clock MERCEDES-BENZ CLK-CLASS 2004 Owner's Manual

376 Practical hintsReplacing bulbsFront lamps Bi-Xenon*-type
1Bulb socket for turn signal lamp
2Housing cover for high beam flasher
lamp
3Housing cover for Bi-Xenon* lamp4High beam flasher bulb
5Parking and standing lampHigh beam bulb for high beam flasher

Switch off the lights.

Open the hood (
page 287).

Turn housing cover2 counterclock-
wise and remove.

Turn bulb holder 4 with the bulb coun-
terclockwise and remove.

Press the bulb backwards and turn
counterclockwise out of the bulb hold-
er.

Press the new bulb into the holder and
twist it clockwise.

Place the bulb holder back into the
lamp and turn it clockwise.

Place the housing cover 2 back on
and turn them clockwise.
Warning!
G
Do not remove the cover
3
for the Bi-Xe-
non* headlamp. Because of high voltage in
xenon lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
We recommend that you have such work
done by a qualified technician.
ProCarManuals.com

377 Practical hints
Replacing bulbs
Front turn signal lamp bulb
Switch off the lights.

Open the hood (
page 287).

Twist bulb socket1 counterclockwise
and pull out.

Push bulb into socket, turn counter-
clockwise and remove.

Insert new bulb in socket, push in and
twist clockwise.

Reinsert bulb socket in lamp and twist
clockwise.Parking and standing lamp bulb

Switch off the lights.

Open the hood (
page 287).

Turn housing cover2 counterclock-
wise and remove.

Pull out the bulb socket with the bulb.

Pull the bulb out of the bulb socket.

Insert a new bulb in the socket.

Reinstall the bulb socket.

Align housing cover and click into
place.
Side marker lamp bulb
Switch off the lights.

Carefully slide lamp towards rear.

Remove front end first.

Twist bulb socket counterclockwise
and pull out.

Pull bulb out of the bulb socket.

Insert new bulb in socket.

Reinstall bulb socket, push in and twist
clockwise.

To reinstall lamp, set rear end in
bumper and let front end snap into
place.
ProCarManuals.com

378 Practical hintsReplacing bulbsReplacing bulbs for rear lamps
Tail lamp assemblies
1Brake lamp
2Turn signal lamp
3Backup lamp
4Standing and side marker lamp
5Rear fog lamp (driver’s side)/tail
Switch off the lights.

Open trunk.

Swing the trim panel covering the cor-
responding rear lights to the side.

Squeeze tabs together and remove the
bulb holder with the bulb.

Twist bulb counterclockwise and pull
out of bulb holder.

Insert new bulb into the holder and turn
it clockwise.

Reinstall bulb holder. The tabs must au-
dibly click.

Close trim panel.

Place the housing cover back on so
that its tabs click in place. License plate lamp
1Screws

Switch off the lights.

Loosen both screws1 and remove
lamp.

Replace the tubular lamp and reinstall
lamp.

Retighten the screws.
ProCarManuals.com

384 Practical hintsFlat tire
Unscrew the alignment bolt, install last
wheel bolt and tighten slightly.Lowering the vehicle

Lower vehicle by turning crank coun-
terclockwise until the full weight of the
vehicle is resting on the ground.

Remove the jack.
1 - 5 Wheel bolts

Tighten the five wheel bolts evenly, fol-
lowing the diagonal sequence illustrat-
ed (1 to 5), until all bolts are tight.
Observe a tightening torque of 80 lb-ft
(110 Nm).

Before storing the jack in the trunk, it
should be fully collapsed, with handle
folded in.
Warning!
G
Only use genuine equipment
Mercedes-Benz wheel bolts. Other wheel
bolts may come loose.
Do not tighten the wheel bolts when the ve-
hicle is raised. Otherwise the vehicle could
tip over.
Warning!
G
Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque of
80 lb-ft (110 Nm).
ProCarManuals.com

387 Practical hints
Battery
Reconnecting the battery
Turn off all electrical consumers.

Connect the positive lead and fasten its
cover 2.

Connect the negative lead 1.

Reinstall the filter box (
page 385).Batteries contain materials that can harm
the environment if disposed of improperly.
Large 12-volt storage batteries contain
lead. Recycling of batteries is the preferred
method of disposal. Many states require
sellers of batteries to accept old batteries
for recycling.
!Never invert the terminal connections.!The battery, its filler caps and the vent
tube must always be securely installed
when the vehicle is in operation.
iThe following procedures must be car-
ried out following any interruption of
battery power (e.g. due to reconnect-
ing):

Set the clock (
page 144) (vehi-
cles with COMAND*: see COMAND
operator’s manual).


Resynchronize side windows
(page 214).
ProCarManuals.com

395 Practical hintsFuses
Fuse box in engine compartment
The fuse box is located in the engine com-
partment on the left-hand side.
2Cover
3Screw
4RetainerRemoving/installing cover

Twist screws3 90° counterclock-
wise.

Pull up cover2.

Slide out retainer4 and remove cover
by pulling towards front.

Install cover2 in reverse order.Opening fuse box
5Fuse box cover
6Clamps

Release clamps6.

Remove cover5.
Closing fuse box

Ensure that the sealing rubber is prop-
erly positioned.

Press the cover down and secure with
clamps6.
ProCarManuals.com

431 Index
Centigrade
Setting temperature units 142
Central locking
Automatic 107
From inside 108
Locking from inside 108
Switch 108
Switching on/off
(control system) 149
Unlocking from inside 108
Central locking switch 108
Changing
Batteries (SmartKey with
KEYLESS-GO*) 351
Batteries (SmartKey) 350
Key setting 149
Changing CDs 199
Charcoal filter 179
Activating 179
Deactivating 180
Charging
Vehicle battery 386
CHECK ENGINE
malfunction indicator lamp 314Checking
Coolant level 292
Oil level 286, 289
Tire inflate pressure 286
Vehicle lighting 286
Child safety 69
Airbags 60
Infant and child
restraint systems 64, 69
LATCH child seat anchors 73
Child safety switch see
Blocking of rear window operation
Child seat anchors see
LATCH child seat anchors
Cigarette lighter 254Cleaning
Cup holder 309
Distronic* system sensor cover 308
Gear selector lever 309
Hard plastic trim items 310
Headlamps 167
Headliner 310
Instrument cluster 309
Leather upholstery 310
Light alloy wheels 309
Nubuck leather upholstery
(CLK 55 AMG) 310
Parktronic* system sensor 308
Plastic and rubber parts 310
Seat belts 310
Soft top 306
Steering wheel 309
Upholstery 310
Windows 309
Windshield 50
Wiper blades 308
Wood trims 310
CLK 55 AMG
Manual shift program mode 164
Clock 23, 144
ProCarManuals.com

448 IndexSeat heating* 114
Switching on/off rapid heating
with seat ventilation* 115
Switching on/off rapid heating
without seat ventilation* 114
Switching on/off seat heating
with seat ventilation* 115
Switching on/off seat heating
without seat ventilation* 114
with seat ventilation* 115
without seat ventilation* 114
Seat ventilation* 113
Switching off 113
Switching on 113
Seats 109
Adjusting 34
Easy entry/exit feature 109
Multicontour seat* 112
Seat heating* 114
Seat ventilation* 113
Selecting
Display 143
Selecting display 144Selector lever
Lock 44
Message in display 325
Self-test
BabySmart
TM
airbag deactivation system 72
Tele Aid* 258
Service
Calling up the service indicator 303
Major service (Service B) 302
Minor service (Service A) 302
Overdue 302
Spare parts 398
Types 302
When due 302
Service (maintenance) 302
Service and Warranty Booklet
Loss of 399
Service and warranty information 10
Service indicator 302
Calling up 303
Clearing 302, 303
Service life (tires) 297
Service System see FSSSetting
Convenience functions 141, 149
Cruise control 227
Daytime running
lamp mode 145, 146
Distronic* time interval 236
Following distance in Distronic* 236
Higher speed in cruise control 228
Higher speed in Distronic* 234
Hours (clock) 144
Individual vehicle settings 139
Interior lighting
delayed switch-off 148
Key-dependent memory 151
Lamps and lighting
(control system) 145
Language, multifunction display 143
Locator lighting 146
Lower speed in cruise control 228
Lower speed in Distronic* 235
Miles/kilometers
in speedometer 142
Minutes (clock) 145
Parking position for exterior
rear view mirrors 151
ProCarManuals.com