display MERCEDES-BENZ C CLASS 2019 Repair Manual

Toscroll inthe menu bar:swipe left orright on left-handTouch Control2.
Tocall up a menu or confirm a selection:pressthe left-handTouch Control2.
Toscrollthrough displaysor lists onthemenu:swipe upwards or downwards on left-handTouch Control2.
Tocall up a submenu or confirm a selec‐tion:press left-handTouch Control2.
Toexit a submenu:press back button onthe left1.
Settingthe design
On-board computer:
Designs
This function is onlyavailableforvehicleswith aWidescreen Cockpit.
Thefollowing designs can be selected:
RClassic
RSport
RProgressive
Toselect a design:swipe upwards or down‐wards onthe left-handTouch Control.
Pressthe left-handTouch Control.The Instrument Display is shown inthe selec‐ted design.
Settingthe additionalvaluerange
Example: G-meter
1Additionalvaluerange
2Index points
Toselect display content:swipetotheright onthe left-handTouch Control.
Swipe upwards or downwards onthe left-handTouch Controltoselect display content.When display content is selected, additionalvaluerange1will briefly be highlighted.
Index points2will displaythe selected listitem.
Instrument Display and on-board computer229

Thefollowing display content can be selected intheClassicandSportdesigns:
RTachometer
RNavigation
RECO display
RConsumption
RG-Meter
Thefollowing content can be selected inthePro-gressivedesign:
RDate
RNavigation
RECO display
RConsumption
RG-Meter
Overview of displaysonthe multifunctiondisplay
1Outsidetemperature
2Time
3Display section
4Transmission position
5Drive program
Further displaysonthe multifunction display:

Vehicles withTraffic Sign Assist:Detectedinstructions and traffic signs (page217).
Adjusting the instrument lighting
Turnbrightness control1up or down.The lighting ofthe Instrument Display and inthe control elements ofthevehicle interior isadjusted.
Menus and submenus
Functions onthe service menu ofthe on-board computer
On-board computer:
Service
Toselectthe function:swipe upwards ordownwards onthe left-handTouch Control.
Pressthe left-handTouch Control.
Functions ontheServicemenu:
RMessage memory (page 433)
RTires:
-Restartthe tire pressure losswarningsystem (page 398)
-Checkthe tire pressure withthe tire pres‐sure monitor (page 396)
-Restartthe tire pressure monitor(page 397)
RASSYST PLUS: calls upthe service due date(page 351)
RVehicles with aWidescreen Cockpit:Cool-ant: coolanttemperature display
REngine Oil Level: engine oil level
Calling upthe assistancegraphic
On-board computer:
Assistance
Thefollowing displaysareavailable onthe assis‐tance graphic menu:
RAssistancegraphic
RAttention level (page215)
Toswitch betweenthe displays:swipeupwards or downwards onthe left-handTouch Control.
Instrument Display and on-board computer231

Status displaysonthe assistance graphic:
R

Example: trip computer
1Total distance
2Driving time
3Average speed
4Average fuel consumption
Resettingvalues onthe trip menu ofthe on-board computer
On-board computer:
Trip
The spelling onthe main menu displayedmay differ.Therefore, observethe menu
overviewforthe Instrument Display(page 228).
You canresetthevalues ofthefollowing func‐tions:
RTrip distance
RTrip computerFrom StartandFrom Reset
RECO display(page152)
Toselectthe functiontobereset:swipeupwards or downwards onthe left-handTouch Control.
Pressthe left-handTouch Control.
SelectYes.
Pressthe left-handTouch Control.
Ifyou press and holdthe left-handTouch Con‐trol,thevalues ofthe function will beresetimmediately.
Calling up navigation instructions onthe on-board computer
On-board computer:
Navigation
Example: nochange of direction announced
1Distancetothe nextchange of direction
2Distancetothe next destination
3Estimated arrival time at next destination
4Currentroad
Instrument Display and on-board computer233

Example:change of direction announced
1Distancetothechange of direction
2Roadtowhichthechange of direction leads
3Change-of-direction symbol
4Recommended lane (white)
5Possible lane
6Lane notrecommended (darkgray)
Further possible displaysontheNavigationmenu:
RDirection of Travel: display of direction oftravel androad currently being traveled on.
RNew Route...orCalculating Route...: a newroute is being calculated.
RRoad Not Mapped:theroad is unknown, e.g.for newly builtroads.
RNo Route: noroute could be calculatedtothe selected destination.
ROff Map:the mapforthe current location isnotavailable.
RArea of Destination Reached:you havereachedthe area ofthe destination.
RK:you havereachedthe destination or anintermediate destination.
Toexitthe menu:pressthe back button onthe left.Vehicles withthe COMAND multimedia sys‐tem:You can alsostart navigationtoone oftherecent destinations ontheNavigationmenu:
Pressthe left-handTouch Control.
Toselect a destination:swipe upwards ordownwards onthe left-handTouch Control.
Pressthe left-handTouch Control.Route guidance isstarted.
Ifroute guidance has already been activated,arequest will appear asking whetheryouwishtoendthe currentroute guidance.
SelectYes.
Pressthe left-handTouch Control.Route guidance isstarted.
234Instrument Display and on-board computer

Selectingradiostations usingthe on-boardcomputer
On-board computer:
Radio
1Memory preset
2Channel name
3Name of track
4Name of artist
Whenyou select astation fromthe memory pre‐sets,the preset will appear nexttothestationname. Whenyou select a savedstation inthefrequencyrange, an asterisk will appear nexttothestation name.
Toselect aradiostation:swipe upwards ordownwards onthe left-handTouch Control.
Selectingthe frequencyrange or memorypreset
Pressthe left-handTouch Control.
Toselectthe frequencyrange/stationpreset:swipe upwards or downwards ontheleft-handTouch Control.
Pressthe left-handTouch Control.
Media playbackusingthe on-boardcomputer
On-board computer:
Media
1Media source
2Track number and current track
3Name of artist
4Name of album
Tochange trackson an active mediasource:swipe upwards or downwards ontheleft-handTouch Control.
Instrument Display and on-board computer235

Changing a media source
Pressthe left-handTouch Control.
Toselect a media source:swipe upwardsor downwards onthe left-handTouch Con‐trol.
Pressthe left-handTouch Control.
Dialingtelephone numbers usingthe on-board computer
\nWARNINGRisk of distraction from infor‐mation systems and communicationsequipment
Ifyou operate information and communica‐tion equipment integrated inthevehiclewhen driving,you will be distracted fromthetraffic situation. This could also causeyoutolose control ofthevehicle.
Only operatethis equipment whenthetraffic situation permits.
Ifyou cannot be sure ofthis,stopthevehicle whilst paying attentiontoroad
and traffic conditions and operatetheequipment withthevehiclestationary.
Whentelephoning,you must observethe legalrequirementsforthe countryin whichyou arecurrently driving.
Requirements:RThe mobile phone is connectedtothe multi‐media system.
On-board computer:
Phone
Vehicles withthe COMAND multimedia sys‐tem:The mostrecenttelephone calls (dialed,received and missed calls) are displayed onthePhonemenu.
Toselect an entry:swipe upwards or down‐wards onthe left-handTouch Control.
Pressthe left-handTouch Control.Ifthere is only onetelephone numbersavedtoan entry:thetelephone numberwill be selected.
Ifthere are multipletelephone numberssavedtoan entry:swipe upwards or down‐
wards onthe left-handtouch controltoselectthe desiredtelephone number.
Pressthe left-handTouch Control.Thetelephone number will be dialed.
Thefollowing displaysmay appear instead ofthetelephone numbers dialed:
RPlease Wait...:the application isstarting. If a
Bluetooth®connectiontothe mobile phoneis not established,the menufor authorizingand connecting a mobile phone will be dis‐played onthe multimedia system(page 304).
RUpdating data...:the call list is being upda‐ted.
RImporting Contacts...: contacts are beingimported fromthe mobile phone or astoragemedium.
Accepting/rejecting a callVehicles with Head-up Display:whenyoureceivea call,theIncoming Callmessage willappear onthe Head-up Display.
236Instrument Display and on-board computer

Swipe upwards or downwards onthe left-handTouch Control and selecta(Accept)orv(Reject).
Pressthe left-handTouch Control.
You may accept/rejectthe call using buttonaorvonthesteering wheel.
Adjusting the Head-up Displaysettings onthe on-boardcomputer
On-board computer:
HUD
Thefollowing Head-up Display settings can beadjusted:
RPosition
RBrightness
RDisplay Content
Toselect a setting:swipe upwards or down‐wards onthe left-handTouch Control.
Pressthe left-handTouch Control.
Toadjust avalue:swipe upwards or down‐wards onthe left-handTouch Control.
Pressthe left-handTouch Control.
1Setting currently selected
2Digital speedometer
3Traffic Sign Assist
4Navigation displays
Head-up Display
Function ofthe Head-up Display
Mercedes-AMGvehicles:be suretoobservethe information inthe Supplement. Otherwise,you may notrecognize dangers.
The Head-up Display projects intothe driver'sfield of vision:
RInformation fromthe navigation system
RInformation fromthe driver assistance sys‐tems
RSomewarning messages
Display elements
1Navigation messages
2Current speed
3Detected instructions and traffic signs
4Set speed inthe driver assistance system(e.g. cruise control)
Instrument Display and on-board computer237

Whenyoureceivea call,theaIncoming Callmessage will appear onthe Head-up Display.
In audio mode,thestation name or track will beshowntemporarily whenthe audio source isbeing actively operated.
System limitations
The visibility is influencedbythefollowing condi‐tions:
RSeat position
RThe positioning ofthe display image
RLight conditions
RWetroads
RObjects onthe display cover
RPolarization in sunglasses
Inextreme sunlight, sections ofthe displaymay appearwashed out.You can correctthisbyswitchingthe Head-up Display off and onagain.
Switchingthe Head-up Display on/off
Press button1.
238Instrument Display and on-board computer