display MERCEDES-BENZ E CLASS 2019 Repair Manual

RActive Distance AssistDISTRONIC(→page177)
NOTEEngine damageduetoexcessivelyhigh engine speeds
The engine will be damaged ifyou drive withthe engine intheoverrevvingrange.
Do not drive with the engine intheover‐revvingrange.
The fuel supply is interruptedtoprotecttheengine whenthered mark ontachometer3(overrevvingrange) isreached.
During normal operating conditions, coolanttemperature display4mayrisetotheredmark.
\nWARNINGDanger of burns when open‐ingthe hood
Ifyou openthe hood whenthe engine hasoverheated or during afireinthe enginecompartment,you could come into contactwith hotgases orother escaping operatingfluids.
Before openingthe hood, allowtheenginetocool down.
Intheevent of afireinthe engine com‐partment,keepthe hood closed andcallthefireservice.
Vehicles with a 48 V on-board electrical sys‐tem (EQ Boosttechnology)
1POWER showsthe electric drive support
2CHARGE showstherecuperation power ofthe electric motor

Thefollowing display content can be selected intheClassicandSportdesigns:
RTachometer
RNavigation
RECO display
RConsumption
RG-Meter
Thefollowing content can be selected inthePro-gressivedesign:
RDate
RNavigation
RECO display
RConsumption
RG-Meter
Overview of displaysonthe multifunctiondisplay
1Outsidetemperature
2Drive program
3Transmission position
4Time
5Display section
Vehicles with an Instrument Display intheWidescreen Cockpit:the position ofthe displayswill differ fromthose displayedhere.
Further displaysonthe multifunction display:

Adjusting the instrument lighting
Turnbrightness control1up or down.The lighting ofthe Instrument Display and inthe control elements ofthevehicle interior isadjusted.
Menus and submenus
Functions onthe service menu ofthe on-board computer
On-board computer:
Service
Toselectthe function:swipe upwards ordownwards onthe left-handTouch Control.
Pressthe left-handTouch Control.
Functions ontheServicemenu:
RMessage memory (→page 427)
RTires:
-Restartthe tire pressure losswarningsystem (→page 392)
-Checkthe tire pressure withthe tire pres‐sure monitor (→page 390)
-Restartthe tire pressure monitor(→page 391)
RASSYST PLUS: calls upthe service due date(→page 347)
RVehicles with aWidescreen Cockpit:Cool-ant: coolanttemperature display
REngine Oil Level: engine oil level
Calling upthe Assistance Graphic
On-board computer:
Assistance
Vehicles withthe Instrument Display intheWidescreen Cockpit:whenyou havethe design settoProgressive,you can viewthe Assistance Graphic inthe left-hand areaofthe Instrument Display.
Thefollowing displaysareavailable onthe Assis‐tance Graphic menu:
RAssistance Graphic
RAttention level (→page 209)
Toswitch betweenthe displays:swipeupwards or downwards onthe left-handTouch Control.
224Instrument Display and on-board computer

Status displaysonthe assistant display:
R

Example:standard display
1Trip distance
2Total distance
Vehicles without a 48 V on-board electricalsystem (EQ Boosttechnology):
Example: trip computer
1Total distance
2Driving time
3Average speed
4Average fuel consumption
Vehicles with a 48 V on-board electrical sys‐tem (EQ Boosttechnology):
Example: trip computer
1Total distance
2Driving time
3Driving time withlow emissions
4Average speed
5Average fuel consumption
6Distance covered with low emissions
226Instrument Display and on-board computer

Resettingvalues onthe trip menu ofthe on-board computer
On-board computer:
Trip
The spelling onthe main menu displayedmay differ.Therefore, observethe menuoverviewforthe Instrument Display(→page 221).
You canresetthevalues ofthefollowing func‐tions:
RTrip distance
RTrip computerFrom StartandFrom Reset
RECO display(→page146)
Toselectthe functiontobereset:swipeupwards or downwards onthe left-handTouch Control.
Pressthe left-handTouch Control.
SelectYes.
Pressthe left-handTouch Control.
Ifyou press and holdthe left-handTouch Con‐trol,thevalues ofthe function will beresetimmediately.
Calling up navigation instructions onthe on-board computer
On-board computer:
Navigation
Example: nochange of direction announced
1Distancetothe next destination
2Estimated arrival time
3Distancetothe nextchange of direction
4Currentroad
Example:change of direction announced
1Roadtowhichthechange of direction leads
2Distancetothechange of direction
3Change-of-direction symbol
4Recommended lane and new lane during achange of direction (white)
5Possible lane
6Lane notrecommended (darkgray)
Further possible displaysontheNavigationmenu:
RDirection of Travel: display of direction oftravel androad currently being traveled on.
Instrument Display and on-board computer227

RNew Route...orCalculating Route...: a newroute is calculated.
RRoad Not Mapped:theroad is unknown, e.g.for newly builtroads.
RNo Route: noroute could be calculatedtothe selected destination.
ROff Map:the mapforthe current location isnotavailable.
RArea of Destination Reached:you havereachedthe area of destination.
RK:you havereachedthe destination or anintermediate destination.
Toexitthe menu:pressthe back button onthe left.Vehicles withthe COMAND multimedia sys‐tem:You can alsostart navigationtoone oftherecent destinations ontheNavigationmenu:
Pressthe left-handTouch Control.
Toselect a destination:swipe upwards ordownwards onthe left-handTouch Control.
Pressthe left-handTouch Control.Route guidance isstarted.
Ifroute guidance has already been activated,arequest will appear asking whetheryouwishtoendthe currentroute guidance.
SelectYes.
Pressthe left-handTouch Control.Route guidance isstarted.
Selectingradiostations usingthe on-boardcomputer
On-board computer:
Radio
1Frequencyrange
2Station
3Name of track
4Name of artist
Whenyou select astation fromthe memory pre‐sets,the preset will appear nexttothestationname. Whenyou select a savedstation inthefrequencyrange, an asterisk will appear nexttothestation name.
228Instrument Display and on-board computer

Toselect aradiostation:swipe upwards ordownwards onthe left-handTouch Control.
Selectingthe frequencyrange or memorypreset
Pressthe left-handTouch Control.
Swipe upwards or downwards onthe left-handTouch Control.
Pressthe left-handTouch Control.
Media playbackusingthe on-boardcomputer
On-board computer:
Media
1Media source
2Track number and current track
3Name of artist (example)
4Name of album
Tochange trackson an active mediasource:swipe upwards or downwards ontheleft-handTouch Control.
Changing a media source
Pressthe left-handTouch Control.
Toselect a media source:swipe upwardsor downwards onthe left-handTouch Con‐trol.
Pressthe left-handTouch Control.
Dialingtelephone numbers usingthe on-board computer
\nWARNINGRisk of distraction from infor‐mation systems and communicationsequipment
Ifyou operate information and communica‐tion equipment integrated inthevehiclewhen driving,you will be distracted fromthetraffic situation. This could also causeyoutolose control ofthevehicle.
Only operatethis equipment whenthetraffic situation permits.
Ifyou cannot be sure ofthis,stopthevehicle whilst paying attentiontoroad
Instrument Display and on-board computer229

and traffic conditions and operatetheequipment withthevehiclestationary.
Whentelephoning,you must observethe legalrequirementsforthe countryin whichyou arecurrently driving.
Requirements:RThe mobile phone is connectedtothe multi‐media system.
On-board computer:
Phone
Vehicles withthe COMAND multimedia sys‐tem:The mostrecenttelephone calls (dialed,received and missed calls) are displayed onthePhonemenu.
Toselect an entry:swipe upwards or down‐wards onthe left-handTouch Control.
Pressthe left-handTouch Control.Ifthere is only onetelephone numbersavedtoan entry:thetelephone numberwill be selected.
Ifthere are multipletelephone numberssavedtoan entry:swipe upwards or down‐
wards onthe left-handtouch controltoselectthe desiredtelephone number.
Pressthe left-handTouch Control.Thetelephone number will be dialed.
Thefollowing displaysmay appear instead ofthetelephone numbers dialed:
RPlease Wait...:the application isstarting. If a
Bluetooth®connectiontothe mobile phoneis not established,the menufor authorizingand connecting a mobile phone will be dis‐played onthe multimedia system(→page 298).
RUpdating data...:the call list is being upda‐ted.
RImporting Contacts...: contacts are beingimported fromthe mobile phone or astoragemedium.
Accepting/rejecting a callVehicles with Head-up Display:whenyoureceivea call,theIncoming Callmessage willappear onthe Head-up Display.
Swipe upwards or downwards onthe left-handTouch Control and selecta(Accept)orv(Reject).
Pressthe left-handTouch Control.
You may accept/rejectthe call using buttonaorvonthesteering wheel.
Adjusting the Head-up Displaysettings onthe on-boardcomputer
On-board computer:
HUD
Thefollowing Head-up Display settings can beadjusted:
RPosition
RBrightness
RDisplay Content
Toselect a setting:swipe upwards or down‐wards onthe left-handTouch Control.
Pressthe left-handTouch Control.
Toadjust avalue:swipe upwards or down‐wards onthe left-handTouch Control.
230Instrument Display and on-board computer

Pressthe left-handTouch Control.
1Setting currently selected
2Digital speedometer
3Traffic Sign Assist
4Navigation displays
Head-up Display
Function ofthe Head-up Display
Mercedes-AMGvehicles:be suretoobservethe information inthe Supplement. Otherwise,you may notrecognize dangers.
The Head-up Display projects intothe driver'sfield of vision:
RInformation fromthe navigation system
RInformation fromthe driver assistance sys‐tems
RSomewarning messages
Display elements
1Navigation messages
2Current speed
3Detected instructions and traffic signs
4Set speed inthe driver assistance system(e.g. cruise control)
Whenyoureceivea call,theaIncoming Callmessage will appear onthe Head-up Display.
In audio mode,thestation name or track will beshowntemporarily whenthe audio source isbeing actively operated.
Instrument Display and on-board computer231