length MERCEDES-BENZ C CLASS 2019 Owners Manual

Status ofthe front passenger front airbag
Function ofthe automatic front passengerfront airbag shutoffThe automatic front passenger front airbag shut‐off is abletodetect whetherthe front passengerseat is occupiedbya person or achildrestraintsystem. The front passenger front airbag is ena‐bled or disabled accordingly.
When installing achildrestraint system onthefront passenger seat, always make sure ofthefollowing:
REnsurethatthechildrestraint system is posi‐tioned correctly (page48).
RAlways observethechildrestraint systemmanufacturer's installation instructions.
RNever place objects, e.g. cushions, under orbehindthechildrestraint system.
RFullyretractthe seat cushion length adjust‐ment.
RThe entire base ofthechildrestraint systemmust alwaysrestonthe seat cushion ofthefront passenger seat.
RThe backrest oftheforward-facingchildrestraint system must lie asflat as possibleagainstthe backrest ofthe front passengerseat.
RThechildrestraint system must nottouchtheroof or be put understrainbythe headrestraints.Adjustthe seat backrest inclina‐tion andthe headrestraint setting accord‐ingly.
\nWARNINGRisk of injuryor death duetoobjects betweenthe sitting surface andthechildrestraint system
Objects betweenthe sitting surface andthechildrestraint system could affectthe func‐tion ofthe automatic front passenger airbagshutoff.
This couldresult inthe front passenger air‐bag not functioning as intended during anaccident.
Do not place any objects betweenthesitting surface andthechildrestraintsystem.
The entire base ofthechildrestraintsystem must alwaysrestonthe sittingsurface ofthe front passenger seat.
The backrest oftheforward-facingchildrestraint system must, asfar as possi‐ble, beresting onthe seat backrest ofthe front passenger seat.
Always comply withthechildrestraintsystem manufacturer's installationinstructions.
A person onthe front passenger seat mustobservethefollowing information:
RFasten seat belts correctly (page36).
RSit in an almost upright seat position withtheir back againstthe seat backrest.
RSit withtheirfeetresting onthefloor, if pos‐sible.
The front passenger front airbag mayotherwisebe disabledbymistake,forexample inthefol‐lowing situations:
RThe front passenger transferstheirweightbysupportingthemselves on avehicle armrest.
Occupant safety43

\nWARNINGRisk of injuryor death duetoincorrect positioning oftheforward-facingchildrestraint system
Ifyou secure achild in aforward-facingchildrestraint system onthe front passenger seatandyou positionthe front passenger seattooclosetothe cockpit, intheevent of an acci‐dent,thechild could:
RCome into contact with thevehicle inte‐rior ifthePASSENGER AIRBAG OFF indi‐cator lamp is lit,forexample.
RBestruckbythe air bag ifthePASSENGER AIRBAG OFF indicator lampis off.
Always movethe front passenger seatasfar back as possible and fullyretractthe seat cushion length adjustment.Always make surethatthe shoulder beltstrap is correctlyrouted fromthe seatbelt outlet onthevehicletothe shoul‐der belt guide onthechildrestraint sys‐tem. The shoulder beltstrap must beroutedforwards and downwards fromthevehicle belt outlet. If necessary,
adjustthe seat belt outlet andthe frontpassenger seat accordingly.
Always observethechildrestraint sys‐tem manufacturer's installation instruc‐tions.
When installing achildrestraint system onthefront passenger seat, observethevehicle-spe‐cific information (page 59).
If a person is sitting onthe front passengerseat:PASSENGER AIRBAG OFF may be lit con‐tinuously or be off, depending onthe person'sstature.
A person onthe front passenger seat mustalways observethefollowing information:
RIfthe front passenger seat is occupiedbyanadult or a person with astature correspond‐ingtothat of an adult,thePASSENGER AIRBAG OFF indicator lamp must be off. Thisindicatesthatthe front passenger front air‐bag is enabled.
IfthePASSENGER AIRBAG OFF indicatorlamp is lit continuously,an adult or person
with a build correspondingtothat of an adultshould not usethe front passenger seat.
Instead,theyshould use arear seat.
RIfthe front passenger seat is occupiedby aperson of smallerstature (e.g. ateenager orsmall adult),thePASSENGER AIRBAG OFFindicator lamp either lights up continuouslyorremains off, depending ontheresult oftheclassification.
-IfthePASSENGER AIRBAG OFF indicatorlamp is off: movethe front passengerseat asfar back as possible, orthe per‐son of smallerstature should use arearseat.
-IfthePASSENGER AIRBAG OFF indicatorlamp is lit continuously:the person ofsmallerstature should not usethe frontpassenger seat.
46Occupant safety

Securingthechildrestraint system withtheseat belt onthe front passenger seat
When installing a belt-securedchildrestraintsystem onthe front passenger seat, alwaysobservethefollowing:
sObservethechildrestraint system manufac‐turer's installation and operating instruc‐tions.
sWhen using aforward-facingchildrestraintsystem in Group I:removethe headrestraint fromtherespective seat, if possi‐ble.
Whenyouremovethechildrestraint sys‐tem, installthe headrestraint again immedi‐ately and adjust allthe headrestraints cor‐rectly.
sThe backrestoftheforward-facingchildrestraint system must lie asflat as possibleagainstthe backrest ofthe front passengerseat.
sFor certainchildrestraint systems inweightgroup II or III,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not be putunderstrain betweentheroof andthe seatcushion and/or be installedfacingthewrong direction.Adjustthe seat backrestinclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
sNever place objects under or behindthechildrestraint system, e.g. cushions.
The seat belt onthe front passenger side isequipped with a special seatbeltretractor.
When activated,the special seatbeltretractorensuresthatthe seat belt does not slacken oncethechildrestraint system is secured(page54).
Setthe front passenger seat asfar back aspossible and movethe seat intothe highestposition.
Fullyretractthe seat cushion length adjust‐ment.
Adjustthe seat cushion inclination sothatthe front edge ofthe seat cushion is inthe
highest position andtherear edge oftheseat cushion is inthe lowestposition.
Setthe seat backresttoan almostverticalposition.
Installthechildrestraint system.The entire base ofthechildrestraint systemmust alwaysrestonthe seat cushion ofthefront passenger seat.
Always make surethatthe shoulder beltstrap is correctlyrouted fromthe seat beltoutlet ofthevehicletothe shoulder beltguide onthechildrestraint system.The shoulder beltstrap must beroutedfor‐wards and downwards fromthe seat belt out‐let.
If necessary,adjustthe seat belt outlet andthe front passenger seat accordingly.
60Occupant safety

10ft(3 m)awayfromthevehicle insuch situations.
When makingthe kicking movement, make surethatyourfeetarefirmly onthe ground,other‐wiseyou could loseyour balance, e.g. on ice.
Requirements
RThe SmartKeyis behindthevehicle.
RStand at least12in (30 cm)awayfromthevehicle while performingthe kicking move‐ment.
RDo not come into contact withthe bumperwhile makingthe kicking movement.
RDo not carryoutthe kicking movementtooslowly.
RThe kicking movement must betowardsthevehicle and back again.
1Detectionrange ofthe sensors
If several consecutive kicking movements arenot successful,waitten seconds.
System limitations
The system may be impaired or may not functionif:
RSnow or dirt, e.g. fromroad salt, coversthesensor area.
RThe kicking movement is made using a pros‐thetic leg.
The trunk lid could be opened or closed uninten‐tionally, inthefollowing situations:
RA person's arms or legs are moving inthesensor detectionrange, e.g. when polishingthevehicle or picking up objects.
RObjects are moved or placed behindthevehi‐cle, e.g.tensioningstraps or luggage.
RClampingstraps,tarps orother coverings arepulledoverthe bumper.
RA protective mat with a lengthreachingoverthe trunk sill down intothe detectionrangeofthe sensors is used.
RThe protective mat is not secured correctly.
RWorkis being undertaken onthe trailer hitch,on trailers orrear bicycleracks.
Deactivate KEYLESS-GO (page 65) or donot carrythe SmartKeyaboutyour person insuch situations.
Switching separate trunk locking on or off
Ifyou centrally unlockthevehicle while separatelocking is activated,the trunk willremain locked.
Opening and closing77

Toadjustthe seat cushion length:lift lever1and slidethe front section ofthe seatcushionforwards or backwards.
Adjusting the front seat electrically
1Headrestraint height
2Seat backrest inclination
3Seat height
4Seat cushion length
5Seat cushion inclination
6Seatfore-and-aft position
Savethe settings withthe memory function(page102).
Adjusting the 4-waylumbar support
1Toraise
2Tosoften
3Tolower
4Toharden
Seats andstowing95

Electric parking brake
Electric parking brake function (applyingautomatically)
\nWARNINGRisk of accident and injuryduetochildren and animals left unatten‐ded inthevehicle
Ifyou leavechildren and animals unattendedinthevehicle,theymay be abletosetthevehicle in motion,forexampleby:
RReleasingthe parking brake.
RShiftingthe automatic transmission outof park position].
RStartingthe engine.
In addition,theymay operatevehicle equip‐ment and become trapped.
Never leavechildren and animals unat‐tended inthevehicle.
When leavingthevehicle, alwaystakethe SmartKeywithyou and lockthevehicle.
The electric parking brake is applied ifthe trans‐mission is in position]and one ofthefollow‐ing conditions is fulfilled:
RThe engine is switched off.
RThe seat belttongue is not inserted intheseat belt buckle ofthe driver's seat andthedriver's door is opened.
Toprevent application: pullthe handle oftheelectric parking brake.
Inthefollowing situations,the electric parkingbrake is also applied:
RActive Distance AssistDISTRONIC is bringingthevehicletoastandstill.
RThe HOLD function iskeepingthevehiclesta‐tionary.
RActiveParking Assist iskeepingthevehiclestationary.
This isthe case if one ofthefollowing conditionsis also fulfilled:
RThe engine is switched off.
RThe seat belttongue is not inserted intheseat belt buckle ofthe driver's seat andthedriver's door is opened.
RThere is a system malfunction.
RThe power supply is insufficient.
RThevehicle isstationaryfor a lengthyperiod.
Whenthe electric parking brake is applied,theredI(USA) or$(Canada) indicator lampappears inthe instrument cluster.
The electric parking brake is not automaticallyapplied ifthe engine is switched offbythe ECOstart/stop function.
Electric parking brake function (releasingautomatically)
The electric parking brake isreleased whenthefollowing conditions are fulfilled:
RThe engine isrunning.
RThe seat belttongue is inserted intothe seatbelt buckle ofthe driver's seat.
RThe transmission is in position[or^andyou depressthe accelerator pedal oryou
16 8Driving and parking

Vehicles withActiveParking Assist and a 360°Camera
IfActiveParking Assist is deactivated and anobstacle is detected inthe path ofthevehicle, apop-up windowforParking AssistPARKTRONIC1appears inthe multimedia system at speedsbelow 6mph (10 km/h).
System limitations
Parking AssistPARKTRONIC does not necessa‐rilytakeinto accountthefollowing obstacles:
RObstacles below the detectionrange, e.g.persons, animals or objects.
RObstacles abovethe detectionrange, e.g.overhanging loads,overhangs or loadingramps of trucks.
The sensors must be free of dirt, ice and slush.Otherwise,theymay not function correctly.Cleanthe sensorsregularly,taking care nottoscratch or damagethem.
Function ofthe passive side impact protec‐tionPassive side impact protection is an additionalParking AssistPARKTRONIC function whichwarnsthe driver about obstacles atthe side ofthevehicle. Awarning is issued when obstaclesare detected betweenthe front andrear detec‐tionrange. In orderfor an object onthe sidetobe detected,the sensors inthe front andrearbumper mustfirst detectthe object whileyouare driving past it.
Duringthe parking procedure or maneuvering,objects are detected asthevehicle drives past.Ifyousteer inthe direction of a detected obsta‐cle andthere is arisk of a lateral collision, awarning is issued. The segments onthe sides
light upyellow orred, depending onthe distancetothe obstacle.
Segment color depending on distance
ColorLateral distance incm
YellowApprox. 30 - 60
RedApprox. < 30
In orderfor lateral front orrear segmentstobedisplayed,thevehicle mustfirst travel a distanceof at least half ofthevehicle length. Oncethevehicle has traveledthe length ofthevehicle, allofthe lateral front andrear segments can be dis‐played.
Driving and parking201

takeregular breaks in good timethat allowforadequaterecuperation.
You canchoose between two settings.
RStandard:normal system sensitivity.
RSensitive:higher system sensitivity. Thedriver iswarned earlier andthe attentionlevel detectedbyATTENTION ASSIST is adap‐ted accordingly.
If drowsiness or increasing lapses in concentra‐tion are detected,theATTENTION ASSIST: Takea Break!warning appears inthe instrument dis‐play.You can acknowledgethe message andtake a break where necessary.Ifyou do nottakea break andATTENTION ASSIST continuestodetect increasing lapses in concentration,youwill bewarned again after a minimum of15minutes.
You can havethefollowingstatus informationforATTENTION ASSIST displayed inthe assistancemenu ofthe on-board computer:
RThe length ofthe journey sincethe lastbreak.
RThe attention level determinedbyATTENTIONASSIST.
IfATTENTION ASSIST is unabletocalculatetheattention level and cannot issue awarning,theSystem Suspendedmessageappears.
If awarning is given inthe instrument display,the multimedia system offerstosearchfor arestarea.You can select arestarea andstart naviga‐
tiontothisrestarea. This function can be activa‐ted and deactivated inthe multimedia system.
IfATTENTION ASSIST is deactivated,the

fied onthevehicle identification plate ontheB‑pillar onthe driver's side.
Maximumweight ofthe ladenvehicle:themaximumweight isthe sum ofthe curbweightofthevehicle,theweight ofthe accessories,themaximum load andtheweight of optional equip‐ment installed atthefactory.
Kilopascal (kPa):metric unitfor tire pressure.6.9 kPa correspondsto1 psi. Another unitfortire pressureis bar.100 kilopascal (kPa) equals1 bar.
Load index:in additiontothe load-bearingindex,the load index may also be imprinted onthe sidewall ofthe tire. This specifiesthe load-bearing capacity ofthe tire more precisely.
Curbweight:theweight of avehicle withstand‐ard equipment includingthe maximum capacityof fuel, oil and coolant. It also includesthe airconditioning system and optional equipment ifthese are installed onthevehicle, but does notinclude passengers or luggage.
Maximum tire load:the maximum tire load isthe maximum permissibleweight in kilograms orlbsfor whicha tire is approved.
Maximum permissible tire pressure:maxi‐mum permissible tire pressurefor one tire.
Maximum load on one tire:maximum load onone tire. This is calculatedbydividingthe maxi‐mum axle load of one axlebytwo.
PSI (pounds per square inch):standard unit ofmeasurementfor tire pressure.
Aspectratio:ratio between tire height and tirewidth in percent.
Tirepressure:pressure insidethe tire applyingan outwardforcetoeverysquare inch ofthe tire.The tire pressure is specified in pounds persquare inch (psi), in kilopascals (kPa) or in bar.The tire pressure should only be corrected whenthe tires are cold.
Cold tire pressure:the tires are cold whenthevehicle has been parkedfor at least3 hourswithout direct sunlight onthe tires orthevehiclehas been drivenfor lessthan 1 mile (1.6 km).
Tirecontact surface:the part ofthe tirethatcomes into contact with theroad.
Tirebead:the purpose ofthe tire bead istoensurethatthe tire sits securely onthe wheel
rim. There are several wire cores inthe tire beadtopreventthe tire fromchanging length onthewheelrim.
Sidewall:the part ofthe tire betweenthe treadandthe tire bead.
Weight of optional equipment:the combinedweight ofthe optional equipmentweighing morethanthereplacedstandard parts and morethan5 lbs (2.3kg).This optional equipment, such ashigh-performance brakes, level control system, aroof luggagerackor high-performance batteries,is not included inthe curbweight andtheweightofthe accessories.
TIN (Tire IdentificationNumber):a uniqueidentification number which can be usedby atire manufacturertoidentify tires,forexample,in a productrecall, andthus identifythe pur‐chasers. The TIN is made up ofthe manufactur‐er's identity code, tire size, tire type code andthe manufacturing date.
Load-bearing index:the load-bearing index is acodethat containsthe maximum load-bearingcapacity of a tire.
41 0Wheels and tires

Height when opened
Model11Heightwhenopened
C 30069.6 in(1768 mm)
C 300 4MATIC69.8 in(1774 mm)
Vehicle dimensions
All models
Vehicle length184.5 in(4686 mm)
Vehicle width including out‐side mirrors79.5 in(2020 mm)
Wheelbase111.8 in(2840 mm)
ModelVehicleheight
C 30057.0 in(1447 mm)
C 300 4MATIC61.1in(1552 mm)
ModelTurningradius
C 30036.8ft(11.22 m)
C 300 4MATIC37.6ft(11.45 m)
Weights and loads
Please notethatforthe specifiedvehicle data:
Ritems of optional equipment increasethecurbweight andreducethe payload.
Roof load
All models
Maximumroof load165 lb (75kg)
432Technical data