MERCEDES-BENZ E CLASS WAGON 2023 Owners Manual

Page 271 of 478

Select ¥.
The route to the destination is calculated.
Route guidance begins.
or
Select ¦.Select Set as Waypoint .
The destination address is set as the next
intermediate destination.
or
Select Start New Route Guidance .
The destination address is set as the new des-
tination. The previous destination and the intermediate destinations are deleted. Route
guidance to the new destination begins.
Selecting route settings
Select =.Select Advanced .Select Route.Select the route type.Take traPc information into consideration with
Dynamic Route Guidance H .Select route options with Avoid Options.Activate Suggest Alternative Route .
Alternative routes are calculated for every
route.Activate Activate Commuter Route .
If the requirements are met, the multimedia
system automatically detects that the vehicle
is on a commuter route. Route guidance
begins without voice output.
Activating route guidance with augmented reality
During route guidance, tap on the camera
symbol on the media display. The camera image will be shown instead of
the navigation map before a turning maneuver and will show additional information.To return to the navigation map: tap on the
camera symbol again.
Displaying additional information in the camera
image
Select =.Select Advanced .Select Augmented Reality .Activate Street Names and House Numbers .
During route guidance, street names and house numbers are shown in the camera
image.
Using map functions
Multimedia system:
4 © 5
Navigation
Setting the map scale
To zoom in: tap twice quickly with one Nnger
on the media display.To zoom out: tap with two Nngers on the
media display.
Moving the map
Move one Nnger in any direction on the
touchscreen.To reset the map to the current vehicle posi- tion: press = brieOy.MBUX multimedia system269

Page 272 of 478

Selecting map orientationTap repeatedly on the

Page 273 of 478

Select View.Select Map Elements .Scroll up and show the ONLINE MAP CON-
TENT category.Switch on a service, e.g. Weather.
Current weather information is displayed on
the navigation map, e.g. temperature or cloud
cover.
Parking service
*NOTE Damage to the vehicle due to not
observing the maximum permitted head-
room clearance
If the vehicle height is greater than the maxi- mum permitted headroom clearance, the roof
and other parts of the vehicle may be dam-
aged.
Observe the signposted headroom clear- ance.If the vehicle height is greater than the permitted headroom clearance, do not
enter.Observe the changed vehicle height with add-on roof equipment.*NOTE Vehicle damage due to failure to
observe local information and parking
conditions
The data is based on the information provided
by the respective service providers.
Mercedes-Benz does not guarantee the accu-
racy of the information provided in relation to
the car park or parking area.
Always observe the local information and
conditions.\bThis service is not available in all countries.Select = and activate Parking.Tap on ] in the map.Select a parking option.
The map shows the parking options in the
vicinity.The following information is displayed (if avail- able):
= Destination address, distance from current
vehicle position and arrival time
= Information on the parking garage/parking
lot, e.g.
- Opening times
- Parking charges
- Current occupancy
- Maximum parking time
- Maximum access height
The maximum access height shown by the parking service does not replace
the need for observation of the actual
circumstances.
= Available payment options (Mercedes pay,
coins, bank notes, cards)
= Details on parking tariMs
= Number of available parking spaces
= Payment method (e.g. at parking meters)
= Services/facilities at the parking optionMBUX multimedia system271

Page 274 of 478

=Telephone numberCalculate the route (  page 268).
Notes on the dashcam
*NOTE Risk of legal consequences follow-
ing violation of legal regulations and data
protection requirements
You are legally responsible for operation and
use of the dashcam functions.
The legal requirements relating to operation
and use of the dashcam can vary depending
on the country in which the dashcam is oper-
ated.
This function is not permitted in all countries.
Before using the dashcam, read up on
the content of the legal regulations, in
particular the data protection require-
ments in the respective country of use.Observe the legal regulations, in particu-
lar the data protection requirements.Selecting a USB device for a video recording with the dashcam
Requirements: = At least one USB device is connected with the
multimedia system .
Multimedia system: 4 © 5
Mercedes me & Apps
5 Dashcam
Select the USB device.\bWhen USB devices contain multiple partitions,
recorded video Nles are not always displayed
in the recording list. Mercedes-Benz recommends that you use
USB devices with one partition.
Starting or stopping video recording with the dashcam
Requirements: = A USB device is connected with the multime-
dia system .
= The vehicle is switched on.
Multimedia system:
4 © 5
Mercedes me & Apps
5 DashcamIf several USB devices are connected with the
multimedia system, select a USB device
(  page 272).Select the Individual Recording or Loop
Recording recording mode.
If Individual Recording is selected and the
memory is full the recording stops.
If Loop Recording has been selected, several
short video Nles are recorded. When the mem-
ory limit is reached, the oldest video Nle is
deleted and recording is continued automati-
cally.To start: select Start Recording .
The length of the recording is shown. The Please do not remove the storage medium.
message appears. The video Nle is stored on
the USB device.To end: select End Recording .272MBUX multimedia system

Page 275 of 478

A report may appear in the following cases:= For the Individual Recording recording mode:
the memory is full or there are only a few
minutes recording time available. The video
recording stops or will be stopped imminently.
Change the USB device or delete a video Nle.
= If a video recording has started and a national
border is detected, the National Border
Crossed. Please observe the country-spe-
cific regulations on video recording. message
appears.
This function is not available in all countries.
= The camera is not functional, the Camera
Unavailable message appears.
Have the camera checked in an authorized
Mercedes-Benz Center.Telephone
Telephony
q Notes on telephony
&WARNING Risk of distraction from operat-
ing integrated communication equipment
while the vehicle is in motion
If you operate communication equipment inte-
grated in the vehicle when driving, you could
be distracted from the traPc situation. This
could also cause you to lose control of the
vehicle.
Only operate this equipment when the
traPc situation permits.If you cannot be sure of this, stop the
vehicle whilst paying attention to road
and traPc conditions and operate the
equipment with the vehicle stationary.&WARNING Risk of accident from operating
mobile communication equipment while
the vehicle is in motion
Mobile communication devices distract the
driver from the traPc situation. This can also
cause the driver to lose control of the vehicle.
As a driver, only operate mobile commu-
nication devices when the vehicle is sta-
tionary.As a vehicle occupant, use mobile com-
munication devices only in the designa-
ted area, e.g. in the rear passenger com-
partment.You must observe the legal requirements for the
country in which you are currently driving when
operating mobile communication equipment in
the vehicle.&WARNING Risk of injury due to objects
being stowed incorrectly
If objects in the vehicle interior are stowed
incorrectly, they can slide or be thrown around
MBUX multimedia system273

Page 276 of 478

and hit vehicle occupants. In addition, cup
holders, open stowage spaces and mobile
phone receptacles cannot always retain all
objects within.
There is a risk of injury, particularly in the
event of sudden braking or a sudden change
in direction.Always stow objects so that they cannot
be thrown around in such situations.Always make sure that objects do not
protrude from stowage spaces, parcel
nets or stowage nets.Close the lockable stowage spaces before starting a journey.Always stow and secure heavy, hard,
pointed, sharp-edged, fragile or bulky
objects in the trunk/cargo compart-
ment.Observe the additional information on stowing
mobile communications devices correctly:
= Loading the vehicle (  page 110)
Bluetooth n
!

Page 277 of 478

qTelephone menu overview1Bluetooth n
device name of the currently con-
nected mobile phone/of the mobile phone2Bluetooth n
device name of the currently con-
nected mobile phone/of the mobile phone
(two phone mode)3Battery status of the connected mobile phone4Signal strength of the mobile phone network5Options6Device manager7Messages8Numerical pad9Contact searchq Telephony operating modes overview
Depending on your equipment, the following tel- ephony operating modes are available:
= A mobile phone is connected to the multime-
dia system via Bluetooth n
.MBUX multimedia system275

Page 278 of 478

=Two mobile phones are connected with the
multimedia system via Bluetooth n
(two phone
mode).
- You can use all the functions of the multi-
media system with the mobile phone in the foreground.
- You can receive incoming calls and mes-
sages with the mobile phone in the back- ground.
You can interchange the mobile phone in the foreground and background.
q Connecting a mobile phone
Requirements
= Bluetooth n
is activated on the mobile phone
(see the manufacturer\bs operating instruc- tions).
= Bluetooth n
is activated on the multimedia sys-
tem.Multimedia system:
4 © 5
Phone
Searching for a mobile phoneSelect í.Select Connect New Device .
Connecting a mobile phone
Authorization follows using secure simple pairing.
Select a mobile phone.
A code is displayed in the multimedia system
and on the mobile phone.If both codes match, conNrm the code on the
mobile phone.
q Functions in the telephony menu
In the telephony menu you have the following
functions, for example:
= Making calls, e.g.:
- R Accept a call
- L End Call
- J Create Confer. Call
- Accept or reject a waiting call
=
Managing contacts, e.g.:
- Downloading mobile phone contacts
- Managing the format of a contact\bs name
- Saving a contact as a favorite
= Receiving and sending messages, e.g.:
- Using the read-aloud function
- Dictating a new message276MBUX multimedia system

Page 279 of 478

Mercedes me app
Mercedes me calls
qMaking a call via the overhead control panel
1me button for service or information calls2SOS button cover3SOS button (emergency call system)
Making a Mercedes me call
Press me button 1.
Making an emergency call
To open the cover of SOS button 2 , press it
brieOy.Press and hold SOS button 3 for at least one
second.
If a Mercedes me call is active, an emergency call
can still be triggered. This has priority over all
other active calls.
q Information about the Mercedes me call
A call to the Mercedes-Benz Customer Center has
been initiated via the me button in the overhead
control panel or the multimedia system(  page 277).
Using the voice dialog system you access the desired service:
= Accident and Breakdown Management
= Mercedes-Benz Customer Center for general
information about the vehicle
You can Nnd information on the following topics:
= Activation of Mercedes me connect
=Operating the vehicle
= Nearest authorized Mercedes-Benz Center
= Other products and services from Mercedes-
Benz
Data is transferred during the connection to the
Mercedes-Benz Customer Center (  page 279).
q Calling the Mercedes-Benz Customer Center
using the multimedia system
Requirements
= Access to a mobile phone network is available.
= The contract partner\bs mobile network cover-
age is available in the respective region.
= The vehicle must be switched on so that vehi-
cle data can be transferred automatically.
Multimedia system: 4 © 5
Phone 5
gCall Mercedes me connect .
Aser conNrmation, the multimedia system
sends the required vehicle data. The data
transfer is shown in the media display.MBUX multimedia system277

Page 280 of 478

Then you can select a service and be connected
to a specialist at the Mercedes-Benz Customer
Center.
q Calling the Mercedes-Benz customer center
aser automatic accident or breakdown detection
Requirements: = The vehicle has detected an accident or break-
down situation.
= The vehicle is stationary.
= The hazard warning lights are switched on.\bThis function is not available in all countries.
The vehicle can detect accident or breakdown sit-
uations under certain circumstances.
Requirements for collision detection in the con- text of accident management:
= The vehicle is equipped with an anti-thes
alarm system (ATA) (code 551).
= The vehicle is equipped with the interior pro-
tection (code 882).
= The vehicle is equipped with the Anti-Thes
Protection Package (code P54).
= The collision detection service with thes notiN-
cation has been activated on Mercedes me
connect.
If a collision is detected when the tow-away alarm
is armed on a locked vehicle, you will receive a
notiNcation in the multimedia system when you
switch the vehicle on.
Find out at an authorized Mercedes-Benz Center if this functions is available in your country.
In the event an accident or breakdown is detec-
ted, the emergency guide shows safety notes in
the multimedia system display. This may take a few seconds.\bThe availability of collision detection dependson the vehicle.
In the event an accident or breakdown is detec-
ted, the emergency guide shows safety notes in
the multimedia system display.
Aser quitting the emergency guide display on the
multimedia system, a prompt appears asking
whether you would like to get support from the
Mercedes-Benz customer center.
Select Call.
= The vehicle data is sent automatically
(  page 281).
= The Mercedes-Benz customer center takes
your call and organizes the breakdown and
accident assistance.
You may be charged for these services.\bDepending on the severity of the accident, an
automatic emergency call can be initiated. This has priority over all other active calls
(  page 285).\bIn addition, if the Mercedes me connect
service "Telediagnostics" is active, a similar
prompt can appear aser a delay in the event
of a breakdown. If you are already in contact
with the Mercedes-Benz customer center or
have already received support, this prompt
can be ignored or declined.\bIf you answer the prompt for support from the Mercedes-Benz customer center with Later,
the message will be hidden and appear again later.278MBUX multimedia system

Page:   < prev 1-10 ... 231-240 241-250 251-260 261-270 271-280 281-290 291-300 301-310 311-320 ... 480 next >