display MERCEDES-BENZ E-CLASS CABRIOLET 2021 Manual PDF

#
Be prepa redto brake or swer veas nec-
essar y,prov ided the tra1c situation per-
mits and that it is safe totake evasive
action. Drive
Away Assist is only an aid. It is not a substi-
tute foryo ur attention tothe sur roundings. The
re sponsibility for safe manoeuvring and parking
re mains with you. Make sure that no persons, ani-
mals or objects etc. are in the manoeuvring
ra nge.
A risk of collision may occur in thefo llowing situa-
tions, forex ample:
R Ifth e accelerator and brake pedals are inter-
ch anged.
R If an inco rrect transmission position is
engaged.
Drive Away Assist is active under thefo llowing
conditions:
R IfPa rking Assist PARKTRONIC is activated.
R Ifyo u shiT the transmission position tok or
h when theve hicle is stationar y. R
Ifth e de tected obs tacle is less than appr ox.
1.0 m away.
R Ifth e manoeuvring assistance function is acti-
va ted in the multimedia system.
Syst
Syst em limits
em limits
The per form ance of Drive AwayAssist is limited
on inclines.
When driving with a trailer, Drive AwayAssist is
not available.
% Also obser vethe system limits of Parking
Assist PARKTRONIC (/ page 227).
F
F unction of Cr unction of Cr oss
ossTr
Tra1c
a1c Alert
Alert
% Cross Tra1c Ale rtis only available forve hicles
with Blind Spot Assist or Active Blind Spot
Assist.
Cross Tra1c Ale rtcan warndrivers of any cross-
ing tra1c when reve rsing and manoeuvring out of
a parking space. The radar sensors in the bumper
also monitor the area adjacent totheve hicle. If a
critical situation is de tected, theL symbol
appears in the media display and theve hicle can
be braked automaticall y. If
th era dar sensors are obstructed byvehicles or
ot her objects, de tection is not possible.
Depending on the countr y,Cross Tra1c Ale rtcan
be deactivated or activated in theManoeuvring
assistance menu (/page 237).
% Also obser vethe inst ructions on Blind Spot
Assist and Active Blind Spot Assist
(/ page 212).
Syst
Syst em limits
em limits
Cross Tra1c Ale rtis not available on inclines.
Cross Tra1c Ale rtis not available when driving
with a trailer.
Manoeuvr Manoeuvr ing br
ing brak
ake function
e function
The manoeuvring brake function can pr event colli-
sions with pedestrians when theve hicle is reve rs-
ing at slow speeds. If there ve rsing camera
de tects a person in theve hicle path, theve hicle
can be braked toa standstill.
The manoeuvring brake function can inter vene
under thefo llowing conditions:
R The vehicle is reve rsing at a speed slo werth an
10 km/h. 236
236
Driving and parking

Using
Tr
Using Trailer Manoeuvr
ailer Manoeuvr ing Assist
ing Assist #
Engage reve rsege ar k. #
Press but ton1.
The camera ima geis shown in the media dis-
pla y. #
Toadjust the articulation angle: select ¸.
Swipe leT or right on the media display or
to uchpad tochange the articulation angle. or #
Toactivate the straightening manoeuvre:
select º.
The system calculates the articulation angle in
such a wayth at the direction of the trailer at
th e time of activation is maintained. There is a
short countersteering mo vement of the trailer
while theve hicle is reve rsed, which then
guides it back tothe desired line. In this wa y,
th eve hicle is aligned st raight with the trailer
and, at the same time, the direction of the
trailer is maintained. #
Accelerate and brake as requ ired.
% The maximum articulation angle depends on
the length of the trailer. This is calculated by
th e system bydriving theve hicle forw ards,
including cornering. Before the length of the
trailer has been calcula ted, the maximum
articulation angle is appr oximately 23°. The
longer the trailer is, the higher the maximum
articulation angle (max. appr oximately 60°).
% Pay attention toyour sur roundings and be
re ady tobrake at all times. T T
r
railer hitch
ailer hitch N
No
ot
tes on tr
es on tr ailer oper
ailer oper ation
ation *
N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. Obser
vethefo llowing no tes on theto ngue weight:
R Do not use a tongue weight that exceeds or
fa lls below the permissible tongue weight
R Use a tongue weight as close as possible to
th e maximum tongue weight
Do not exceed thefo llowing values:
R Perm issible towing capacity
R Perm issible rear axle load of theto wing vehi-
cle
R Perm issible gross weight of theto wing vehicle
R Perm issible gross weight of the trailer
R Maximum permissible speed of the trailer Driving and parking
239
239

F
F
olding t
olding t he ball nec
he ball nec k out
k out #
Pull switch 2until the ball neck unloc ks.
The ball neck will fold out from under there ar
bumper.
Indicator lamp 1will 0ash. #
Pull the ball neck in the direction of the ar row
until it engages audibly in a vertical position.
Indicator lamp 1onthe ball neck release
switch will go out.
If th e ball neck is not securely loc ked in place,
th eTrailer coupling Check lockmessage will
appear on the inst rument displa y. #
Remo vethe co ver cap from the ball head and
store it in a safe place. Make sure
that the ball on the ball neck is clean.
Check that it is either greased or dry (g rease-
free), depending on the inst ructions forth e trailer.
F
F olding t olding t he ball nec
he ball nec k in
k in #
Pull switch 2until the ball neck unloc ks.
The ball neck will fold up under there ar
bumper.
Indicator lamp 1will 0ash. #
Push the ball neck in the direction of the
ar ro w until it engages audibly behind the
bumper.
Indicator lamp 1will go out and the message
on the inst rument display will disappear.
Obser vethe information about the displa yson the
inst rument cluster:
R Indicator and warning lamps (/ page 429)
R Display message s (/page 371) Driving and parking
241 241

#
Open the soc ket cap. #
Inse rtthe plug with lug 1ingroo ve 3 on
th e soc ket. #
Turn bayonet coupling 2totheright as far as
it will go. #
Let the cap engage. #
Secure the cable tothe trailer with cable ties
(only if you are using an adap ter cable). #
Make sure that the cable is alw ays slack for
ease of mo vement during cornering. Under
thefo llowing conditions, a message may
appear on the inst rument display even if the
trailer has been connec ted cor rectl y:
R LEDs ha vebeen ins talled in the trailer lighting
system.
R The cur rent has fallen below the trailer lighting
system's minimum cur rent (50 mA).
% Accessories can be connected tothe perma-
nent po wer supply up to180 W and tothe
po we r supply that is switched on via the igni-
tion loc k.
U
U ncoupling a tr
ncoupling a tr ailer
ailer &
W
WARNI NG
ARNI NGRisk of being crushed and
becoming trapped when uncoupling a
trailer
When uncoupling a trailer with an engaged
inertia-activated brake, your hand may
become trapped between theve hicle and the
trailer dr awbar. #
Do not uncouple trailers with an engaged
ove rrun brake. *
N NOOTE
TE Damage when uncoupling in a state
of ove rrun Uncoupling in a state of
overrun can damage
th eve hicle. #
Do not uncouple trailers with an engaged
ove rrun brake. &
W
WARNING
ARNING Risk of becoming trapped when
disconnecting the trailer cable
V
V ehicles wit
ehicles wit h lev
h level contr
el contr ol syst
ol system:
em:Thevehicle
may lo wer when the trailer cable is disconnec-
te d.
This could result in you or other people
becoming trapped if your or their limbs are
between theve hicle body and the tyres or
underneath theve hicle. #
Make sure that nobody is underneath the
ve hicle or in the immediate vicinity of the
wheel ar ches when you disconnect the
trailer cable. #
Secure the trailer against rolling away. Driving and parking
243
243

N
N
o
ot
tes on t
es on t he ins
he instrtrument displa
ument displa y and on-board
y and on-board
com
com put
puter
er &
W
WARNING
ARNING Risk of accident if the inst ru-
ment display fails
If th e inst rument display has failed or is mal-
functioning, function restrictions in systems
re leva nt tosaf ety cann otbe de tected.
The operating saf ety of your vehicle may be
impaired. #
Drive on carefull y. #
Have theve hicle checked immediately at
a qu ali/ed specialist workshop. &
W
W ARNING
ARNING Risk of distraction due toinfor-
mation systems and communications
equipment
If yo u operate information systems and com-
munications equipment integ rated in theve hi-
cle when driving, you could be distracted from
th e tra1c situation. This could also cause you
to lose control of theve hicle. #
Only operate this equipment when the
tra1c situation pe rmits. #
Ifyo u cannot be sure of this, stop the
ve hicle in accordance with the tra1c
conditions and operate the equipment
with theve hicle stationar y. *
N NO
OTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. Yo
u must obser vethe legal requ irements forthe
count ryin which you are cur rently driving when
ope rating the on-board computer.
The on-board computer sho wsonly display mes-
sages and warnings from speci/c systems on the
inst rument displa y.Yo u must therefore ensure
th at your vehicle is alw aysre liable.
If th e operating saf ety of your vehicle is impaired,
park theve hicle immediately and in accordance
with the tra1c conditions. Contact a quali/ed
specialist workshop. Instrument display and on-board computer
247
247

Ov
Ov
er
ervie
vie w of ins
w of ins tr
trument display
ument display 1
Speedome ter
The segments on the speedome ter indicate
th e statuses of thefo llowing systems: cruise
control/limiter/Active Distance Assist
DISTRONIC
2 Index points
3 Outside temp erature 4
Time
5 Area for additional values (e xample:rev coun-
te r): rev counter/navigation/ECO display/
consum ption/G-me ter/date
The fuel supply will be inter rupted toprotect
th e engine when there d mark on therev
counter (o verrev ving range) is reached.
6 Coolant temp erature display During normal operation,
the coolant temp er-
ature display is permitted torise to120°C.
Ve hicles with 48 V on-board elect rical system:
POWER and CHARGE displa ys(electrical drive
support and recuperation po wer of the elec-
tric mo tor)
7 Selected drive prog ram
8 Selected transmission position 248 248
Instrument display and on-board co
mputer

9
Centre display area of the inst rument display
(e xamp le: standard display for a trip): assis-
ta nce/telephone/navigation/trip/media/
ra dio/styles and displa ys/service/possible
settings for head-up display
A Fuel le vel and fuel /ller 0ap location indicator Ov
Ov
er
ervie
vie w of butt
w of butt ons on t
ons on the st
he steer
eering wheel
ing wheel
Depending on the equipment, the la yout and the
design of the control elements on the steering
wheel may di.er. 1
Control panel for cruise control/limiter or
Ac tive Distance Assist DISTRONIC
(/ page 193)
2 G Back button, on-boa rdcomputer
3 Touch Control, on-board computer
To navigate: swipe
To con/rm: press a
4 ò Main menu, on-board computer 5
ò Main menu, MBUX multimedia system
6 Touch Control, MBUX multimedia system
To navigate: swipe
To con/rm: press a
7 G Back button, MBUX multimedia system
8 Cont rol panel forth e MBUX multimedia sys-
tem
£ LINGU ATRO NIC
9 Toadjust the brightness of the inst rument
lighting Oper Oper
ating t
ating t he on-boar
he on-boar d com
d com put
puter
er
Obser vethe legal requ irements forth e country in
which you are cur rently driving when ope rating
th e on-board computer. Instrument display and on-board computer
249
249

The on-board computer is ope
rated using the leT-
hand Touch Control and the leT-hand back/home
button.
When the on-board computer is being operated,
di.erent acoustic signals will sound as operating
fe edbac k,e.g. when the end of a list is reached or
when you are scrolling thro ugh a list.
% Tooperate theTo uch Control in the most
e.ective way,use the tip of your thumb if pos-
sible.
The following menus are available:
R Assistance
R Telephone R
Navigation
R Trip
R Radio
R Media
R Service
R V
V ehicles wit ehicles with an ins h an instr
trument displa
ument displa y in t
y in the
he
widescr
widescr een coc
een coc kpit:
kpit:Design
% You can /nd information about the possible
settings and selections on the menus in the
Digital Owner's Manual.
The menus can be called up from the menu bar
on the inst rument displa y. #
T
T o call up t
o call up t he menu bar:
he menu bar: pressthe leT-hand
back button until the menu bar is displa yed.
% V
Vehicles wit
ehicles wit hout A
hout Activ
ctive Dist
e Dist ance Assis
ance Assist t
DIS
DIS TR
TRONIC:
ONIC: presstheò button tocall up
th e menu bar of the on-board computer. #
T
T o scr
o scr oll on t
oll on t he menu bar
he menu bar :
:swipe leT or right
on the leT-hand Touch Control. #
T
To call up a menu, submenu or possible se
o call up a menu, submenu or possible se t-
t-
tings on t
tings on t he menu, or
he menu, or con/rm
con/rma selection or
a selection or
se
se tting:
tting: press the leT-hand Touch Control. #
T
To scr
o scr oll t
oll thr
hrough display
ough display s or lis
s or lists on tts on the
he
menu, or select displa
menu, or select displa y cont
y content, a function,
ent, a function,
an entr
an entr y or a display
y or a display :
:swipe upwards or down-
wa rds on the leT-hand Touch Control. #
T
To e
o e xit a submenu:
xit a submenu: pressthe leT-hand back
button.
Selecting t
Selecting t he head-up display
he head-up display #
T
To switc
o switc h on t
h on t he head-up display
he head-up display :
:switch on
th e head-up display via the multimedia system
or activate it on the menu bar byswiping
upwards on the leT-hand Touch Control.
The head-up display menu will be selected on
th e head-up displa y. #
T To switc
o switc h t
h t o t
o t he head-up display
he head-up display :
:press the
leT-hand Touch Control or swipe upwards on
th e leT-hand Touch Control. #
T
To se
o se t t
t the t
he t hr
hree displa
ee displa y r
y rang
ang es of t
es of t he head-up
he head-up
display
display :
:swipe upwards or down wards on the
leT-hand Touch Control. 250
250
Instrument display and on-board computer

F
F
ull-scr
ull-scr een menus
een menus
Yo u can display thefo llowing menus full-screen on
th e inst rument displa y:
R Assistance
R Trip
R Navigation #
Onthe cor responding menu, use the leT-hand
To uch Control toscroll tothe end of the list. #
Press the leT-hand Touch Control.
The selected menu will be displa yed full-
screen. Ov
Ov
er
ervie
vie w of display
w of display s on t
s on the ins
he ins tr
trument display
ument display
Displa yson the inst rument displa y:
u Active Parking Assist activated
(/ page 233)
é Parking Assist PARKTRONIC deactivated
(/ page 230)
h Cruise control (/ page 192)
È Limiter (/ page 192) ç
Active Distance Assist DISTRONIC
(/ page 195)
ê Active Brake Assist (/ page 209)
à Active Steering Assist (/ page 203)
¬ Active Stop-and-Go Assist (/ page 202)
à Active Lane Keeping Assist (/ page 214)
è ECO start/s top function (/ page 161)
ë HOLD function (/ page 188)
_ Adaptive Highbeam Assist (/ page 130)
Ad aptive Highbeam Assist Plus
(/ page 131)
ð Maximum permissible speed exceeded (for
cer tain countries only)
V
V ehicles wit
ehicles wit h
hTr
Tra1c
a1c Sign Assist:
Sign Assist: detected instruc-
tions and tra1c signs (/ page 210).
Fo r an overview of the indicator and warning
lamps, see (/ page 429). Head-up display
Head-up display
F
F
unction of t
unction of t he head-up display
he head-up display *
N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. The head-up display projects
thefo llowing infor-
mation into the driver's /eld of vision abo vethe
cockpit, forex ample:
R The vehicle speed
R Information from the navigation system
R Information from the driving systems and driv-
ing saf ety sy stems
R Some warning messages
Depending on theve hicle's equipment, di.erent
content can be shown in theth re e areas of the
head-up displ ay (/page 252). Inst
rument display and on-board computer
251
251

Displa
Displa
y cont
y content
ent 1
Navigation instructions
2 Current speed
3 Detected instructions and tra1c signs
4 Set speed in the driving system (e.g. cruise
control)
Syst
Syst em limits
em limits
The visibility of the displa yswill be a.ected bythe
fo llowing conditions:
R Seat position
R Image position setting
R Light conditions R
Wetro ad sur face
R Objects on the display co ver
R Polarisation in sunglasses
% Inextreme sunlight, sections of the display
may appear washed out. You can cor rect this
by switching the head-up display o. and on
again. Se
Se
tting t
tting t he head-up displa
he head-up displa y using t
y using the on-board
he on-board
com
com put
puter
er On-board computer:
4 HEAD-UP DISPLAY
The following head-up display settings or displa ys
can be selected or shown:
R Position
R Brightness
R Messages
R Assis tance status
R Telephone
R Audio
R LINGU ATRO NIC #
T
To select t
o select t he Se
he Settings menu:
ttings menu: swipetotheright
on the leT-hand Touch Control.
The Settings menu 5will be selected. #
T
To call up t
o call up t he Se
he Settings menu:
ttings menu: pressthe leT-
hand Touch Control. #
T
To adjus
o adjust t t the position:
he position: swipe upwards or
down wards on the leT-hand Touch Control. #
T To adjus o adjust t t the br
he br ightness:
ightness: swipetothe leT or
ri ght on the leT-hand Touch Control.
Se
Se tting messag
tting messag es, assist
es, assistance st
ance st atus, t
atus, telephone,
elephone,
audio and LIN
audio and LIN GUA
GUATR
TRONIC
ONIC #
Press the leT-hand Touch Control.
The list of setting options will be displa yed. #
Swipe upwards or down wards on the leT-hand
To uch Control and select a setting bypressing
th e leT-hand Touch Control. 252
252
Instrument display and on-board computer