MERCEDES-BENZ C CLASS 2023 Owners Manual

Page 271 of 490

De-authorizing the mobile deviceSelect TRACK PACE App .Select a device.ConNrm the message prompt with Yes.
The device will be de-authorized.
Setting the TRACK PACE display on the head-up
display and driver\bs display
Select IC and HUD Contents .Activate or deactivate the desired content.
The content on the head-up display and the
driver\bs display will be adapted.\bFor further information on the head-up display (  page 243).\bFurther information about the driver\bs display
(  page 241).
Setting acoustic feedback
Select Acoustic Feedback .
A scale with values from 0 to 10 will be
shown.Select a setting.Displaying statisticsSelect TRACK PACE Statistics .
Statistics on the current user proNle will be
displayed.
The following data will be displayed:
= Driving time
= Track driven
= Recorded tracks
= Recorded track races
= Laps recorded
= Recorded drag races
= Top speed
Activating the ambient light
If this function is active, the vehicle interior will be
lit in red or green depending on delta time.
Select Ambient Light .Activate or deactivate the function.
Adjusting the dashcam
If the vehicle is equipped with a dashcam, it can be used in AMG TRACK PACE.
Select Dashcam .Select Track Race or Drag Race and activate
Activate Recording .You can set which overlay is to be used in the
recorded video under Video Overlay Content .
Navigation and traPc
Notes on navigation
Route guidance with augmented reality
&WARNING Risk of accident and injury as a
result of distraction, incorrect depiction or
wrong interpretation of the display
The camera image of the augmented reality
display is not suitable as a guide for driving.
Always keep an eye on the actual traPc
situation.Avoid extended observation of the cam-
era image.MBUX multimedia system269

Page 272 of 490

&WARNING Risk of accident and injury due
to imprecise positioning of additional
information
The additional information from the augmen-
ted reality display may be inaccurate and is not a substitute for observing and assessing
the actual driving situation.
Always keep an eye on the actual traPc
situation when carrying out all driving
maneuvers.
Switching navigation on
Multimedia system:
4 ©
Alternatively, press the © button on the
steering wheel on the right (  page 253).
The zero layer with the digital map is dis-
played.Navigation overview
Digital map
1Navigation module (reduced view)Route guidance active:The navigation module shows the information
relevant to the route in the zoomed-out view, e.g. the destination or a traPc delay{ ends the current route guidanceTapping opens the navigation module in the
expanded view with the Route2Destination entry3Searches for a parking space4Map orientation

Page 273 of 490

=3D and direction of travel
= Map with complete route\bIf the map is moved, the map switches
between 3D direction of travel and 2D north
orientation.
The following map types 4 are available:
= Daytime display
= Night-time display
= Satellite map
\bIf you notice a problem with the digital map
you can report this under https://
mapfeedback.here.com/#/report.Navigation module (expanded view)Example: route guidance is active1Destination2Searches for a gas station3Switches traPc information display on or oMOverview of the toll system\bThe toll system is optional equipment and is
not available in all vehicles.
Debiting of toll charges at freeway toll gates is
facilitated with an electronic payment system.
The toll system uses RFID (Radio Frequency Iden-
tiNcation) for data transfer between the control
unit and the toll station.
The toll system is initially switched oM at the fac-
tory.
The control unit is in the vehicle glove box. In order to be able to use the toll system, it musthave been registered by the customer and activa-ted by the service provider:
= Activate the toll system in the settings of the
MBUX multimedia system or on the control unit.
= There are two ways to register and activate:
- In the Mercedes me App, register the unit
identiNcation number of the control unit
and activate the toll system.
MBUX multimedia system271

Page 274 of 490

-Alternatively, you can register and activate
via the Toll Service app.
Activation of the toll system can take up to
48 hours aser registration.
When the toll system is activated, the number of
vehicle occupants is Nrst preset by the factory at
one person.
In order to use the toll system, the device in the
glove box or in the MBUX multimedia system must be switched on.
The following applies for roads on which toll charges are dependent on the number of vehicle occupants:
= If the automatic detection of the number of
vehicle occupants is switched oM, the number
of vehicle occupants must be selected man- ually. This ensures correct toll accounting.
= The number of vehicle occupants can be
transmitted automatically. In the process, the number of seat belts worn is determined.
If the number of detected persons does not
correspond with the number of personsactually in the vehicle, the number of persons
must be manually selected.
The standard setting of one person does not need to be changed for roads which require toll pay-
ment regardless of the number of vehicle occu-
pants.
The toll system enables the payment of toll
charges in many states of the USA.\bIn Mexico, for example, the toll system can be
registered and activated for journeys to the USA.
Notes on use
= Drive at the prescribed vehicle speed in the
toll lane.
= The toll will be debited automatically only aser
registration and activation of the toll system.
= For safety reasons, entries should be made
while the vehicle is stationary.
= For further information, please consult the
Mercedes me App or an authorized Mercedes-
Benz Center.
Or call 1-800-FOR-MERCedes (in the USA) or 1-800-387-0100 (in Canada).
For information on how to register and activate
the toll system, see the Digital Operator\bs Manual.
Entering a destination
Requirements: = For the online search:
- There is an Internet connection.
- Mercedes me connect is available.
- You have set up a user account in the
Mercedes me Portal.
- The vehicle is connected with the user
account and you have accepted the terms
of use.
- Further information can be found at:
https://www.mercedes.me
- The service is available.
- The service has been activated at an
authorized Mercedes-Benz Center.
272MBUX multimedia system

Page 275 of 490

Multimedia system:4 © 5
ªExample: entering a POI or address1Input line with current entry2Search result3Selects destination input, displays further
destination inputs with double arrow4Deletes an entry5Adopts the search result in the input line and
continues the search6Deletes the last character entered7Hides the keypad8Switches to handwriting recognition9Starts the MBUX voice assistantASets the written languageBSwitches to digits and special charactersCSwitches to upper-case or lower-case lettersEnter the destination in 1. The entries can
be made in any order. The search results are displayed in a list.\bOnline search results for POIs may contain
additional information, for example opening
times and prices. The information is provided
by an online map service.
This online function is not available in all
countries.\bYou can enter a destination as a 3 word
address from what3words. This option is not
available in all countries.Hide the keyboard with v.Select the destination in the list.
The route is calculated.\bObserve the notes on the MBUX multimedia
system (  page 247).MBUX multimedia system273

Page 276 of 490

Calculating a route and using settings for route
guidance
Detailed display with a route (example)
1Calls up alternative routes2Adds an intermediate destination to the route and recalculates the route3Sets intermediate destination as new destina-tion and calculates new route4Selects a point of interest in the vicinity of the destination5Address of the intermediate destination
Aser selection of a destination the route is be cal-
culated.
\bIf there is no route yet, the route guidance starts aser selecting  Let's Go! .Select one of the options.
Calling up the route overview
Select Routes .Select an alternative route.
Starting route guidance
Select  Let's Go! .
Calling up the detailed display with destination
address
Pull the bar above the  Let's Go! symbol
upwards.
Depending on the destination selection and
availability, online content, for example rat-
ings, prices and weather information, is
shown.To share a destination: select

Page 277 of 490

announcements for the route are taken into
account via Reroute Based on Traffic H .\bTrailer mode and online routes are not availa-
ble in all countries and for all vehicles.
Calculating alternative routes
In the navigation module (expanded view), select =.Select View.Activate Route Overview after Start .
Alternative routes are calculated for every
route.
Selecting alternative routes
\bIf Route Overview after Start has been
switched on and a route has been calculated,
the function is available.In the navigation module (expanded view), select Alternative Routes .When the alternative routes have been calcu-
lated, display the route in the navigation win-
dow by swiping to the right or les.Select Start.Activating a commuter route\bA user proNle has been created and Allow
Destination Suggestions has been activated
in the user options (  page 257). Route guid-
ance is not active.In the navigation module (expanded view), select =.Select Route.Activate Activate Commuter Route .
The navigation system automatically detects
that the vehicle is on a commuter route.
For the daily commuter route, traPc events on
the route are also reported when driving with-
out active route guidance.To select or delete a commuter route:
select Start or

Page 278 of 490

Activate Street Names and House Numbers .
During route guidance, the activated options
are shown as additional information in the
camera image.
Using map functions
Multimedia system:
4 ©
Increasing map scale
When the map is shown, tap twice quickly with
one Nnger on the central display.
or
Move two Nngers apart on the central display.
Decreasing map scale
Tap with two Nngers on the central display.
or
Move two Nngers together on the central dis-
play.
Moving the map
When the map is displayed, swipe in any direc-
tion with one Nnger on the central display.To reset the map to the current vehicle posi-
tion: select = Center .
Selecting map orientation
Tap repeatedly on the

Page 279 of 490

The traPc delay is displayed for the current
route. The smallest value for the display for
traPc delays is a minute.
Displaying hazard warnings
If hazard warnings are available these can be
shown as symbols on the map. The display
depends on the settings for the Traffic Incidents
option.
In the navigation module (expanded view), select = ( page 270).Activate or deactivate Traffic Incidents.
If the option is activated, all of the symbols are shown.
If the option is deactivated, the symbols are
only shown when there is a hazard warning.
The following hazards may be shown on the
map:
= Accidents and breakdowns
= Slippery roads, fog, crosswinds and heavy
rain
= Hazards reported manually
= Vehicle with active hazard warning light=
Roadworks
= Additional hazards (if available)
Displaying online map contents
In the navigation module (expanded view),
select = .Select View.Switch on an online service, e.g. Weather.
Current weather information is displayed on
the navigation map, e.g. temperature or cloud
cover.
The service information is not shown in all
map scales, e.g. weather symbols.
Parking service
*NOTE Damage to the vehicle due to not
observing the maximum permitted head-
room clearance
If the vehicle height is greater than the maxi- mum permitted headroom clearance, the roof
and other parts of the vehicle may be dam-
aged.
Observe the signposted headroom clear- ance.If the vehicle height is greater than the permitted headroom clearance, do not
enter.Observe the changed vehicle height with add-on roof equipment.*NOTE Vehicle damage due to failure to
observe local information and parking
conditions
The data is based on the information provided
by the respective service providers.
Mercedes-Benz does not guarantee the accu-
racy of the information provided in relation to
the car park or parking area.
Always observe the local information and
conditions.\bThis service is not available in all countries.In the navigation module (expanded view), select = and switch on Parking.MBUX multimedia system277

Page 280 of 490

Tap on ] in the map.Select a parking option.
The map shows the parking options in the
vicinity.
The following information is displayed (if avail- able):
= Destination address, distance from current
vehicle position and arrival time
= Information on the parking garage/parking
lot
For example, opening times, parking
charges, current occupancy, maximum
parking time, maximum access height .
The maximum access height shown by the parking service does not replace the need
for observation of the actual circumstan-
ces.
= Available payment options (Mercedes pay,
coins, bank notes, cards)
= Details on parking tariMs
= Number of available parking spaces
= Payment method (e.g. at parking meters)= Services/facilities at the parking option
= Telephone numberCalculate the route (  page 274).
Notes on the dashcam
*NOTE Risk of legal consequences follow-
ing violation of legal regulations and data
protection requirements
You are legally responsible for operation and
use of the dashcam functions.
The legal requirements relating to operation
and use of the dashcam can vary depending
on the country in which the dashcam is oper-
ated.
This function is not permitted in all countries.
Before using the dashcam, read up on
the content of the legal regulations, in
particular the data protection require-
ments in the respective country of use.Observe the legal regulations, in particu-
lar the data protection requirements.\bTo ensure secure operation, only use FAT32
or exFAT formatted USB storage devices.\bThe Nle size and therefore the duration of sin-
gle recording is limited by the limitations of the USB Oash drive format. So FAT32 format-
ted USB Oash drives do not allow Nles larger
than 4 GB, for example. When the Nle size is reached, the recording
stops and you receive a notiNcation.\bThe following functions are available in the
Gallery app:
= Switching write protection on or oM
= Deleting video Nles
Selecting a USB device for a video recording with
the dashcam
Requirements: = At least one USB device is connected with the
multimedia system .
Multimedia system: 4 © 5
Apps 5
Dashcam
Select the USB symbol.278MBUX multimedia system

Page:   < prev 1-10 ... 231-240 241-250 251-260 261-270 271-280 281-290 291-300 301-310 311-320 ... 490 next >