headlamp MERCEDES-BENZ CLS 2014 Owners Manual

ATA (Anti-TheftAlarmsystem)
Activating/deactivating...................74
Function ...........................................74
Switching off the alarm....................74
ATTENTIONASSIST
Activating/deactivating.................228
Display message............................251
Function/notes.............................203
Audio system
see separate operating instructions
Authorized Mercedes-Benz Center
see Qualified specialist workshop
AUTO lights
Display message............................247
see Lights
Automatic engine start (ECO start/
stop function)....................................152
Automatic engine switch-off (ECO
start/stop function)..........................151
Automatic headlamp mode..............117
Automatic transmission
Automatic drive program...............160
Changing gear...............................158
DIRECT SELECT lever.....................155
Display message............................260
Drive program display....................156
Driving tips....................................158
Emergency running mode..............164
Engaging drive position .................. 158
Engaging neutral............................157
Engaging parkposition (AMG
vehicles)........................................157
Engaging reversegear...................157
Engaging the parkposition............156
Kickdown.......................................159
Manual drive program....................161
Manual drive program (AMG
vehicles)........................................162
Manual drive program (vehicles
with Sports package AMG)............162
Overview........................................155
Problem (malfunction)...................164
Programselectorbutton................159
Pulling away...................................150
Selector lever................................155
Shift ranges...................................162
Starting the engine........................149
Steering wheel paddle shifters......160
Transmission position display........155
Transmissionposition display
(DIRECT SELECT lever) ...................156
Transmissionpositions..................158
Automatic transmission
emergency mode............................... 164
B
Backup lamp
Changing bulbs..............................125
Bag hook............................................283
BAS (Brake Assist System).................67
BAS PLUS(Brake Assist System
PLUS)....................................................67
Battery (SmartKey)
Checking .......................................... 79
Important safety notes....................79
Replacing.........................................79
Battery (vehicle)
Charging........................................324
Display message............................250
Important safety notes..................322
Jump starting.................................326
Belt force limiter
Activation......................................... 59
Function ...........................................59
Blind SpotAssist
Activating/deactivating.................228
Display message............................254
Notes/function..............................207
see Active Blind Spot Assist
Bottle holder......................................285
Brake fluid
Display message............................240
Notes.............................................376
Brake lamps
Display message............................246
Brakes
ABS..................................................66
BAS..................................................67
BAS PLUS........................................67
Brake fluid (notes).........................376
Display message............................238
Driving tips....................................172
High-performance brake system....173
Important safety notes..................172
Maintenance..................................173
Index5

Headlamps
Adding fluidtocleaning system.....309
Cleaning system (function)............120
Cleaning system (notes)................378
Fogging up.....................................122
see Automatic headlamp mode
Head restraints
Adjusting.......................................100
Adjusting (electrically)...................101
Adjusting (rear)..............................101
Installing/removing (rear)..............102
Luxury ............................................ 101
Heating
see Climate control
High-beam headlamps
Display message............................246
Switching Adaptive Highbeam
Assist on/off.................................122
Switching on/off...........................119
Hill start assist..................................150
HOLD function
Display message............................252
Function/notes.............................186
Hood
Closing ...........................................307
Display message............................261
Important safety notes..................306
Opening.........................................306
Hydroplaning.....................................174
I
Ignitionlock
see Key positions
Immobilizer..........................................73
Indicator lamps
see Warning and indicator lamps
Instrument cluster
Overview .................................. 31, 219
Settings.........................................229
Warning and indicator
lamps .......................................32, 264
Instrument cluster lighting..............230
Interior lighting.................................123
Automatic control..........................123
Delayedswitch-off (on-board
computer)......................................232
Emergency lighting........................124
Manual control ............................... 124
Overview........................................123
Reading lamp.................................123
Setting the brightness of the
ambient lighting (on-board
computer)......................................231
Setting the brightness of the
display/switch (on-board
computer)......................................230
Setting the color of the ambient
lighting (on-board computer).........231
J
Jack
Storage location............................320
Using.............................................359
Jump starting (engine)......................326
K
KEYLESS-GO
Convenience closing feature............90
Display message............................262
Locking............................................77
Start/Stop button .......................... 147
Starting the engine........................149
Unlocking ......................................... 77
Keypositions
KEYLESS-GO..................................147
SmartKey.......................................147
Kickdown
Driving tips....................................159
Manual drive program....................163
Kneebag..............................................45
L
Lamps
see Warning and indicator lamps
Lane KeepingAssist
Activating/deactivating.................229
Display message............................253
Function/information....................209
Lane Tracking package.....................207
Lap time (RACETIMER)......................235
LATCH-type (ISOFIX) child seat
anchors................................................63
Index11

Light function, active
Display message............................247
Lights
Activating/deactivating the
interiorlighting delayed switch-off.232
Active light function.......................121
Automatic headlamp mode............117
Cornering light function.................121
Driving abroad...............................116
Hazard warning lamps...................120
High beamflasher .......................... 120
High-beam headlamps...................119
Lightswitch...................................116
Low-beam headlamps....................118
Parking lamps................................118
Setting the brightness of the
ambient lighting (on-board
computer)......................................231
Setting the brightness of the
display/switch (on-board
computer)......................................230
Setting the color of the ambient
lighting (on-board computer).........231
Standing lamps..............................119
Switching the daytime running
lamps on/off (on-board
computer)......................................230
Switching the exteriorlighting
delayed switch-off on/off (on-
board computer)............................231
Switching the surround lighting
on/off (on-board computer)..........231
Turn signals...................................119
see Changing bulbs
see Interior lighting
Light sensor (display message).......247
Loading guidelines............................278
Locking
see Centrallocking
Locking (doors)
Automatic........................................83
Emergency locking ........................... 84
From inside(central locking
button).............................................83
Locking centrally
see Centrallocking
Locking verification signal (on-
board computer)...............................232
Low-beam headlamps
Display message............................245
Setting for driving abroad
(symmetrical).................................116
Switching on/off...........................118
Lumbar support
Adjusting the 4-way lumbar
support..........................................103
Luxury head restraints.....................101
M
M+S tires............................................ 336
Malfunction message
see Display messages
Massagefunction (PULSE)...............103
Matte finish (cleaning
instructions)......................................313
mbrace
Call priority....................................294
Display message............................241
Downloading destinations
(COMAND).....................................294
Downloading routes.......................298
Emergency call..............................291
Geo fencing...................................298
Important safety notes..................290
Locatingastolen vehicle...............297
MB info call button........................293
Remote vehicle locking..................296
Roadside Assistance button..........293
Search&Send...............................295
Self-test.........................................291
Speed alert....................................298
System..........................................291
Triggering the vehicle alarm ........... 299
Vehicle remote malfunction
diagnosis.......................................297
Vehicle remote unlocking..............296
Mechanical key
Function/notes ................................ 78
Locking vehicle................................84
Unlocking the driver's door..............84
Memory card (audio).........................225
Memory function...............................112
Message memory (on-board
computer)..........................................237
12Index

Warning and indicator lamps
FunctionPage
ESP®269
SPORT handling
mode in AMG vehicles270
Distance warning275
$ ESP®OFF269
!
Turn signals119
Brakes (USA only)266
%
Brakes (Canada only)266
ABS267
SRS272
\nCheck Engine273
Tire pressure monitor276
FunctionPage
Seat belt265
ESP®in AMG vehicles270
Coolant273
High-beam
headlamps119
Low-beam
headlamps118
Parking lamps118
This lamp has no
function
Reserve fuel273
32Instrument cluster
At ag lance

Automaticanti-glaremirrors
The rear-view mirror and theexteriormirror
on thedriver'sside automatically go intoanti-
glaremodeifthefollowingconditionsare met
simultaneously:
Rthe ignition is switched on and
Rincident light from headlamps strikes the
sensor in the rear-view mirror.
The mirrors do not go into anti-glare mode if
reverse gear is engaged or if the interior
lighting is switched on.
Parking position for the exterior
mirror on the front-passenger side
Setting and storing the parking position
Using reverse gear
Button for the driver's side exterior mirror
Button for the front-passenger side
exterior mirror
$Adjustment button
!Memory buttonM
You can position the front-passenger side
exterior mirror in suchaway that you can see
the rear wheel on that side as soon as you
engage reverse gear. You can store this
position.
XPark the vehicle and turn the SmartKey to
position2in the ignition lock
(Ypage 147).
XPress buttonfor the exterior mirror on
the front-passenger side.
XEngage reverse gear.
The exterior mirror on the front-passenger
side moves to the preset parking position.
XUse adjustmentbutton$to adjust the
exterior mirror toaposition that allows you
to see the rear wheel and the curb.
The parking position is stored.
iIf you shift the transmission to another
position, the exterior mirror on the front-
passenger side returnstothe driving
position.
Using the memorybutton
Button for the driver's side exterior mirror
Button for the front-passenger side
exterior mirror
$Adjustment button
!Memory buttonM
You can position the front-passenger side
exterior mirror in suchaway that you can see
the rear wheel on that side as soon as you
engage reverse gear. This setting can be
stored using memory buttonM!.
XTurn the SmartKey to position2in the
ignition lock (Ypage 147).
XWith the exterior mirror on the front-
passenger side activated, use adjustment
button$to adjust the exterior mirror. In
the exterior mirror, the rear wheel and the
curb should be visible.
Mirrors111
Seats, steering wheel and mirrors
Z

Useful information
iThis Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are
possible. Please notethat your vehicle may
not be equipped with all features
described. This also applies to safety-
related systemsand functions.
iRead the information on qualified
specialist workshops: (Ypage 26).
Exterior lighting
Generalnotes
For reasonsofsafety, Mercedes-Benz
recommends that you drive with the lights
switched on even during the daytime.
Therefore, your vehicle is equipped with
special daytime running lamps. In some
countries, operation of the headlamps varies
due to legal requirements and self-imposed
obligations.
If you wish to drive during the daytime without
lights, switchoff the daytime running lamps
function in the on-board computer
(Ypage 230).
Driving abroad
Symmetrical low-beam headlamps
Switchthe headlamps to symmetrical low
beam in countries in which traffic drives on
the opposite side of the road from the country
where the vehicle is registered. This prevents
glare to oncoming traffic. When using
symmetrical lights, the edge of the road is not
lit as widely and as far ahead as normal.
Have the headlamps converted ataqualified
specialist workshop as close to the border as
possible before drivinginthesecountries.
Asymmetrical low beam
Have the headlamps converted back to
asymmetrical low-beam headlamps at a
qualified specialist workshop as soon as
possible after crossing the border again.
Setting the exterior lighting
Setting options
Exterior lightingcan be set using:
Rthe light switch
Rthe combination switch(Ypage 119)
Rthe on-board computer (Ypage 230)
Light switch
Operation

Left-handstanding lamps
\nRight-hand standing lamps
Parkinglamps, licenseplate and
instrumentclusterlighting
\rAutomatic headlamp mode,
controlled by the light sensor
Low-beam/high-beam headlamps
If you hearawarningtonewhen you leave the
vehicle, the lightsmay still be switched on.
XTurn the light switchto\r.
116Exterior lighting
Light sa nd windshield wipers

The exterior lighting (except the parking/
standinglamps) switches off automatically if
you:
Rremove the SmartKey from the ignition lock
Ropen the driver's door with the SmartKey
in position0.
Automatic headlampmode
GWARNING
When the light switch is set to\r,the low-
beam headlamps may not be switched on
automatically if there is fog, snow or other
causes of poor visibility due to the weather
conditions such as spray. There isarisk of an
accident.
In such situations, turn the light switch to
.
The automatic headlamp feature is only an
aid. The driver is responsible for the vehicle's
lighting at all times.

Left-hand standinglamps
\nRight-hand standinglamps
Parking lamps, license plate and
instrument cluster lighting
\rAutomatic headlamp mode,
controlled by the light sensor
Low-beam/high-beam headlamps
\ris the favored light switch setting. The
light setting is automatically selected
accordingtothe brightness of the ambient
light (exception: poor visibility due to weather
conditions such as fog, snow or spray):
RSmartKey in position1in the ignition lock:
the parking lamps are switched on or off
automatically depending on the brightness
of the ambient light.
RWith the engine running: if you have
activated the daytime runninglamps
function via the on-board computer,the
daytime runninglamps or the low-beam
headlamps and parking lamps are switched
on or off automatically depending on the
brightness of the ambient light.
XTo switch on automatic headlamp
mode:turn the light switch to\r.
Only for Canada:
The daytime runninglamps improve the
visibility of your vehicle during the day. The
daytime runninglamps function is required by
law in Canada. It cannot therefore be
deactivated.
When the engine is runningand the vehicle is
stationary: if you move the selector lever from
adrive position toP,the daytime running
lamps/low-beam headlamps go out after
three minutes.
When the engine is running, the vehicle is
stationary and in high ambient light: if you
turn the light switch to,the daytime
runninglamps and parking lamps switch on.
If the engine is runningand you turn the light
switch to,the manual settings take
precedenceover the daytime runninglamps.
USA only:
The daytime runninglamps improve the
visibility of your vehicle during the day. To do
this, the daytime runninglamps function must
be switched on using the on-board computer
(Ypage 230).
If the engine is runningand you turn the light
switch toor,the manual settings
Exterior lighting117
Lights and windshield wipers
Z

take precedence overthe daytime running
lamps.
Low-beam headlamps
GWARNING
When the lightswitchisset to\r,thelow-
beam headlampsmay not be switchedon
automatically if there is fog, snow or other
causes of poor visibility due to theweather
conditions such as spray. Thereisarisk of an
accident.
In such situations, turnthe light switch to
.

Left-hand standing lamps
\nRight-hand standing lamps
Parking lamps, license plate and
instrumentcluster lighting
\rAutomatic headlamp mode,
controlled by the light sensor
Low-beam/high-beam headlamps
Even if the light sensor does not detect that
it is dark,the parking lamps and low-beam
headlamps switchonwhen the ignition is
switched on and the light switchisset to the
position. This isaparticularly useful
function in the eventofrain and fog.
XTo switch on thelow-beam headlamps:
turnthe SmartKey in the ignition lock to
position2or start the engine.
XTurn the light switchto.
The greenindicator lamp in the
instrumentcluster lightsup.
Parking lamps
!If the battery has been excessively
discharged, the parking lamps or standing
lamps are automatically switched off to
enable the nextengine start. Alwayspark
your vehiclesafelyand sufficiently lit
according to legalstandards.Avoid the
continuoususe of theparking lamps
for severalhours.Ifpossible, switch on the
\nright or theleft standinglamp.

Left-hand standinglamps
\nRight-hand standinglamps
Parking lamps, license plate and
instrument cluster lighting
\rAutomatic headlamp mode,
controlled by the light sensor
Low-beam/high-beam headlamps
XTo switch on:turn the light switch to
.
The greenindicator lamp in the
instrument cluster lights up.
118Exterior lighting
Lights and windshiel dw ipers

Standing lamps

Left-hand standing lamps
\nRight-hand standing lamps
Parking lamps, license plate and
instrumentcluster lighting
\rAutomatic headlamp mode,
controlled by the light sensor
Low-beam/high-beam headlamps
Switchingonthe standinglamps ensuresthe
corresponding side of thevehicle is
illuminated.
XTo switch on thestanding lamps:the
SmartKey is notintheignition lockoritis
in position0.
XTurn thelight switch to(left-handside
of thevehicle)or\n(right-hand side of
thevehicle).
Combination switch
Turn signal
High-beam headlamps
Turn signal, right
$High-beam flasher
!Turn signal, left
XTo indicatebriefly:pressthecombination
switch briefly to thepressure pointinthe
direction of arrowor!.
The corresponding turn signal flashes three
times.
XTo indicate:press the combination switch
beyond the pressure point in the direction
of arrowor!.
High-beam headlamps
High-beam headlamps
Turn signal, right
$High-beam flasher
!Turn signal, left
XTo switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position2or start the engine.
XTurn the light switch toor\r.
XPress the combination switch beyond the
pressure point in the direction of
arrow.
In the\rposition, the high-beam
headlamps are only switched on when it is
dark and the engine is running.
Exterior lighting119
Lights and windshield wipers
Z

The blueindicator lamp in the
instrument cluster lights up when the high-
beam headlamps are switched on.
XTo switch off the high-beam
headlamps:move the combination switch
back to its normal position.
The blueindicator lamp in the
instrument cluster goes out.
iVehicles with Adaptive Highbeam Assist:
when Adaptive Highbeam Assist is active,
it controls activation of the high-beam
headlamps (Ypage 121).
High-beam flasher
High-beam headlamps
Turn signal, right
$High-beam flasher
!Turn signal, left
XTo switch on:turn the SmartKey in the
ignition lock to position1or2,orstart the
engine.
XPull the combination switch in the direction
of arrow$.
Hazard warning lamps
XTo switch on the hazard warning lamps:
press button.
All turn signals flash. If you now switch on
aturn signal using the combination switch,
only the turn signal lamp on the
corresponding side of the vehicle will flash.
XTo switch off the hazard warning
lamps:press button.
The hazard warning lamps automatically
switch on if:
Ran air bag is deployed
Rthe vehicle decelerates rapidly from a
speed of more than 45 mph (70 km/h) and
comes toastandstill
The hazard warning lamps switch off
automatically if the vehicle reachesaspeed
of over6mph (10 km/h) again afterafull
brake application.
iThe hazard warning lamps still operate if
the ignition is switched off.
Headlampcleaning system
The headlamps are cleaned automatically if
the "Wipe with washer fluid" function is
operated five times (Ypage 125)while the
lightsare on and the engineisrunning. When
you switchoff the ignition, the automatic
headlamp cleaning systemisreset and
counting is resumed from 0.
120Exterior lighting
Lights and windshield wipers