MERCEDES-BENZ CLK-Class 2009 C208 Comand Manual

70 AudioMP3 CD operation

MP3 CD operationSafety instructionsWarning
G
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 44 feet (approximately 14 m)
every second.
Warning
G
The CD drive is a Class 1 laser product.

There is a danger of invisible laser radiation
when you open or damage the cover.Do not remove the cover. The CD drive does
not contain any parts which can be serviced
by the user. For safety reasons, have any ne
-
cessary service work performed by qualified
personnel.Tips on data storage media!Do not attach labels of any type to the
CD. They may become detached and
damage the drive.
!Your CD drive has been designed to
play CDs which correspond to the IEC
60908 standard. Therefore only CDs
not exceeding a thickness of 1.3 mm
can be used.If you insert thicker data carriers, e.g.
ones that have data on both sides (one
side with DVD data, the other side with
audio data), they will become stuck and
damage the drive.Do not play single CDs (80mm) with an
adapter. An adapter could become
stuck and damage the drive. Only use
12 cm diameter CDs.
209_MY09_A_US.book Seite 70 Montag, 26. Mai 2008 6:12 18

71 Audio
MP3 CD operation

Only touch the CD on the edges.

Clean the CD with a dry, lint-free cloth.
Wipe the CD a straight line from the
center. Never wipe the CD in a circular
motion.

Do not use rubbing alcohol or solvents
to clean CDs.

Do not expose the CDs to cold, heat or
direct sunlight.

Do not write or put labels on CDs.
Permissible MP3 CDs In MP3 mode COMAND can read CD-R and
CD-RW CDs.Permissible file systemsThe permitted file system for COMAND is
ISO9660/Joliet for CD-R and CD-RW.Multi session CDsMulti session CDs include mixed file types
(e.g. MP3 and audio CD) in either
successive or random order on the disc. In
MP3 mode, COMAND will integrate audio
CD tracks into the disc’s folder structure.
The CD audio track folder will appear first
followed by folders containing MP3 tracks.
Tips on caring for your MP3 CDs
Tips on creating MP3 CDsiCDs, software and hardware for writing
audio data to CDs vary widely.
Therefore, we cannot guarantee that
COMAND will be able to play every
user-written CD. Problems may also be
encountered during playback of user-
written CDs with a storage capacity of
more than 700 MB.
209_MY09_A_US.book Seite 71 Montag, 26. Mai 2008 6:12 18

72 AudioMP3 CD operationFile structureWhen creating a MP3 CD, you can organize
MP3 tracks into folders. A folder can also
contain additional folders.

A CD may have a maximum of 255 folders
in total.A maximum of 255 tracks are permissible
per folder.Mathematically a maximum of 65025
tracks would result. However, this amount
is usually not reached since MP3 requires
approx. 1 MB storage per minute recorded.

Track names and folder namesWhen creating an MP3 CD, you can assign
names to the MP3 tracks and folders.
COMAND uses these names in MP3 mode
for the corresponding display.Please note the following when assigning
folder and track names:
Track and folder names must contain
at least 1 character.

Track names may contain up to either
thirty or fifty characters depending on
the CD format. If a name exceeds this
character limit, COMAND will not be
able to display it in full.

Track names must have the extension
“mp3”.

A period must appear between the
track name and the file extension.Example of a correct track name:
Track1.mp3
Empty folders or folders containing data
other than MP3 or audio CD tracks will not
be displayed by COMAND.
209_MY09_A_US.book Seite 72 Montag, 26. Mai 2008 6:12 18

73 Audio
MP3 CD operation
If MP3 or audio CD files are stored in the
root directory itself, the root directory also
counts as a folder. COMAND will then
display the root directory name as a folder
name.Permissible MP3 formatsCOMAND supports the MPEG1
AudioLayer3 format.
Permissible bit and scan rates 
Fixed and variable bit rates up to 320
kbps

Scan rates from 24 kHz - 48 kHz
The music tracks that you can create for
play back in MP3 mode are generally
copyright-protected under applicable in-
ternational and national laws. In many countries, the reproduction of
copyrighted material is not permitted,
even if only for personal use, without the
express prior consent of the copyright
holder.Please check the current copyright laws
for your country and comply with them.These restrictions do not apply for exam-
ple to your own compositions and record-
ings, or for recordings for which
authorization has been obtained from the
copyright holder.
iCOMAND does not support ID3tags.Tips on creating MP3 tracks iIn everyday speech, this format has
been replaced by the designation
“MP3”.
iIt is recommended to use MP3 tracks
with a bit rate of128 kbps or higher and
with a scan rate of 44.1 kHz or higher.
Lower rates may impair quality. This is
particularly true if the sound function LOGIC7 Surround
has been activated.
Tips on copyright
209_MY09_A_US.book Seite 73 Montag, 26. Mai 2008 6:12 18

74 AudioMP3 CD operation
Activate the MP3 main menu ( page
75)
.
or
Load a MP3 CD into the CD drive ( page
56)
.
Loading a MP3 CD into the CD drive is the
same as described for audio CDs.
Load a MP3 CD
( page
56)
.
After inserting a MP3 CD into the CD drive
the COMAND loads the data. It may take a
while to load the data, depending on the
number of folders and tracks.After loading, COMAND plays the MP3 CD.
Ejecting a MP3 CD out of the CD drive is
the same as described for audio CDs.
Eject a MP3 CD
( page
56)
.
Switching to MP3 CD modeiA MP3 CD is played in the same drive
as a audio CD. The CD drive is located
behind of the display unit
( page
57)
.
Loading a MP3 CD
Ejecting a MP3 CDiDepending on vehicle production date
the MP3 CD feature may not be
available in your vehicle.
209_MY09_A_US.book Seite 74 Montag, 26. Mai 2008 6:12 18

75 Audio
MP3 CD operation

Activate the Audio menu
( page
46)
.

Press the
MP3
soft key
.
It may take a while to load the data
depending on the number of folders
and tracks.If the MP3 CD is loaded, the MP3 main
menu will appear.
MP3 main menu1Current folder2Current MP3 track3Track number within the current fold-
er/number of tracks in current folder4Elapsed playback time of the current
track
If the MP3 can not be read, the
message
CD error
will appear.
MP3 main menuiThe
MP3
soft key is visible if a MP3
CD is already loaded. If not, the
CD

soft key will appear. In this case, load a
MP3 CD first.
iOn MP3 tracks with variable bit rates,
the elapsed track time displayed may
deviate from the actual time elapsed.
209_MY09_A_US.book Seite 75 Montag, 26. Mai 2008 6:12 18

76 AudioMP3 CD operationIf the MP3 tracks are organized into folders
on the CD, you can select a folder from the
COMAND control unit.The following options are available:
Selecting via the MP3 main menu

Selecting via the folder list
Selecting via the MP3 main menuOnly one folder can be viewed at a time.1Current folder

Activate the MP3 main menu. ( page
75)
.

Push the joystick to H or h to
select a folder.

Wait approx. 3 seconds.The COMAND changes the folder and
loads the data from the new folder. It
may take a while to load the data, de-
pending on the number of folders and
tracks.Playback of the first track of the
selected folder will begin.The track list displays the tracks of the
selected folder.
Selecting a folder
iThe folder list only contains folders in
which MP3 or audio CD tracks are
stored.After inserting a MP3 CD, the COMAND
loads the data. After loading, you can
use this function.
209_MY09_A_US.book Seite 76 Montag, 26. Mai 2008 6:12 18

77 Audio
MP3 CD operation
Selecting via the folder list
In the MP3 main menu
( page
75)
,
press the
Folder
soft key. The folder
list appears.

Push the joystick to G
or
g
to
select a folder.

Press E.COMAND changes the folder and loads
the data from the new folder. It may
take a while to load the data de-
pending on the number of folders and
tracks.
If a
folder was selected:
A list of MP3 tracks appears.If a
folder was selected:
The next level of the folder structure
will appear.

Push the joystick to G
or
g
to
select a track or another folder. Repeat
until desired track or folder appears.
The
Play
soft key is available if a track
is selected or the selected folder
contains only tracks and no subfolders.
When pressed, playback of the
highlighted track or the first track in
the selected folder will begin.
To go up one level in the folder structure:
Press
the
soft key.
iThe folder list only contains folders in
which MP3 or audio CD tracks are
stored.After inserting a MP3 CD the COMAND
begins loading the data. The
Folder

soft key may be greyed out during that
time. Once loaded the folder soft key is
available.
i
Folder contains MP3 tracksFolder contains subfoldersMP3 CD name
209_MY09_A_US.book Seite 77 Montag, 26. Mai 2008 6:12 18

78 AudioMP3 CD operationYou can select a track:
by using G
or
g in the track list

with g or h

with the number keypad

with Scan
In the track listThe track list includes all tracks of the CD
or currently selected folder. Only one list
entry is visible at a time.1Current folder
Activate the MP3 main menu ( page
75)
.

Push the joystick G
or
g
to move
forward or backward through the track
list.

Press E
.
Using Skip track 
Activate the MP3 main menu ( page
75)
.
Forward
Press
D
.
The next track from the track list is
played.
Track selectiIf there are tracks on the MP3 CD that
can not be read, you will not see any
error messages. The audio output will
be muted and a search will begin to the
next readable position.iAt any time during playback an
expanded view of a track title can be
displayed by pressing the
Detail
soft
key.
iIf the last track in a folder is playing,
the first track is selected.
209_MY09_A_US.book Seite 78 Montag, 26. Mai 2008 6:12 18

79 Audio
MP3 CD operation
Backward
Press d
.
If the track has been playing for more
than approx. 10 seconds, the track is
replayed from the start. If the playing
time is shorter, the previous track is
played.
With the number keypadThe tracks of the current folder can be
selected with this function.
Activate the MP3 main menu ( page
75)
.

In short succession, press button *
and the number key of the desired
track, e.g. 8.
1Number of tracks in the current folder
(10 tracks)
After your entry the selected track is
played and visible.
Using MP3 track scanThe tracks of the current folder can be
scanned one after the other for 8 seconds
each. Subfolders are not considered.The function will switch off automatically
when the beginning track is reached.You can also manually stop the scan
search.Starting the scan search
Activate the MP3 main menu ( page
75)
.

Press the
Scan
soft key.
iIf the current folder contains less than
10 tracks, the system will only recogni
-
ze the first digit entered and play the
appropriate track.
iWhen you start the scan search, the
playback mode
Normal
sequence
( page
81)
is automatically activated.
209_MY09_A_US.book Seite 79 Montag, 26. Mai 2008 6:12 18