heating MERCEDES-BENZ E-CLASS COUPE 2021 User Guide

A
A
djus
djus ting t
ting t he AIRSC
he AIRSC ARF v
ARF vents
ents &
W
WARNING
ARNING Risk of burns caused bythe
heating output from AIRSCARF being too
high
When AIRSCARF is switched on, very hot air
can 0ow from the outlet opening in the head
re straints. #
Turn the heating output down in good
time. #
Maintain a suitable distance from the
outlet opening. *
N
NO OTE
TE Damage caused toAIRSCARF by
th e use of pr otective co vers If a pr
otective co ver is placed overth e front
seat head restraints, the 0ow of air from the
AIRSCARF vent is hindered.
This can cause AIRSCARF toove rheat and be
damaged. #
Do not use pr otective co vers on head
re straints wi thAIRSCARF. Make sure
that no objects are co vering the air
inlet grille on the back of the head restraints. #
You can adjust the blo wer setting of AIR-
SCARF vents 1using the AIRSCARF button
(/ page 108). #
You can adjust the height of AIRSCARF vents
1 and the cur rent of air byadjusting the
height of the head restraints (/ page 102). Climate control
153
153

S
S
t
tar
ar ting t
ting t he v
he vehicle wit
ehicle wit h t
h the ke
he key in t
y in t he mark
he mark ed
ed
space (emerg
space (emerg ency oper
ency operation mode)
ation mode)
If th eve hicle does not start and thePlace the
key in the marked space See Owner's Manual
message appears in the inst rument displa y,you
can start theve hicle in emer gency ope ration
mode. #
Make sure that the mar ked space 2is
em pty. #
Remo vetheke y1 from theke yring. #
Place theke y1 inthe mar ked space 2.
The vehicle will start aTer a short time. When
youre mo vetheke y1 from the mar ked
space 2,theve hicle can be driven. For fur-
th er engine starts ho wever,theke y1 must
be located in the mar ked space 2during the
entire journe y. #
Have theke y1 checked at a quali/ed spe-
cialist workshop.
If t If t he v
he v ehicle does no
ehicle does no t st
t start:
art: #
Place theke y1 inthe mar ked space 2and
lea veitth ere. #
Depress the brake pedal and start theve hicle
using the start/s top button.
% You can switch on the po wer supply or the
ve hicle with the start/s top button.
Obser veany information rega rding display mes-
sages that can be displ ayed on the inst rument
displa y. S
S
t
tar
ar ting t
ting t he v
he vehicle via R
ehicle via R emot
emote Online Ser
e Online Ser vices
vices Cooling or heating t
Cooling or heating t
he v
he vehicle int
ehicle int er
erior bef
ior bef ore
ore
st
st ar
ar ting t
ting t he jour
he jour ney
ney
Ensu rethefo llowing before starting the engine:
R The legal stipulations in the area where your
ve hicle is par ked allow engine starting via
smartphone.
R It is safe tostart and runth e engine where
yo ur vehicle is par ked.
R The fuel tank is su1cient lyfull.
R The star ter battery is su1ciently charge d.
Char
Char ging t
ging t he st
he start
arter batt
er batt er
ery bef
y bef or
ore st
e st ar
arting t
ting t he
he
jour
jour ney
ney
Yo u can receive a message on your smartphone
when the state of charge ofthe star ter battery is
lo w. You can then start theve hicle with the smart-
phone tocharge the batter y.The vehicle is auto-
matically switched o. aTer ten minutes.
Ensure thefo llowing before starting the engine:
R The legal stipulations in the area where your
ve hicle is par ked allow engine starting via
smartphone. 156
156
Driving and parking

&
W
WARNI NG
ARNI NGRisk of skidding and of an acci-
dent due toshiTing down on slippe ryroad
sur faces
If yo u shiT down on slippery road sur faces to
increase the engine braking e.ect, the drive
wheels may lose traction. #
Do not shiT down on slippery road sur fa-
ces toincrease the engine braking
e.ect. &
D
DAN
AN GER
GER Risk of fatal injury due topoison-
ous exhaust gases
If th eta ilpipe is bloc ked or su1cient ventila-
tion is not possible, poisonous exhaust gases
such as carbon monoxide may enter theve hi-
cle. This is the case if theve hicle gets stuck in
sno w,forex ample. #
Keep theta ilpipe and the area around
th eve hicle free from snow when the
ve hicle or the stationary heater is run-
ning. #
Open a wind owonthe side of theve hicle
fa cing away from the wind toensure an
adequate supply of fresh air. &
W
WARNING
ARNING Risk of accident due tothe
brake system overheating
If yo u lea veyour foot on the brake pedal when
driving, the brake system may overheat.
This increases the braking distance and the
brake system can even fail. #
Never use the brake pedal as a foot re st. #
Do not depress the brake pedal and the
accelerator pedal at the same time while
driving. *
N
NOOTE
TE Engine damage due toexcessively
high engine speeds The engine will be damaged if
you drive with
th e engine in theove rrev ving range. #
Do not drive with the engine in theove r-
re vving range. *
N
NOOTE
TE Causing wearto the brake linings by
permanently depressing the brake pedal #
Do not permanently depress the brake
pedal while driving. #
Touse braking e.ect of the engine, shiT
to a lo werge ar in good time. *
N
NOOTE
TE Damage tothe driv etra in and
engine when pulling away #
Do not warm upthe engine while the
ve hicle is stationar y.Pull away immedi-
atel y. #
Avoid high engine speeds and driving at
full thro ttle until the engine has reached
its operating temp erature. *
N
NOOTE
TE Damage tothe catalytic con verter
due tonon-combusted fuel The engine is not
running smoo thly and is mis-
/ring.
Non-combus ted fuel may getinto the catalytic
con verter. 160 160
Driving and parking

#
Toavo id creating ano ther electrostatic
ch arge , do not get into theve hicle again
during there fuelling process. &
W
W ARNING
ARNING Risk of /re from fuel mixture
Ve hicles with a diesel engine:
If yo u mix diesel fuel with petrol, the 0ash
point of the fuel mixture is lo werth an that of
pure diesel fuel.
While theve hicle is running, component parts
in theex haust system may overheat without
wa rning. #
Neverre fuel using petrol. #
Never mix petrol with diesel fuel. *
N
NO OTE TE Damage caused bythe wrong fuel Ve
hicles with a petrol engine:
Even small amounts of the wrong fuel could
re sult in damage tothe fuel system, the
engine and the emission control system. #
Only refuel using unleaded, sulphur-free
spar k-ignition engine fuel that conforms to
European EN 228, or an equivalent
speci/cation.
Fu el of this speci/cation may contain up to
10% ethanol. Your vehicle is suitable for use
with E10 fuel.
Ne verre fuel wi thone of thefo llowing fuels:
R Diesel
R Regular petrol with an octane number
lo we rth an 91 RON
R Petrol with more than 10% ethanol byvol-
ume, e.g. E15, E20, E85, E100
R Petrol with more than 3% me thanol byvol-
ume, e.g. M15, M30
R Petrol with additives containing me tal
If yo u ha veacciden tally refuelled wi th the
wrong fuel: #
Do not switch on theve hicle. #
Consult a quali/ed specialist workshop. *
N NOOTE
TE Damage caused bythe wrong fuel Ve
hicles with a diesel engine:
Even small amounts of the wrong fuel could
re sult in damage tothe fuel system, the
engine and the emission control system. #
Only refuel using sulphu r-free diesel fuel
th at conforms toEuropean standard
EN 590, or an equivalent speci/cation.
In count ries without sulphur-free diesel
fuel, refuel using only lo w-sulphur diesel
fuel with a sulphur content less than
50 ppm.
Ne verre fuel wi thone of thefo llowing fuels:
R Petrol
R Marine diesel
R Heating oil
R Pure bio-diesel or vege table oil
R Para1n or kerosene
If yo u ha veacciden tally refuelled wi th the
wrong fuel: Driving and parking
173
173

R
IfAc tive Steering Assist is activated and active
(/ page 204).
R Ifth e time has been set incor rectl y.
R Ifyo uch ange lanes and vary your speed fre-
qu ently in active driving situations.
The ATTENTION ASSIST dr owsiness or alertness
assessment is reset and restar ted when continu-
ing the journey in thefo llowing situations:
R You switch o. theve hicle.
R Ifyo u unfasten your seat belt and open the
driver's door (e.g. tochange drivers or take a
break).
Se
Se tting A
tting A TTENTION ASSIST
TTENTION ASSIST
Multimedia system:
4 © 5
Settings 5
Assistance
5 Attention Assist
Se
Se tting op
tting op tions
tions #
Select Standard, SensitiveorOff.
Sugg Sugg es esting a rting a r es
est art ar ea
ea #
Select Suggest rest area. #
Activate or deactivate the function.
If AT TENTION ASSIST de tects fatigue or
increasing lack of attention, it suggests a rest
area in the vicinity. #
Select the suggested rest area.
Yo u are guided tothe selected rest area. Cr
Cr
uise contr
uise control and limit ol and limit er
er F
F
unction of cr
unction of cr uise contr
uise controlol
Cruise control regula testh e speed totheva lue
selected bythe driver.
If yo u accelerate toove rtake, forex ample, the
stored speed is not dele ted. If youre mo veyour
fo ot from the accelerator pedal aTer overtaking,
cruise cont rol will resume speed regulation back
to the stored speed.
Yo u can store any speed abo ve20 km/h up tothe
maximum design speed or up tothe set winter
tyre limit.
Obser vethe no tes on driving systems and your
re sponsibility; you may otherwise failto recognise
dangers (/ page 184). Mer
Mer cedes‑ cedes‑ AMG v
AMG vehicles:
ehicles: cruise cont rol is availa-
ble up toa maximum speed of 250 km/h.
Displ ay
Display s in t
s in the Ins
he Instr trument Display
ument Display
R h (gre y): cruise control is selected but not
yet activated.
R h (gre en): cruise control is active.
A stored speed appears along with theh dis-
pla y.
% The segments extending from the cur rent
stored speed tothe end of the scale, or tothe
set winter tyre limit, light up in the speedome-
te r.
Syst
Syst em limits
em limits
Cruise control may be unable tomaintain the
stored speed on uphill gradients. The stored
speed is resumed when thegr adient evens out.
Change into a lo werge ar in good time on long and
steep downhill gradients. Take particular no teof
th is when driving a laden vehicle. By doing so, you
will make use of the engine's braking e.ect. This
re lie vesth e load on the brake system and pre-
ve nts the brakes from overheating and wearing
to oqu ickl y. Driving and parking
193
193

#
Ensure there is su1cient ground clear-
ance between the underbody and the
guide rails of the car wash. #
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is su1cient. To
avo id damage toyour vehicle when using a car
wa sh, ensu rethefo llowing beforehand:
R Active Distance Assist DISTRONIC is deactiva-
te d.
R The HOLD function is switched o..
R The 360° Camera or there ve rsing camera is
switched o..
R The side windo wsand sliding sunroof are com-
ple tely closed.
R The blo werfo rth eve ntilation and heating is
switched o..
R The windsc reen wiper switch is in position g.
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise the boot lid could
open unintentionall y.
R For car washes with a con veyor system: -
Neutral iis engaged.
- Ifyo uwo uld like tolea vetheve hicle while
it is being washed, make sure theke y is
located in theve hicle. The park position
j isotherwise automatically engaged.
% If, aTer the car wash, youre mo vethewax
from the windscreen and wiper rubbers, this
will pr event smearing and reduce wiper noise. Inf
Inf
or
ormation on using a high-pr
mation on using a high-pr essur
essure cleaner
e cleaner &
W
WARNING
ARNING Risk of an accident when using
high-pressure cleaners with round-spr ay
nozzles
The water jet can cause extern ally invisible
damage.
Components damaged in this wa y may un ex-
pectedly fail. #
Do not use a high-pressure cleaner with
round-spr aynozzles. #
Have damaged tyres or chassis parts
re placed immediatel y. To
avo id damage toyour vehicle, obser vethefo l-
lowing when using a high-pressure cleaner:
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise the boot lid could
open unintentionall y.
R Maintain a distance of at least 30 cm tothe
ve hicle.
R V Vehicles wit
ehicles with decor h decorativ
ative f
e f oil:
oil: Parts of your
ve hicle are co vered with a decorative foil.
Maintain a distance of at least 70 cm between
th efo il-co vered parts of theve hicle and the
nozzle of the high-pressure cleaner. Mo vethe
high-pressure cleaner nozzle around whilst
cleaning. The waterte mp erature of the high-
pressure cleaner must not exceed 60°C.
R Obser vethe information on the cor rect dis-
ta nce in the equipment manufacturer's oper-
ating inst ructions.
R Do not direct the nozzle of the high-pressure
cleaner directly at sensitive parts, such as
tyres, gaps, electrical components, batteries,
light sources and ventilation slits. 310 310
Maintenance and ca
re

T
T
r
railer hitch
ailer hitch
R Obser vethe no tes on care in the trailer hitch
manufacturer's operator manual.
R Do not clean the ball neck with a high-pres-
sure cleaner or sol vent.
R Remo vetraces of rust on the ball, forex ample,
with a wire brush.
R Remo vedirt with a lint-free clo th.
R ATer cleaning, lightly oil or grease the ball
head.
% Before using trailers with anti-torsional cou-
pling, obser vethe manufacturer's operator
manual. N
No
ot
tes on car
es on car e of t
e of the int
he int er
erior
ior &
W WARNING
ARNING Risk of injury from plastic parts
breaking o. aTer the use of sol vent-based
ca re products
Care and cleaning products containing sol-
ve nts can cause sur faces in the cockpit to
become porous. When the airbags are
deplo yed, plastic parts may break away. #
Do not use any care or cleaning products
containing sol vents toclean the cockpit. &
W WARNING
ARNING Risk of injury or fatal injuries
from bleached seat belts
Bleaching or dyeing seat belts can se verely
we aken them.
This can, forex ample, cause seat belts to tear
or fail in an accident. #
Never bleach or dye seat belts. To
avo id damage totheve hicle, obser vethefo l-
lowing no tes on cleaning and care:
Seat belts Seat belts R Clean with luk ewarmand soapy water.
R Do not use chemical cleaning agents.
R Do not dry byheating them toove r 80°C or
ex posing them todirect sunlight.
Display
Display
R Switch o. the display and let it cool down. R
Clean the sur face carefully with a micro/bre
clo thand a suitable displ aycare product (TFT-
LC D).
R Do not use any other agents.
Head-up displ ay
Head-up display
R Clean with a soT, non-static, lint-free clo th.
R Do not use cleaning agents.
Plas Plastic tr tic tr im
im
R Clean with a damp micro/bre clo th.
R For heavy soiling: Use a cleaner recommen-
ded for Mercedes-Benz.
R Do not attach stic kers, /lms or similar materi-
als.
R Do not allow cosmetics, insect repellent or
sun cream tocome in contact with the plastic
trim.
R
R eal w
eal w ood and tr
ood and tr im elements
im elements
R Clean with a micro/bre clo th.
R Blackpiano-lacquer look: Clean with a damp
clo thand soapy water.
R For heavy soiling: Use a cleaner recommen-
ded for Mercedes-Benz. 314
314
Maintenance and care

At
a dis tance of app roximately 1 m tothe tyre
in0ation compressor and appr oximately 1.6 m
abo vethegr ound, thefo llowing sound pres-
sure le vels appl y:
R Emission sound pressure le vel L
PA 83 dB
(A)
R Sound po wer le vel L
WA 91 dB (A)
The tyre in0ation compressor is maintenance-
free. If there is a malfunction, please contact
a qu ali/ed specialist workshop. Using t Using t
he TIREFIT kit
he TIREFIT kit R
R
eq
eq uir
uir ements:
ements:
R Tyre sealant bottle and tyre in0ation compres-
sor (/ page 319)
R TIREFIT stic ker
R Gloves
Yo u can use TIREFIT tyre sealant toseal per fora-
tion damage of up to4 mm, particular lythose in
th e tyre contact sur face. You can use TIREFIT in
outside temp eratures down to-20 °C. &
W
WARNING
ARNING Risk of accident when using
tyre sealant
The tyre sealant may be unable toseal the
tyre proper ly, especially in thefo llowing cases:
R there are lar gecuts or punctures in the
tyre (la rger than damage pr eviously men-
tioned)
R the wheel rims ha vebeen damaged
R aTer journe yswith very low tyre pressure
or with 0at tyres #
Do not continue driving. #
Consult a quali/ed specialist workshop. &
W
WARNING
ARNING Risk of injury and poisoning
from tyre sealant
Ty re sealant is hazardous tohealth and causes
ir rita tion. Do not allow it tocome into contact
with your skin, eyes or clo thing, and do not
swallow it. Do not inhale any vapours. Keep
th e tyre sealant away from children. Obser
vethefo llowing if you come into contact
with the tyre sealant: #
Rinse o. the tyre sealant from your skin
using water immediatel y. #
If tyre sealant gets into your eyes, thor-
oughly rinse them using clean water
immediatel y. #
If tyre sealant has been swallo wed,thor-
oughly rinse out your mouth immediately
and drink plenty of water. Do not induce
vo miting and seek medical attention
immediatel y. #
Change out of clo thing which has come
into contact with tyre sealant immedi-
atel y. #
If an alle rgic reaction occurs, seek medi-
cal attention immediatel y. *
N NO
OTE
TE Overheating due tothe tyre in0ation
compressor running too long #
Do not runth e tyre in0ation compressor
fo r longer than ten minutes without inter-
ru ption. 320 320
Breakdown assistance

Inf
Inf
or
ormation on fuel q
mation on fuel q uality f
uality for v
or vehicles wit
ehicles wit h a die-
h a die-
sel engine
sel engine
Gener Gener al not
al notes
es
Obser vethe no tes on operating 0uids
(/ page 359). &
W
WARNING
ARNING Risk of /re from fuel mixtu re
If yo u mix diesel fuel with petrol, the 0ash
point of the fuel mixture is lo werth an that of
pure diesel fuel. #
Neverre fuel using petrol in diesel
engines. #
Never mix petrol with diesel fuel. *
N
NOOTE
TE Damage caused bythe wrong fuel Even small amounts of
the wrong fuel could
re sult in damage tothe fuel system, the
engine and the emission control system. #
V
Vehicles wit
ehicles wit h a diesel par
h a diesel par ticulat
ticulate
e /lt
/lt er:
er:
Only refuel using sulphur-free diesel fuel th
at conforms toEuropean standard
EN 590, or an equivalent speci/cation.
In count ries without sulphur-free diesel
fuel, refuel using only lo w-sulphur diesel
fuel with a sulphur content less than
50 ppm.
Ne verre fuel wi thone of thefo llowing fuels:
R Petrol
R Marine diesel
R Heating oil
R Pure fatty acid me thyl ester (bio-diesel) or
ve ge table oil
R Para1n or kerosene
If yo u ha veacciden tally refuelled wi th the
wrong fuel: #
Do not switch on theve hicle. #
Consult a quali/ed specialist workshop. The
following compatibility indication for fuel
applies toyour vehicle: 1
For diesel fuel with a maximum of 7% byvol-
ume bio-diesel (fatty acid me thyl ester)
Ac cording toEuropean standard EN 16942 you
can /nd the compatibility indications at thefo l-
lowing locations:
R Ontheve hicle on the information label on the
fuel /ller 0ap (/ page 172)
R Onthe fuel dispenser or pump nozzle suitable
fo ryo ur vehicle thro ughout Europe
Inf Inf or
ormation on lo
mation on lo w outside t
w outside tem
emper
per atur
atur es
es
Re fuel your vehicle with as much winter diesel fuel
as possible at the beginning of winter. 362
362
Te
ch nical data

-
Athttps://be vo.mercedes-benz.com
- Inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop *
N
NO OTE
TE Overheating at high outside tempe r-
atures If an inappropriate coolant is used,
the engine
cooling system is not su1ciently pr otected
against overheating and cor rosion at high out-
side temp eratures. #
Only use coolant appr ovedby Mercedes-
Benz. #
Obser vethe inst ructions in the
Mercedes-Benz Speci/cations for Oper-
ating Fluids 320.1. Ha
ve the coolant regula rly re placed at a quali/ed
specialist workshop.
Proportion of antif reeze concentrate in the engine
cooling system:
R A minimum of 50% (antifreeze pr otection down
to about -37°C) R
A maximum of 55% (antif reeze pr otection
down to-45°C) N
No
ot
tes on windscr
es on windscr een w
een washer
asher 0uid
0uid Obser
vethe no tes on operating 0uids
(/ page 359). &
W
W ARNING
ARNING ‑ Risk of /re and injury due to
windscreen washer concent rate
Wi ndsc reen washer concent rate is highly 0am-
mable. It could ignite if it comes into contact
with hot engine component parts or the
ex haust system. #
Make sure that no windscreen washer
concent rate spills out next tothe /ller
opening. *
N NOOTE
TE Damage totheex terior lighting due
to unsuitable windscreen washer 0uid Unsuitable windscreen
washer 0uids may
damage the plastic sur face of theex terior
lighting. #
Only use windscreen washer 0uids which
are also suitable for use on plastic sur fa-
ces, e.g. MB SummerFit or MB WinterFit. *
N
NOOTE
TE Bloc ked spr aynozzles caused by
mixing windscreen washer 0uids #
Do not mix MB SummerFit and MB Win-
te rFit with other windscreen washer 0u-
ids. Do not use distilled or de-ionised
water. Other-
wise, the /ll le vel sensor may be triggered er rone-
ous ly.
Re commended windscreen washer 0uid:
R abo vefreezing point: e.g. MB SummerFit
R below freezing point: e.g. MB WinterFit
Fo rth e cor rect mixing ratio, referto the informa-
tion on the antifreeze container.
Mix washer 0uid with windscreen washer 0uid all
ye ar round. Te
ch nical data
367
367