display MERCEDES-BENZ E-CLASS CABRIOLET 2010 Owner's Guide

Vehicles with manual transmission
X
Shift to eithe rfirst or reverse gear R.
X Turn the key to position 0in the ignition
lock and remove it.
The immobiliser is activated.
X Apply the parkin gbrake firmly.
Vehicles with automati ctransmission X
Shift the transmission to position P.
With the key
X Turn the key to position 0in the ignition
lock and remove it.
The immo biliserisa ctivated.
X Apply the parking brake firmly.
i Thek ey can only be removed if the trans-
mission is in position P.
Usin gKEYLESS -GO
X Press the Start/Sto pbutton (Y page 135).
The engine stop sand al lthe indicator
lamps in the instrument cluster go out.
X Apply the parkin gbrake firmly.
i Thee ngine can be turne doff whil ethe
vehicle is in mot ionb ypress inga nd holding
the Start/Sto pbutton for thre eseconds. EC
Os tart/sto pfunction
Gen eral notes i
TheE CO start/stop function is only avail-
abl efor the E200 CG IBlueEFFICIENCY
model with manu altransmission.
The ECO start/sto pfunction switches the
engine off automatically in certain situations.
The engine starts automatically whe nyou pull
away again.
The ECO star t/stopfunction thereby helps
you to reduce the fuel consumption and emis-
sions of your vehicle. The ECO start/stop function is activated each
time the engine is switched on. The system is
operational when ECO symbol
:is shown in
the multifunction display.
! Always switch the ignition off and take the
key with you when leaving the vehicle.
Automatic engin eswitch-off The ECO start/stop function switche
soff the
engine automatically if you:
R apply th ebrake and bring th evehicle to a
standstill
R operat ethe clutc hpedal R
engage neutral N(follow gearshif tinstruc-
tion ;to engage neutral N,ifnecessary)
R release the clutch pedal
The engine is only switched off if:
R the outside temperature is within the range
which is suitabl efor the system.
R the engin eisatnormal operatin gtemper-
ature.
R the set temperature for the vehicle interior
has been reached. 138
DrivingDriving and parking
BA 20
7ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 138

Problem Possible causes/consequences and
M Solutions
Vehicles with
apetrol
engine:
The engine is not run-
ning smoothly and is
misfiring. There is
amalfunction in the engine electronics or amechanical
componen tofthe engin emanagement system.
X Only depress the accelerator pedal slightly.
X Have the cause rectified immediately at aqualified specialist
workshop.
Otherwise, non-combusted fuel may get into the catalytic con-
verter and damage it. The coolant tempera-
ture display is showing
more than 120 †. The
coolant warning lamp
may also be lit and a
warning tone may
sound. (Y
page 192). The coolant level is too low. The coolant is too hot and the engine
is no longer being cooled sufficiently.
X
Stop as soo naspossible and allow the engin eand the coolant
to cool down.
X Check the coolant level (Y page261). Observe the warning
notes as you do so and top up the coolan tifnecessary. If the coolan
tlevel is correc t,the radiator fan may be faulty. The
coolant is too hot and the engine is no longe rbeing cooled suffi-
cien tly.
X If the coolant temperature is less than 120 †, you can continue
driving to the nearest qualified specialist workshop.
X Avoid heavy loads on the engine as you do so, e.g. driving on
mountain roads and stop/start driving. Manual transmission
Gear lever
Gear lever
!
Whe nshifting between 5thand 6thgear,
you should always push the gear lever all
the way to the right. Otherwise, you could
shift uninte ntionally into 3rdor4th gear
and damage the transmission. Do not exceed the maximum speed for the
individual gears.
Shiftin
gdown at too high aspeed (trans-
mission braking) can cause the engine to
overrev ,leading to engine damage.
! On long and steep downhill gradients,
especiall yifthe vehicle is laden or towing
at railer, yo umust shift into gear 1, 2or3
in good time. This uses the engine's braking
effect .This relieves the load on the brake
system and prevents the brakes from over-
heating and wearing too quickly. Neutral
Nwhen the ECO start/stop
functio nisactive
In neutral N,the engin eisswitched off when
the vehicle speed is below acertain threshold
and the clut chpedal is not depressed. Manual transmission
141Driving and parking
BA 207ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version:3.0.2.11
2010-01-26T13:03:22+01:0
0-Seite 141 Z

For further information abou
tthe ECO start/
stop func tion (Y page 138). Engaging reverse gear
! Only engage reverse gear when the vehi-
cle is stationary, otherwise the transmis-
sion coul dbedamaged.
i The ECO start/stop function is not avail-
able when reverse gear is engaged.
More information about the ECO start/
stop function (Y page 138).
X Move the gear lever firmly to the left
beyond the point of resistance and then
forwards. Shift recommendation
The gearshift recommendations assis tyou in
adopting an economical drivin gstyle. The rec-
ommended gear is shown in the multifunction
display. X
Shift gear according to the gearshift rec-
ommendation :shown in the multifunc-
tion displa yofthe instrumen tcluster. Automatic transmission
Important safety notes
G
Risk of accident
The movemen tofthe pedals must not be
impaired in any way. Do not keep any objec ts in the driver's footwell. Make sure that floor-
mats or carpets are correctly secured and
that there is sufficient clearance for the ped-
als.
Do not place several floormats on top of one
another. G
Risk of accident
Do not change down for additional engine
braking on aslippery road surface. This could
cause the drive wheels to lose their grip and
the vehicle could skid. This could cause you
to lose control of your vehicle and cause an
accident. Selector lever
Overview of transmission positions Selector lever
P
Park position with selector lever lock
R Reverse
N Neutral
D Drive 142
Automatic transmissionDriving and parking
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa
Version: 3.0.2.11
2010-01-26T13:03:22+01:00
-Seite 142

Transmission position and driv
epro-
gram display :
Transmission positio ndisplay
; Drive program display (E/S)or(E/S/M)
The cur rent transmissio nposition and drive
program appear in the multifunction display. Transmission positions
B
Par
kposition
Prevent sthe ve hicle fr om rolling
away when stopped. Do not shift
the transmission int oposition P
unless the vehicle is stationary.
The key can only be removed if the
transmission is in position P.Ifthe
key is removed from the ignition
lock ,the selector lever is locked. C
Reverse
Only shift the transmission to
R
when the vehicle is stationary. A
Neu
tral
Do not shift the transmission to N
whil edriving. Otherwise, th eauto-
matic transmissio ncould be dam-
aged.
Releasing the brakes will allow you
to mov ethe vehicle freely, e.g. to
push it or tow it.
If ESP ®
is deactivated or faulty:
only shift the transmission to posi-
tion Nif the vehicle is in danger of
skidding, e.g. on icy roads. 7
Drive
The automatic transmission
changes gear automatically
.All
forward gears are available. Gearshifting
The automatic transmission shifts to the indi-
vidual gears automatically when it is in trans-
mission position D.This automatic gearshift-
ing behaviour is determined by:
R as hift range restric tion, if selected
R the selected drive program
E/S, E/S/M orM(Y page 144)
R the position of the accelerator pedal
R the roa dspeed Driving tips
Accelerator peda lposition Your style of drivin
ginfluences how the auto-
matic transmissio nshift sgear:
R littl ethrot tle: earl yupshifts
R mor ethrot tle: late upshifts
Double-clutch function E3
50 and E500 only: when shiftin gdown,
the double-clutch function is active regard-
less of the currently selected drive program.
The double-clutch function reduces load Automatic transmission
143Driving and parking
BA 20 7ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 143 Z

Steering wheel gearshif
tpaddles :
Left-hand steerin gwheel gearshift paddle
; Right-han dsteering whee lgearshif tpad-
dle
In the automatic drive program, you can
restric torderestrict the shift range by using
the steerin gwheel gearshift paddles or the
selector lever (Y page 145).
In the manua ldrive program, yo ucan change
gear using the steering wheel gearshift pad-
dles or the selector lever (Y page 145).
i You can only change gear with the steer-
ing wheel gearshift paddle swhen the trans-
mission is in position D.Automatic drive program
Drive program Eis characterised by the fol-
lowing:
R optimal fuel consumption resultin gfrom
th ea utomatic transmission shifting up
sooner
R the vehicle pulling away more gently in
forward and reverse gears, unless the
accelerator pedal is depressed fully
R increased sensitivity; this improves driving
stability on slippery road surfaces, for
example.
R the automatic transmission shifting up
sooner, which results in the vehicle being
driven at lower engine speeds and the
wheel sbeing less likely to spin Drive program
Sis characterised by the fol-
lowing:
R sporty engine and suspension configura-
tion
R the vehicle pulling away in first gear
R the automatic transmission shiftin gup
later
R the fuel consumption possibly being higher
as aresult of the later automatic transmis-
sion shift points Shif
tranges
Introduction When the automatic trans
mission is in posi-
tion D,itisp ossible to restric torderestrict
the shift range (Y page 145).
The shift range selected is shown in the mul-
tifunction display .The automatic transmis-
sion shift sonly as far as the selected gear. Driving situations
=
You can use the engi
ne'sbraking
effect. 5
To use the brakin
geffect of the
engine on do wnhill gradients and
for driving:
R on steep mounta inroads
R in mountainou sterrain
R in arduous conditions 4
To use the braking effect of the
engine on extremely steep downhill
gradients and long downhill
stretches
Restricting th
eshift range X
Press th eselector lever to the left towards
D– .
or
X Pull left -hand steering wheel gearshift pad-
dle.
The shift range is restricted. Automatic transmission
145Driving and parking
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version:3.0.2.11
2010-01-26T13:03:22+01:00
-Seite 145 Z

i
In order to preven tthe engin efrom over-
revving, th eautomatic transmission does
not shift down when the engine spee dis
too high.
i If the maximum engine speed for the shift
range is reached and you continue to accel-
erate, the automatic transmission shifts up
in order to prevent the engine from over-
revving, even if the shift range is restricted.
Derestricting the shift range X
Briefly press the selector lever to the right
towards D+.
or
X Pul lright-hand steering whee lgearshift
paddle.
The shift range is derestric ted.
Clearing the shif trang erestriction X
Press and hold the selector lever towards
D+ until Dis shown onc emore in the mul-
tifunction display.
or
X Pull and hold the right -hand steering wheel
gearshift paddle until Dis shown again in
the multifunction display.
The automatic transmissio nshift sfrom the
curre ntshif trange directly to D.
Selectin gthe ideal shift range X
Press th eselector lever to the left towards
D– and hold it in position.
or
X Pull the left -hand steering wheel gearshift
paddle and hold it in position.
The automatic transmissio nshift stot he
gear whic hallows ideal acceleration and
deceleration .Todothis, the automatic
transmission shift sdown one or more
gears. Manua
ldrive program
Switchin gonthe man ualdrive program Manual drive program
Mcan be selected
using the program selector button. You can
change gears using the steerin gwheel gear-
shift paddle sorthe selector lever in manual
drive program Mif the transmission is in posi-
tion D.The gear selected is shown in the mul-
tifunc tion display.
X Press the program selector button
(Y page 144) repeatedly until Mappears in
the multifunction display.
Upshifting X
Briefl ypres sthe selector lever to the right
towards D+.
or
X Pull the right-hand steering wheel gearshift
paddle (Y page 145).
The automatic transmission shift suptothe
nex tgear.
Downshifting X
Briefly press the selector lever to the left
towards D–.
or
X Pull the left-hand steerin gwheel gearshift
paddle (Y page 145).
The automatic transmission shift sdown to
the next gear.
i If you desire maximum acceleration ,push
the selector lever to the left or pull and hold
the left-hand steering wheel gearshift pad-
dle until the transmission shifts to the opti-
mal gear for the current speed. 146
Automatic transmissionDrivin
gand pa rking
BA 20 7ECE ÄJ 2010 /1a;1;2,e n-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 146

Kickdown
You can also use kickdown for maximum
acceleration in manual drive program
M.
X Depress th eaccele rator pedal beyond the
pressure point.
The tra nsmission shif tsto alower gear
depending on the engin espeed.
Switching off the manual drive program X
Vehicles without the dynamic handling
package with sport smode: press the
program selector button (Y page 144)
repeatedly until Eor Sappears in the mul-
tifunction display.
X Vehicles with the dynamic handling
pack agew ith sport smode: press the
program selector button (Y page 144).M
is no longer shown in the multifunction dis-
play. Automatic transmission
147Driving and parking
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 147 Z

engin
edamage and damage to the exhaust
system.
Do not use the following:
R marine diesel
R heating oil
R bio-diesel
R vegetable oil
R petrol
R paraffin
R kerosene
Do not mix these fuels with diese lfuels and
do not use any special additives. Other-
wise, this can lead to damage to the engine.
This excludes flow improver ,see "Low out-
side temperatures".
! When refuellin gusing afuel can, use afil-
ter or use aclean clot hasafilter. Other-
wise, particles from the fuel can may block
the fuel lines and/or the diesel injection
system.
For further information on "Fuel", see
(Y page 313).
Low outsid etemperatures Diesel fuel with improved cold flow qualities
is available during the winter months. In
Europe, various climate-dependent low-tem-
perature classes are defined in EN 590. Refu-
elling with diesel fuel which complies with the
climatic specification sofstandard EN 590
can hel ptoprevent operatin gproblems. At
exceptionall ylow tempera tures, it is possible
that the flow properties of the fuel ma ybe
inadequate. This is also the case for fuel that
has not been adapted to the climatic specifi-
cations ,e.g. diese lfuel for warmer areas.
i Further information about country-spe-
cific fuel properties can be obtained from
oil companies, e.g. at filling stations.
Flow improver Flow improvers can be added to improve the
cold resistance of diesel fuel. The effective- ness of
aflow improver is not guaranteed with
every fuel.
Correc tdosage and thorough mixing ar edeci-
sive factor sinensuring improvement in low-
temperature resistance. Under certain cir-
cumstances, an excessive dosage may
actually decreas elow-temperatur eresist-
anc eand should therefor ebeavoided. Follow
th em anufacturer's dosing instructions.
Mix the additive with the diese ling ood time,
befor ethe flo wproperties of th ediesel
become inadequate. Malfunction scan other-
wise only be rectified by heating the entire
fuel system, e.g. by parking the vehicle in a
heated garage.
Observe the information provided by the man-
ufacturer when using aflow improver. Only
use flow improvers that have been tested and
approved by Mercedes-Benz. You can obtain
further infor mation from any Mercedes-Benz
Servic eCentre. Refuelling
Fuel filler flap The fuel filler fla
pisunlocke dorlockedauto-
matically when you open or close the vehicle
with the key or using KEYLESS-GO.
The position of the fuel filler flap is to the rear
on the right. The position of the fuel filler cap
is displayed in the instrument cluster 8.
The arrow next to the filling pump indicates
the side of the vehicle. 150
RefuellingDrivin
gand pa rking
BA 20 7ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 150

:
To store the curren tspeed or ahigher
speed
; LIMi ndicator lamp
= To sto rethe curren tspeed or call up the
last stored speed
? To stor ethe curren tspeed or alower
speed
A To switc hbetween cruise control and var-
iable SPEEDTRONIC
B To deactivate cruise control
When you activate cruise control ,the stored
speed is shown in the multifunction display
for fiv eseconds. In the multifunction display,
the segments between the stored speed and
the maximu mspeed light up.
Selecting cruise control X
Check whether LI Mindicator lamp ;is off.
If it is off, cruise contro lisalready selected.
If it is not ,pres sthe cruise contr ol leverin
the direction of arrow A.
LIM indicator lamp ;in the cruise control
lever goe sout. Cruise contro lisselected.
Storing and maintaining the cur rent
speed You can stor
ethe curren tspeed if you are
drivin gfaster than 30 km/h. X
Accelerat ethe vehicle to the desired
speed.
X Briefly press the cruise contr ol lever
up : or down ?to the pressure point.
X Remove your foot from the accelerator
pedal.
Cruise contr ol is activated. The vehicle
automatically maintains the stored speed.
i Cruise contr ol maybeu nable to maintain
the sto reds peed on uphill gradien ts.T he
stored speed is resumed when the gradient
even sout. Cruise contro lmaintains the
stored speed on downhill gradients by
automatically applying the brakes.
i Vehicles with manual transmission:
R Always driv eatadequate, but no texces-
sive, engine speeds.
R Chang egearing oodt ime.
R If possible, do not change down several
gears at atime.
Storin gthe curre nt speedorc allingup
the last stored speed G
Risk of accident
Only call up astored spe ed ifyou know what
that spee disand if it is suitable for the current
traffic and driving situation. You can other-
wise endanger yourself or others by uninten-
tionally triggering sudden acceleration or
braking.
X Briefly pull the cruise control lever towards
you =.
X Remove your foot from the accelerator
pedal.
Th ef irst time cruise control is activated, it
stores the current speed or regulates the
speed of the vehicle to the previously
stored speed. Drivin
gsystems
159Drivingand pa rking
BA 20 7ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 159 Z

Setting
aspeed X
Press the cruise control lever to the pres-
sure point, up :for ahigher speed or
down ?fora lower speed.
X Keep the cruise contro llever pressed until
the desired speed is reached.
X Release the cruise control lever.
The new speed is stored.
i Cruise control is not deactivated if you
depress the accelerator pedal. For exam-
ple, if you accelerate briefly to over take,
cruise control adjusts the vehicle's speed
to the last speed stored after you have fin-
ished overtaking.
Making adjustments in 1km/h incre-
ments X
Briefly press the cruise contro llever to the
pressur epoint ,up :for ahigher speed or
down ?for alower speed.
The last speed stored is inc reased or
reduced.
Making adjustments in 10 km/h incre-
ments X
Briefly press the cruise contro llever
beyond the pressur epoint ,up :for a
higher spee dordown?for alower speed.
The last speed stored is inc reased or
reduced.
Deactivating cruise control There are several ways to deactivate cruise
control:
X Briefly press the cruise contro llever for-
wards B.
or
X Brake. or
X
Briefly press the cruise control lever in the
direc tion of arrow A.
Variable SPEEDTRONIC is selected. LIM
indicator lamp ;in the cruise contr ol lever
li ghts up.
Cruise control is automatically deactivated if:
R you depress the parkin gbrake
R yo ua re driving at less than 30 km/h
R ESP ®
intervenes or yo udeactiva teESP ®
R you change into neutral in avehicle with
manual transmission while driving or if the
clut chis depressed for longer than 6sec-
onds
R on vehicles with manual transmission ,you
shift to agear that is too high and as aresult
the engin espeed is too low
R on vehicles with automatic tra nsmission,
you shif tinto position Nwhil edriving
If cruise contro lisd eactiva ted, you will hear
aw arning tone. You will see the Cruise
contro loffmessage in th emultifunction
display for approximately five seconds.
i The last spee dstored is cleared when you
switch off the engine. DISTRONIC PLUS
Important safet ynotes i
DISTRONIC PLU Sisn ot available in all
coun tries.
DISTRONIC PLU Sregulates the speed and
automatically helps you maintain the dis-
tanc etot he vehicle detected in front. It
brakes automatically in orde rtoavoid
exceeding th eset speed.
On long and steep downhill gradien ts,e spe-
cially if the vehicle is laden or towing atrailer,
yo um ust select shift range 1,2or 3in good
time. By doing so, you will make use of the
brakin geffect of the engine ,which relieves
the load on the brake system and prevents 160
Driving systemsDriving and pa
rking
BA 20 7ECE ÄJ 2010 /1a;1;2,e n-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 160