu.
Tel menu
G Warning
Some jurisdictions prohibit the driver from
using a cellular telephone while driving.
Whether or not prohibited by law, for safety
reasons, the driver should not use the cellu-
lar telephone while the vehicle is in motion.
Stop the vehicle in a safe location before
placing or answering a call.
If you nonetheless choose to use the mobile
phone while driving, please use the hands-
free feature and be sure to pay attention to
the traffic situation at all times. Use the mo-
bile phone only when road, weather and traf-
fic conditions permit. Otherwise, you may
not be able to observe traffic conditions and
could endanger yourself and others.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
G Warning
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle’s electronic system, pos-
sibly resulting in an accident and/or
personal injury.