engine MERCEDES-BENZ E-CLASS COUPE 2009 User Guide

G
Risk of accident
If the 00C7 warning lamp in the instrument
cluster lights up whe nthe engine is running,
ESP ®
is deactivated or is unavailabl edueto a
malfunction. The ris kthat your vehicle may
star ttos kid then increase sincertain situa-
tions.
Alway sadapt your driving styl etothe prevail-
ing roa dand weathe rconditions.
X To activate: press button 0046.
The 00C7 warning lamp in the instrument
cluster goe sout. EBV (electroni
cbrake forc edistribu-
tion)
EBV monitors and control sthe brake pres-
sure on the rea rwheel stoi mprove driving
stability whe nbraking. G
Risk of accident
If EBV is malfunctioning ,the brake system is
stil lavailable with ful lbrake boosting effect.
However, the rea rwheel scan stil llock, e.g.
under ful lbraking. Thi scould cause yo uto
los econtrol of your vehicle and cause an acci-
dent. You shoul dtherefore adap tyou rd riving
styl etot he different handling characteristics. ADAPTIVE BRAKE
ADAPTIVE BRAKE enhances braking safety
and offers increased braking comfort. In addi-
tion to the braking function, ADAPTIVE BRAKE
also ha sthe HOLD function (Y page 135) and
hil lstar tassist( Ypage 100). For further
information, see Driving tips (Y page 191).PRE-SAFE
®
Brake (vehicle swithD IS-
TRONIC PLUS)*
PRE-SAFE ®
Brake can hel pyou to minimise
the ris kofafrontalcollision with avehicle ahea
dorr educe the effects of such acolli-
sion.
Thi sfunction will issue awarning at speeds of
around 30 km/h or more if:
R for aperiod of several seconds, the dis-
tance to the vehicle in front is too short for
the speed at which yo uare travelling. The
00BA distance warning lamp in the instru-
ment cluster lights up.
R yo ua re approaching the vehicle in front too
rapidly .Anintermittent warning tone
sounds and the 00BAdistance warning
lamp lights up in the instrument cluster.
Due to the nature of the system, particularly
complicated driving conditions may cause the
system to display an unnecessary warning. G
Risk of accident
Pa yp articula rattention to the traffi ccondi-
tions if the 00BAdistance warning lamp in the
instrument cluster lights up or an intermittent
warning tone sounds. If necessary, brake or
manoeuvre to avoid an obstacle.
If the driver and passengers have fastened
thei rseatb elts, PRE-SAFE ®
Brake can also
can also perform the following at speeds of
above approximately 30 km/h:
R brake the vehicle automaticall yfrom a
speed of up to approximately 200 km/h
R trigger preventative passenger protection
measures (PRE-SAFE ®
) G
Risk of accident
PRE-SAFE ®
Brake is only an ai dtoassist you
whe ndriving .You are responsibl efor main-
taining asafed istance from othe rvehicles,
the vehicle's speed and for braking in good
time .Alway spayattention to the traffi ccon-
ditions .Otherwise, yo umay recognise dan-
gers too late, cause an accident and injure
yoursel fand others.
With the hel pofthe radar senso rsystem,
PRE-SAFE ®
Brake can detect obstacles that
are in front of your vehicle for an extended 56
Drivin
gsafety systemsSafety
*optional
207_AKB
;2;3,en-GB
mkalafa ,V ersion: 2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 56

The braking action of PRE-SAFE
®
Brake is
ended automatically if:
R you manoeuvre to avoid the obstacle.
R you drive slower than approximately
15 km/h.
R there is no longer an obstacle detected in
frontofy our vehicle.
R there is no longer any danger of acollision.
Following acollision or crash-related damage
to the fronte nd of the vehicle, have the con-
figuration and operation of the radar sensors
checked. Choose aqualified specialist work-
shop for this which has the necessary spe-
cialist knowledge and tools for the work
required. Mercedes-Benz recommends that
you use aMercedes-Benz Servic eCentre for
this purpose. Anti-theft systems
Immobiliser
The immobiliser prevent syour vehicle from
being started without the correc tkey.
Activating the immobiliser X
With the key: remove the key from the
ignition lock.
X With KEYLESS GO*: press the start/stop
button on the dashboard.
The engine switches off.
Deactivating the immobiliser X
With the key: turn the key to position 2in
the ignition lock.
X With KEYLESS GO*: press the start/stop
button on the dashboard twice without
depressing the brake.
i The immobiliser is alway sdeactivated
when you start the engine. ATA* (anti-theft alarms
ystem)
Av isual and audibl ealarm is triggered when
the alarm system is primed and you open:
R ad oor
R ad oor or the boot lid with the emergency
key element
R the boot lid
R the bonnet
The alarm is not switched off even if you close
ad oor again. X
To prime: lock the vehicle using the key.
Vehicles with KEYLESS GO* can also be
locked by touchin gthe door handle on the
outside.
Indicator lamp 0046flashes. The alarm sys-
tem is primed after approximately 15 sec-
onds.
X To deactivate: unlock the vehicle using the
key. On vehicles with KEYLESS GO* ,you
can also unlock the vehicle by opening the
door/boot lid.
Deactivating the alarm X
With the key: insert the key into the igni-
tion lock.
The alarm is deactivated.
or
X Press the 0036or0037 button on the key.
The alarm is deactivated. 58
Anti-theft systemsSafety
*o
ptional
207_AKB; 2; 3, en-GB
mkalafa,
Version: 2.11.8.1 2009-07-23T10:23:49+02:00-Seite 58

X
To switc hoff:press and hol dbutton 0046for
abou t5second suntilyou hea rat one.
X To switc hon:press and hol dbutton 0047for
abou t5second suntilyou hea rat one. Locking/unlockin
gthe vehicle from
the inside
Yo uc an centrall yloc koru nlock the vehicle
from the inside. Thi sfeatur emaybe usefu lif,
for example, yo uwishtou nlock the front-
passenge rdoorfrom the insid eorlockt he
vehicl ebefore yo upulla way. G
Ris
kofa ccident
Do not leav echildren unsupervised in the
vehicle. The ycould open adoorfrom the
insid e–e venifiti sloc ked –and thereby
endanger themselves and others. X
To unlock: press button 0046.
X To lock: press button 0047. Boot
Points to remember
G
Ris
kofp oisoning
Exhaus tfum es could ente rthe vehicl einterior
if the engine is running and the boot li dis
open. Thi scould poison you. Therefore ,you
shoul dmakes uret hatthe boot li disalways
closed when the engine is running.
! The boot li dswing su pwar ds when
opened. Therefore ,makes uret hatther eis
sufficient clearance above the boot lid.
Do not leav ethe key in the boot. Yo ucould
otherwise lock yoursel fout.
The boot li dcan be:
R opene dand closed manually
(Y page 64)
R opene dautomaticall yfrom outside
(Y page 65)
R opene dautomaticall yfrom inside
(Y page 65) Opening/closing manually
X To open: press the 0036button on the key. X
Pull handle 0046. G
Ris
kofi njury
Make sure tha tnobod ycan become trapped
when closing the boot lid. 64
BootControls
207_AKB; 2; 3, en-GB
mkalafa,
Version: 2.11.8.1 2009-07-23T10:23:49+02:00-Seite 64

004B
Ignition (power supply for all consumers)
and drive position
004C To start the engine
i Even if the key is not for the vehicle in
question, it wills till turn in the ignition lock.
The ignition is not switched on. The engine
cannot be started. KEYLESS-GO*
Pressing the Start/Stop button repeatedly
corresponds to the different key positions in
the ignition lock. This requires that you do not
depres sthe brake pedal.
If you depres sthe brake pedala nd press the
Start/Stop button, the engine starts immedi-
ately. X
Position 0:ifStart/Stop button 0046has not
yet been pressed ,this corresponds to "key
removed".
X Position 1:press Start/Stop button 0046
once.
It is now possible to switch on the wind-
screen wipers, for example.
i If you open the driver's door in this posi-
tion, the powers upply is disconnected
again.
X Position 2(ignition): press Start/Stop but-
ton 0046twice. i
If you press Start/Stop button 0046in this
positio nonce and the driver's door is open,
the powers upply is disconnected again.
Removing the Start/Stop button You can remove the Start/Stop button from
the ignition lock and start the vehicle with a
key as usual.
i
You do not need to remove the Start/
Stop button from the ignition lock when you
leave the vehicle. X
Remove Start/Stop button 0046from ignition
lock 0047.
i When you insert the Start/Stop button
into the ignition lock, the system requires
2s econds recognition time before the
Start/Stop button can be used. Seats
Points to remember
You willf ind information aboutf olding the
rear bench seat forward sinthe "Through-
loading feature in the rear bench seat" sec-
tion (Coupé) (Y page 169).
Depending on the vehicle's equipment, the
seats can adjusted either manually/electri-
cally or electrically*. G
Risk of injury
The seats can still be adjusted when there is
no key in the ignition lock. For this reason, 66
SeatsControls
*o
ptional
207_AKB; 2; 3, en-GB
mkalafa
,V ersion: 2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 66

Seat-belt adjustment
The belt adjustment function adjusts the driv-
er's and front-passenger seat belt to the
upper body of the occupants. The belt strap
is tightened slightly when:
R you engage the belt tongue in the buckle
and then turn the key to position 2in the
ignition lock.
R the key is in position 2in the ignition lock
and you then engage the belt tongue in the
buckle once the seat-belt extender has
retracted.
The seat-belt adjustment will apply acertain
tightening force if any slack is detected
between the occupant and the belt sash. The
belt should not be held during the adjust-
ment.Y ou can switch the belt adjustment on
and off in the on-board computer
(Y page 121).
Unfastening the belt X
Press release button 0088and guide belt
tongue 0047back towards seat-belt
extender 0046. Belt warning for driver and front
passenger
The 0082 seat belt warning lamp in the instru-
ment cluster reminds you that all occupants
should fasten their seat belts. It is either lit
continuously or flashes. Additionally, there
may be awarning tone.
The 0082 seat belt warning lamp goes out and
the warning tone ceases as soon as the driver
and front passenger have fastened their seat
belts.
For certain countries only: regardless of
whether the driver or the front passenger
already have their seat belt fastened, the
0082 seat belt warning lamp lights up for six
seconds after the engine has been started. It
then goes out if both the driver and the front
passenger have fastened their seat belt. i
Further information about the 0082seat
belt warning lamp (Y page 236). Rear seat belt status indicator
The rear-compartment seat belt status indi-
cator tells you if the rear passengers have
their seat belts fastened. It indicates the rear
seat on which the belt is fastened.
The rear-compartment seat belt status indi-
cator appears in the multi-function display for
around 30 seconds if
R you set off and have reached aspeed of
approximately 10 km/h.
R the rear passengers fasten or unfasten
their seat belts while the vehicle is in
motion.
R someone gets in or out of the vehicle and
the vehicle drives away again. Example: the passenger in the right rear seat has
their seat belt fastened
You can also cancel the messages immedi-
ately (Y
page 208).
i The status indicator for the rear-compart-
ment seat belts is only available for certain
countries. Seat belts
79Controls
207_AKB; 2; 3, en-GB
mkalafa, Version: 2.11.8.1 2009-07-23T10:23:49+02:00-Seite 79 Z

tries
,ope ratio noft he headlamps varies due
to lega lrequirements and self-impose dobli-
gations. In these countries ,the daytime driv-
ing lights ar eautomaticall yswitched on when
the engine is started.
Th ee xterior lighting (excep tthe side lamp/
parking lamp) switches off automaticall yif
you:
R remove the key fro mthe ignition lock
R open the driver's door when the ignition is
switched off (ke yinposition 0in the igni-
tio nlock)
! Switch off the side lamps and parking
lamp when yo uleave the vehicle. This pre-
vents the battery fro mdischarging.
Informatio nabout drivin gabroad Converting to symmetrica
ldipped beam
when drivin gabroad: switch the headlamps
to symmetrical dipped beam in countries in
which traffi cdrives on the opposite side of the roa
dtot he country where the vehicl eisreg-
istered. This prevents oncoming traffi cfrom
being dazzled.
Have the headlamps converte dataqualified
specialis tworkshop ,e.g.aM ercedes-Benz
Service Centre, as close to the borde raspos-
sibl ebefor ed riving in these countries .Sym-
metrica llight sdon ot illuminate as large an
area of the edge of the carriageway.
Converting to asymmetrica ldipped beam
afte rreturning: have the headlamps conver-
ted back to asymmetrica ldippe dbeamata
qualifie dspecialis tworkshop ,e.g.a
Mercedes-Benz Service Centre, as soon as
possibl eafter crossing the borde rwhen
returning.
Vehicle swithI ntelligent Light System*: if
the headlamps ar econverte dtosymmetrical
dipped beam ,not al llight functions ar eavail-
able ."Mo torway mode" and the "extended
range foglamps "aredeactivated
(Y page 119). Operation
Light switch
004A
006F
Left-hand parking lamp 004B
0070
Right-hand parking lamp 004C
0027
Lights off/daytime driving
lights Operation
004D
0066
Automatic headlamp mode/
daytime driving lights 004E
006C
Sidelam ps,licence plate and
instrument lighting 004F
0064
Dipped-bea mheadlam ps/
main-bea mheadlam ps18 18
Youm usts witch on the dipped-beam headlamps befor eyou can switch on the main-bea mheadlam ps. Lights
81Controls
*optional
207_AKB; 2; 3, en-GB
mkalafa
,V ersion: 2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 81 Z

Operation
0050
0066
Frontfoglamps 19 0051
006A
Rear foglamp Combination switch
0070
0063
Main-beam headlamps 180071
0024
Right-han dturn signal 0072
Headlamp flasher
0073
0026
Left-hand turn signal Dipped-beam headlamps
X
Turn the ignition key to position 2in the
ignition lock or start the engine.
X To switch on: turn the light switch to
0064.
The 0064 indicator lamp in the instrument
cluster lights up.
Daytim edriving lights X
Activat ethe daytime driving lights function
via the on-board computer (Y page 119).
X To switch on: turn the light switch to
0027 or0066.
When the engine is on: depending on the
ambient light conditions, the daytime driv-
ing lights or the dipped-beam headlamps
are switched on.
When the dipped-beam headlamps are
switched on, the 0064indicator lamp in the
instrument cluster lights up.
Automatic headlamp mode G
Risk of accident
If the light switch is set to 0066,the lights will
not come on automatically if it is foggy. This
could endanger you and others .Therefore, turn the light switch to
0064in the dark or in
fog.
The automatic headlamp feature is only an
aid. The driver is responsible for the vehicle's
lighting at all times. G
Risk of accident
When it is dark or foggy, turn the light switch
from 0066 to0064 in good time. Otherwise,
the headlamps could switch off temporarily
and you could cause an accident.
X To switch on: turn the light switch to
0066.
Key in position 1in the ignition lock: the
side lamp is switched on or off automati-
cally depending on the brightness of the
ambient light.
When the engine is running: depending on
the ambient light conditions, the daytime
driving lights 20
or the dipped-beam head-
lamps (in addition to the side lamp) are
switched on or off automatically.
When the dipped-beam headlamps are
switched on, the 0064indicator lamp in the
instrument cluster lights up.
Foglamps (halogen headlamps) G
Risk of accident
If you suspect that driving conditions will be
foggy, turn the light switch to 0064before you
start your journey. Otherwise, your vehicle
may not be visible and you could endanger
yourself and others.
X Turn the key to position 2in the ignition
lock.
X To switch on: turn the light switch to
0064 or006C.Ift he light switch is set to
0066,y ou cannot switch on the foglamp.
19 Only vehicles with halogen headlamps are equipped with fron tfoglamps.
18 You must switch on the dipped-beam headlamps before you can switch on the main-beam headlamps.
20 If you have activated the "Daytime driving lights" function in the on-board computer. 82
LightsControls
207_AKB; 2; 3, en-GB
mkalafa,
Version:2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 82

X
Pull the light switch out to the first detent.
The green 0066indicator lamp in the instru-
ment cluster lights up.
X To switch off: press the light switch in as
far as it will go.
The green 0066indicator lamp in the instru-
ment cluster goes out.
Rear foglamp On vehicles with front foglamps
X
Turn the key to position 2in the ignition
lock.
X To switch on: turn the light switch to
0064 or006C.W hen the light switch is set
to 0066,y ou cannot switch on the rear fog-
lamp.
X Pull the light switch out to the secon dstop.
The yellow 006Aindicator lamp in the
instrument cluster lights up.
X To switch off: press the light switch in as
far as it will go.
The yellow 006Aindicator lamp in the
instrument cluster goes out.
On vehicles without front foglamps
X Turn the key to position 2in the ignition
lock.
X To switch on: turn the light switch to
0064.W hen the light switch is set to
0066,y ou cannot switch on the rear fog-
lamp.
X Pull the light switch out to the stop.
The yellow 006Aindicator lamp in the
instrument cluster lights up.
X To switch off: press the light switch in as
far as it will go.
The yellow 006Aindicator lamp in the
instrument cluster goes out.
Manua lmain-beam headlamps X
Turn the ignition key to position 2in the
ignition lock or start the engine.
X To switch on: turn the light switch to
0064. X
Press the combination switch beyond the
pressure point in the direction of arrow
0070 (Ypage 82).
The 0063 indicator lamp in the instrument
cluster lights up.
X To deactivate: move the combination
switch back to its normal position.
The 0063 indicator lamp in the instrument
cluster goes out.
Adaptive Highbeam Assist* You can use this function to set the head-
lamps to change between dipped-beam and
main-beam automatically. The system recog-
nises vehicles with their lights on, either
approaching from the opposite direction or
travelling in frontofy
our vehicle, and conse-
quently switches the headlamps from main
beam to dipped beam.
The system automatically adapts the dipped-
beam headlamp range depending on the dis-
tancetot he other vehicle. When the system
no longer detect sany other vehicles it acti-
vates the main-beam headlamps again.
The optical sensor for the system is behind
the windscreen in the overhead control panel
area. Lights
83Controls
*optional
207_AKB; 2; 3, en-GB
mkalafa,
Version: 2.11.8.1 2009-07-23T10:23:49+02:00-Seite 83 Z

Not active:
if youaredrivin gatspeeds above
70 km/h or switch off the indicator lamp or
tur nthe steering whee ltothe straight-ahead
position.
Th ec ornering light functio nmayremai nlitfor
as hort time ,but is automaticall yswitched off
after no mor ethant hre em inutes.
Motorway mode Motorway mod
eincrease sthe range of the
beam.
Active:
R if yo uaredrivin gatspeeds above
110 km/h and do not make any large steer-
ing movements for 1000 m.
R if yo uaredrivin gatspeeds above
130 km/h.
Motorway mod eremains active as long as
your spee dis80km/h or higher.
Not active: once your spee ddrops below
80 km/h.
Extended rang efoglam ps Th
ee xtende drange foglamps reduce the
glar eexperience dbythe driver and improve
the illumination of the edge of the carriage-
way.
Active: if youaredrivin gatspeeds below
70 km/h and yo uswitch on the rea rfoglamp.
If your spee ddoesn ot exceed 100 km/h, the
extende dfoglamp functio nremains active.
Not active: if youaredrivin gatspeeds above
100 km/h or yo uswitch off the rea rfoglamp.
Adjusting the headlamp rang e(ha logen
headlamps) Headlam
prange control
005D Driver' sseata nd front-passenge rseat
occupied
004A Driver' sseat, front-passenge rseata nd
rea rseats occupied
004B Driver' sseat, front-passenge rseata nd
rea rseats occupied ,boo tladen
004C Driver' sand front-passenge rseats occu-
pied and maximum permissibl ereara xle
load utilised, e.g .whent owing atrailer
Th eh eadlam prange contro lallow syou to
adjus tthe cone of light fro mthe headlamps
to suit the vehicl eload.
X Star tthe engine.
X Turn the headlamp range contro ltothe cor-
responding position. 86
LightsControls
207_AKB; 2; 3, en-GB
mkalafa
,V ersion: 2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 86

Operation
004E
0064
Dipped-beam headlamps/
main-beam headlamps 210087
006A
Rear foglamp 006E
0066
Foglamps 22 Combination switch
006F
0063
Main-beam headlamps 210070
0024
Right-han dturn signal 0071
Headlamp flasher
0072
0026
Left-hand turn signal Dipped-beam headlamps
X
Turn the ignition key to position 2in the
ignition lock or start the engine.
X To switch on: turn the light switch to
0064.
The 0064 indicator lamp in the instrument
cluster lights up.
Daytim edriving lights X
Activat ethe daytime driving lights function
via the on-board computer (Y page 119).
X To switch on: turn the light switch to
0066.
When the engine is on: depending on the
ambient light conditions, the daytime driv-
ing lights or the dipped-beam headlamps
are switched on.
When the dipped-beam headlamps are
switched on, the 0064indicator lamp in the
instrument cluster lights up. Automatic headlamp mode G
Risk of accident
If the light switch is set to 0066,the lights will
not come on automatically if it is foggy. This
could endanger you and others .Therefore,
turn the light switch to 0064in the dark or in
fog.
The automatic headlamp feature is only an
aid. The driver is responsible for the vehicle's
lighting at all times.
X To switch on: turn the light switch to
0066.
Key in position 1in the ignition lock: the
side lamp is switched on or off automati-
cally depending on the brightness of the
ambient light.
When the engine is running: depending on
the ambient light conditions, the daytime
driving lights 23
or the dipped-beam head-
lamps (in addition to the side lamp) are
switched on or off automatically.
When the dipped-beam headlamps are
switched on, the 0064indicator lamp in the
instrument cluster lights up.
Front foglamps Only vehicles with fron
tfoglamps have the
"Foglamps" function. G
Risk of accident
If you suspect that driving conditions will be
foggy, turn the light switch to 0064before you
start your journey. Otherwise, your vehicle
may not be visible and you could endanger
yourself and others.
i If you switch the engine off (key in posi-
tion 1int he ignition lock) and then restart
it, the previous foglamp settings are
restored.
21 You must switch on the dipped-beam headlamps before you can switch on the main-beam headlamps.
22 Only vehicles with fron tfoglamps have the "Foglamps" function.
23 If you have activated the "Daytime driving lights" function in the on-board computer. 88
LightsControls
207_AKB; 2; 3, en-GB
mkalafa,
Version:2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 88