lock MERCEDES-BENZ C CLASS 2019 Owners Manual

1Operatesthe memory function→102
2Adjuststhe seats electrically→95
3Switchesthe seat heater on/off→98
4Switchesthe seatventilation on/off→99
5Operatesthe outside mirrors→13 4
6Opens/closesthe trunk lid→73
7bOpens/closestheright side window→80
8bOpens/closesthe left side window→80
9bOpens/closestherearright side win‐dow
→80
AbOpens/closestherear left side window→80
BChild safety lockfortherear side windows→62
COpensthe door→69
D76Locks/unlocksthevehicle→69
EAdjuststhe 4-waylumbar support→95
FSetsthe seatfore-and-aft adjustment→91
GSeat adjustment usingthe multimedia system→97
HAdjuststhe headrestraints→96
IAdjuststhe seat height→91
JAdjuststhe seat backrest inclination→91
Ataglance – Door control panel and seat adjustment17

\nWARNINGRisk of accident duetoobjects inthe driver'sfootwell
Objects inthe driver'sfootwell may impedepedal travel or block a depressed pedal.
This jeopardizesthe operating androadsafety ofthevehicle.
Stowall objects inthevehicle securelysothattheycannotgetintothe driver'sfootwell.
Always installthefloor mats securelyand as prescribed in ordertoensurethatthere is always sufficientroomforthe pedals.
Do not use loosefloor mats and do notplacefloor mats ontop of one another.
NOTEBattery discharging from usingdevices connectedtothe diagnosticsconnection
Using devices atthe diagnostics connectiondrainsthe battery.
Checkthechargelevel ofthe battery.
Ifthechargelevel is low,chargethebattery,e.g.bydriving a considerabledistance.
Connecting equipmenttothe diagnostics con‐nection can leadtoemissions monitoring infor‐mation beingreset,forexample. This may leadtothevehiclefailingtomeettherequirements ofthe next emissions inspection duringthe maininspection.
Qualified specialistworkshop
An authorized Mercedes-Benz Center is aquali‐fied specialistworkshop. It hasthe necessaryspecial skills,tools andqualificationstocor‐rectly carryouttheworkrequired onyourvehi‐cle. This particularlyappliestosafety-relevantworks.
Forthefollowing, always haveyourvehiclechecked at an authorized Mercedes-Benz Cen‐ter:
Rsafety-relevantworks
Rservice and maintenancework
Rrepairwork
Rmodifications aswell as installations andconversions
Rworkon electronic components
Mercedes‑Benzrecommends a Mercedes‑Benzservice center.
Correct use ofthevehicle
Ifyouremoveanywarningstickers,you orotherscouldfailtorecognize certain dangers. Leavewarningstickersin position.
Observethefollowing information in particularwhen drivingyourvehicle:
Rthe safety notes inthis manual
Rtechnical dataforthevehicle
Rtrafficrules andregulations
Rlawsand safetystandards pertainingtomotorvehicles
26General notes

Only use seat belts which havebeen approvedforyourvehiclebyMercedes-Benz.
\nWARNINGRisk of injuryor death fromdeployedpyrotechnic EmergencyTen‐sioning Devices
Pyrotechnic EmergencyTensioning Devicesthat havebeen deployed are no longer opera‐tional and are unabletoperformtheir inten‐ded protective function.
Therefore, havedeployedpyrotechnicEmergencyTensioning Devices immedi‐atelyreplaced at aqualified specialistworkshop.
Mercedes-Benzrecommendsthatyou havethevehicletowedtoaqualified specialistworkshopafter an accident.
NOTEDamagecausedbytrappingtheseat belt
If an unused seat belt is not fullyretracted, itmay become trapped inthe door or intheseat mechanism.
Always ensurethat an unused seat beltis fullyretracted.
Releasingtherear passenger compartmentcenter seat belt
Ifthe left-handrear seat backrest isfolded downand back up again, it may not be possibletopullouttherear passenger compartment center seatbelt. The seat belt must bereleased.
Pullthe seat belt out approximately 1 in(25 mm) atthe seat belt outlet onthe seatbackrest andthenrelease it again.The seat belt isretracted andreleased.
Fastening and adjustingthe seat belts
Ifthe seat belt is pulledquickly or sharply,theseat beltretractor locks. The seat beltstrap can‐not be pulled out any further.
Always engage seat belttongue2oftheseat belt into seat belt buckle1ofthe cor‐responding seat.
Press and holdthe seat belt outletreleaseand slide seat belt outlet3intothe desiredposition.
Let go ofthe seat belt outletrelease andensurethat seat belt outlet3locksintoposition.
38Occupant safety

Reversingthe PRE-SAFE®system measures
If an accident did not occur,the pre-emptivemeasuresthatweretaken arereversed.
You will needtoperformcertain settingsyour‐self.
Ifthe seat belt pre-tensioning is notreduced,movethe seat backrest back slightly.The locking mechanismreleases.
Function of PRE-SAFE®PLUS (anticipatoryoccupant protection plus)
PRE-SAFE®PLUS can detect certain impacts,particularlyan imminentrear impact, andtakepre-emptive measurestoprotectthevehicleoccupants. These measures cannot necessarilyprevent an imminent impact.
PRE-SAFE®PLUS can implementthefollowingmeasures independently of eachother:
RTighteningthe seat belts onthe driver's seatand front passenger seat.
RIncreasing brake pressure whenthevehicleisstationary.This brake application is can‐
celed automatically whenthevehicle pullsaway.
If an accident did not occur,the pre-emptivemeasuresthatweretaken arereversed.
System limitations
The system will not initiate any action inthefol‐lowing situations:
Rwhen backing up
The system will not initiate any braking applica‐tion inthefollowing situations:
Rwhilst driving
or
Rwhen entering orexiting a parking spacewhile usingActiveParking Assist
Safely transportingchildren inthevehicle
Always observewhenchildren are travelinginthevehicle
Alsostrictly observethe safety notesforthespecific situation. Inthiswayyou canrecog‐nize potentialrisks andavoid dangers ifchil‐
dren are traveling inthevehicle(page 49).
Be diligentBear in mindthat neglectingtosecure achild inthechildrestraint system may haveserious con‐sequences. Always be diligent in securing achildcarefully beforeevery journey.
Toimprove protectionforchildrenyoungerthan12years old or under 5ft(1.50 m) in height,Mercedes-Benzrecommendsyou observethefollowing information:
RAlways securethechild in achildrestraintsystem suitableforthis Mercedes-Benzvehi‐cle.
RThechildrestraint system must be appropri‐atetothe age,weight and size ofthechild.
RThevehicle seat must be suitablefor instal‐ling achildrestraint system.
Accidentstatistics showthatchildren secured intherear seats aregenerallysaferthanchildrensecured inthe front seats.Forthisreason,Mercedes-Benzstrongly advisesthatyou installachildrestraint system on arear seat.
48Occupant safety

Observewhenstopping or parking
\nWARNINGRisk of accident and injuryduetochildren and animals left unatten‐ded inthevehicle
Ifyou leavechildren and animals unattendedinthevehicle,theymay be abletosetthevehicle in motion,forexampleby:
RReleasingthe parking brake.
RShiftingthe automatic transmission outof park position].
RStartingthe engine.
In addition,theymay operatevehicle equip‐ment and become trapped.
Never leavechildren and animals unat‐tended inthevehicle.
When leavingthevehicle, alwaystakethe SmartKeywithyou and lockthevehicle.
\nWARNINGRisk offatal injury duetoexposuretoextreme heat or cold inthevehicle
If people – particularlychildren – areexposedtoextremetemperaturesover an
extended period of time,there is arisk ofserious orevenfatal injury.
Never leaveanyone – particularlychil‐dren – unattended inthevehicle.
Never leaveanimals inthevehicle unat‐tended.
52Occupant safety

RObjects or loads inthe trunk/cargo com‐partment cannotberestrainedbytheseat backrest.
Make surethatthe seat backrest andtherear benchseat/rear seat areengaged beforeeverytrip.
Iftherear seat backrest is not engaged andlocked,thered lockverification indicator will bevisible.
\nWARNINGRisk of injuryor death ifthepermissible gross mass ofthechild andchildrestraint system isexceeded
ForLATCH-type (ISOFIX)childrestraint sys‐tems in whichthechild is secured usingtheintegrated seat belt inthechildrestraint sys‐tem,the permissible gross mass ofthechildandchildrestraint system is73lb (33kg).
Ifthechild andthechildrestraint systemtogetherweigh morethan73lb (33kg),theLATCH-type (ISOFIX)childrestraint systemwith integrated seat belt does not offer suffi‐
cient protection. Anexcessive load may beplaced ontheLATCH-type (ISOFIX)child seatattachments andthechild may not berestrained intheevent of an accident,forexample.
Ifthechild andthechildrestraint sys‐temtogetherweigh morethan73lb(33kg), useonly aLATCH-type (ISOFIX)childrestraint systemthat securesthechild withthevehicle seat belt.
Also securethechildrestraint systemwiththeTopTether belt, ifavailable.
Always comply withthe information aboutthemass ofthechildrestraint system:
Rinthe manufacturer's installation and operat‐ing instructionsforthechildrestraint systemused
Ron a label onthechildrestraint system, ifpresent
Regularlycheckthatthe permissible gross massofthechild andchildrestraint system isstillcomplied with.
Whenyou are installing achildrestraint system,observethefollowing:
sAlways observethe correct use andthe suit‐ability ofthe seatsfor attaching achildrestraint system.
sAlways comply withthe manufacturer'sinstallation and operating instructionsforthechildrestraint system used.
sMake surethatthechild'sfeetdo nottouchthe front seat. If necessary,movethe frontseatforward slightly.
Whenyou are installing aLATCH-type(ISOFIX)childrestraint system, observethefol‐lowing:
sWhenyou are using a Group 0/0+ babycar seat and a Group 1rearward-facingchildrestraint system on arear seat:adjustthe front seat sothatthe seat doesnottouchthechildrestraint system.
sWhenyou are using a Group 1forward-facingchildrestraint system:removetheheadrestraint fromtherespective seat, if
Occupant safety55

possible. In addition,the seat backrest ofthechildrestraint system must, asfar aspossible, lieflat againstthe backrest ofthevehicle seat.
Afterthechildrestraint system has beenremoved,replacethe headrestraints againimmediately and adjustthem correctly.
sFor certainchildrestraint systems inweightgroup 2 or 3,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not beten‐sioned betweentheroof andthe seat cush‐ion and/or be installedfacingthe wrongdirection. Where possible, adjustthe seatcushion inclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
1LATCH-type (ISOFIX) mounting bracket
Beforeevery trip, make surethattheLATCH-type(ISOFIX)childrestraint system is engaged cor‐rectly in bothmounting brackets inthevehicle.
NOTEBe careful nottodamagethe seatbeltforthe center seat when installingthechildrestraint system
Make surethatthe seat belt is not trap‐ped.
AttachtheLATCH-type (ISOFIX)childrestraint systemtobothmounting bracketsinthevehicle.
SecuringTopTether
\nWARNINGRisk of injuryor death iftherear seat backrests are not locked afterinstallingTopTether belts
Iftherear seat backrests are not locked,theycouldfoldforwards intheevent of an acci‐dent or during braking or suddenchanges ofdirection.
As aresult,childrestraint systems cannotperformtheir intended protective function.Rear seat backreststhat are not locked can
56Occupant safety

also cause additional injuries, e.g. intheevent of an accident.
Always lockrear seat backrests afterinstallingTopTether belts.
Observethe lockverification indicator.
Iftherear seat backrest is not engaged andlocked,thered lockverification indicator will bevisible.Ifthechildrestraint system is equippedwith aTopTether belt:
Therisk of injury can bereducedbyTo pTether. TheTopTether beltfacilitates anadditional connection betweenthechildrestraint system attached withLATCH-type (ISOFIX) andthevehicle.If necessary,moveheadrestraint1upwards (page97).
Fold up cover2ofTopTether anchorage3.
InstalltheLATCH-type (ISOFIX)childrestraintsystem withTopTether. Always comply withthechildrestraint system manufacturer'sinstallation instructions when doing so.
GuideTopTether belt4under headrestraint1betweenthe two headrestraintbars.
HookTopTether hook5ofTopTether belt4without twisting intoTopTether anchor‐age3.
TensionTopTether belt4. Always complywiththechildrestraint system manufactur‐er's installation instructions when doing so.
Fold down cover2ofTopTether anchorage3.
If necessary,slide headrestraint1down‐wards (page97). Make surethatyou
Occupant safety57

do not interferewiththe correctrouting ofTopTether belt4.
Securingthechildrestraint system withtheseat belt
Securingthechildrestraint system withtheseat belt ontherear seat
\nWARNINGRisk of injuryiftherearbenchseat/rear seat and seat backrestare not engaged
Iftherear benchseat/rear seat and seatbackrest are not engagedtheycouldfoldfor‐wards, e.g. when braking suddenly or intheevent of an accident.
RIfthis isthe case,thevehicle occupantwould beforced intothe seat beltbytherear benchseat/rear seat orbythe seatbackrest. The seat belt cannotprotect asintended and couldresult in additionalinjury.
RObjects or loads inthe trunk/cargo com‐partment cannotberestrainedbytheseat backrest.
Make surethatthe seat backrest andtherear benchseat/rear seat areengaged beforeeverytrip.
Iftherear seat backrest is not engaged andlocked,thered lockverification indicator will bevisible.
When installing a belt-securedchildrestraintsystem, observethefollowing:
sAlways comply withthe manufacturer'sinstallation and operating instructionsforthechildrestraint system used.
sWhen using a category 0/0+ baby carseat and a category Irearward-facingchildrestraint system on arear seat:adjustthe front seat sothatthe seat doesnottouchthechildrestraint system.
sWhen using a category Iforward-facingchildrestraint system:removethe headrestraint fromtherespective seat, if possi‐ble.
Afterremovingthechildrestraint system,replacethe headrestraints again immedi‐ately and adjustthem correctly.
sThe backrestoftheforward-facingchildrestraint system must, asfar as possible, beresting onthe seat backrest oftherearseat.
sFor certainchildrestraint systems inweightcategory II or III,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not be putunderstrain betweentheroof andthe seatcushion and/or be installedfacingthewrong direction. Where possible, adjusttheseat cushion inclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
sMake surethatthechild'sfeetdo nottouchthe front seat. If necessary,movethe frontseatforward slightly.
58Occupant safety

Child safety locks
Activating/deactivating thechild safety lockfor therear doors
\nWARNINGRisk of accident and injuryduetochildren and animals left unatten‐ded inthevehicle
Ifyou leavechildren and animals unattendedinthevehicle,theymay be abletosetthevehicle in motion,forexampleby:
RReleasingthe parking brake.
RShiftingthe automatic transmission outof park position].
RStartingthe engine.
In addition,theymay operatevehicle equip‐ment and become trapped.
Never leavechildren and animals unat‐tended inthevehicle.
When leavingthevehicle, alwaystakethe SmartKeywithyou and lockthevehicle.
\nWARNINGRisk offatal injury duetoexposuretoextreme heat or cold inthevehicle
If people – particularlychildren – areexposedtoextremetemperaturesover anextended period of time,there is arisk ofserious orevenfatal injury.
Never leaveanyone – particularlychil‐dren – unattended inthevehicle.
Never leaveanimals inthevehicle unat‐tended.
\nWARNINGRisk of accident and injuryduetochildren left unattended inthevehicle
Whenchildren are traveling inthevehicle,theycould:
Ropen doors,thereby endangeringotherpeople orroad users
Rgetout ofthevehicle and be hitbytraffic
Roperatevehicle equipment and becometrapped,forexample
Whenchildren are traveling inthevehi‐cle, always activatetheavailablechildsafety locks.
Never leavechildren unattended inthevehicle.
When leavingthevehicle, alwaystakethekey withyou and lockthevehicle.
Child safety locksfortherear doors andtherearside windowsareavailable.Thechild safety lock ontherear doors secureseach door separately.The doors can no longerbe opened fromthe inside.
Occupant safety61