MERCEDES-BENZ EQE SALOON 2022 Owners Manual

&
W
WARNI NG
ARNI NGRisk of accident due toobjects
located abo veor below the de tection
ra nge of Memo ryParking Assist
If th ere are objects abo veor below the de tec-
tion range, thefo llowing situations may arise:
R Memory Parking Assist may steer too
ear ly.
R The vehicle may not stop in front of these
objects.
This result in a collision. #
Inthese situations, do not use Memory
Pa rking Assist. Objects located abo
veor below the de tection
ra nge of Memo ryParking Assist may not be
de tected during the parking procedure.
Dr aw bars of par ked trailers, among other objects,
th at pr otru de into the parking space may not be
de tected. Do not use Memory
Parking Assist in thefo llowing
situations, forex ample:
R Inextreme weather conditions suc has ice,
pac ked snow or in heavy rain.
R When transporting a load that pr otru des
be yond theve hicle.
R Ifth e parking space is on a steep downhill or
uphill gradient.
R When snow chains are /tted.
R
R ecor
ecor ding a par
ding a par king pr
king procedur
ocedur e using Memory
e using Memory
P
P ar
ar king Assist
king Assist
R
R eq
eq uir
uir ements:
ements:
R The entire route is, fore xamp le, within your
ow n prope rty and not on public roads.
R The system needs refere nce points in the sur-
ro undings toorient itself, suchas fences, walls
or trees. Therefore, aTer starting theve hicle, a
cer tain distance must /rst be driven. If not
enough refere nce points are de tected in the
sur rounding area, no new route can be recor-
ded. #
Press button 1.
The Camera & parking view opens inthe cen-
tral displa y. 288
288
Driving and parking

#
Select 2menu Memory Parking Assist. #
Brake theve hicle toa standstill at the desired
starting point of the assisted parking proce-
dure, e.g. a driv eway entrance. #
T To st
o st ar art r
t r ecor
ecor ding:
ding: press3.
% If not all conditions for a recording are met,
symbol 3isgrey ed out. #
Park theve hicle in the desired parking space.
Do not exceed 8 km/h. #
T
To end r
o end r ecor
ecording:
ding: stoptheve hicle and press
3 again.
The recording is stored.
% Inthe Memory Parking Assist settings you can
dele teand rename stored parking proce-
dures.
P P ar ar king wit
king wit h Memor
h Memor y P
y Par
arking Assist
king Assist
R
R eq
eq uir
uir ements:
ements:
R A parking procedure has been recorded. #
Press button 1.
The Camera & parking view opens inthe cen-
tral displa y. #
Select Memory Parking Assist menu2. #
Brake theve hicle toa standstill at the starting
point of the stored parking procedure. #
T To st o st ar
art t
t t he par
he par king pr
king pr ocedur
ocedur e:
e:press6. #
Select the stored parking procedure from the
list. Driving and parking
289
289

#
Follow the inst ructions on the central displa y.
The vehicle drives into the selected parking
space.
% The turn signal indicator is not switched on
automaticall y.Yo u are responsible for select-
ing the turn signal indicator in accordance
with the tra1c conditions. #
ATer completion of the parking procedure,
safeguard theve hicle against rolling away.
Exiting a par
Exiting a par king space wit
king space wit h Memor
h Memory P
y Par
arking
king
Assist
Assist
R R eq
eq uir
uir ements:
ements:
R The exiting procedure wasre corded toget her
with there specti veparking procedure and
stored separately within one driving cycle.
R The vehicle was par ked using Memory Parking
Assist. #
Press button 1.
The Camera & parking view opens inthe cen-
tral displa y. #
Select Memory Parking Assist menu2. S
S
t
tar
ar ting t
ting t he e
he exiting pr
xiting procedu re
ocedure #
Press 6. #
Con/rm the sa vedex iting procedure. #
Follow the inst ructions on the central displa y.
The vehicle drives there corded route.
% The turn signal indicator is not switched on
automatically .Yo u are responsible for select-
ing the turn signal indicator in accordance
with the tra1c conditions. #
Take cont rol of theve hicle aTer theex iting
procedure has been comple ted.
Se Se tting Memor
tting Memor y P
y Par
arking Assist
king Assist
Multimedia system:
4 © 5
Settings 5
Assistance
5 Camera & parking 5
Parking Assistance
5 Memory Parking Assist
R
R enaming a r
enaming a r ecor
ecording
ding #
Select Manage lanes. #
Select ´nexttothe desired recording. #
Enter a name and con/rm with OK.Dele
Dele
ting a r
ting a r ecor
ecording
ding #
Select Manage lanes. #
Select Enexttothe desired recording. #
Con/rm the message prom ptwith Yes.
Dele
Dele ting all r
ting all r ecor
ecordings
dings #
Select Manage lanes. #
Select Delete all lanes .
% Alternativel y,yo u can dele teall data in Mem-
ory Parking Assist byresetting the multimedia
system (/ page 324). T
T
r
railer hitch
ailer hitch N
No
ot
tes on tr
es on tr ailer oper
ailer oper ation
ation *
N
NOOTE
TE The operating permit may be in vali-
dated due tothe illegal installation of
trailer hitches The installation – including
retro/tting – of a
non- folding or non-remo vable trailer hitch that
eve n partial lyconceals the license plate or the
lighting system is prohibited. 290
290
Driving and parking

#
Obser vethe applicable legal regulations
fo rth e installation of trailer hitches. Obser
vethefo llowing no tes on theto ngue weight:
R Do not use a tongue weight that exceeds or
fa lls below the permissible tongue weight
R Use a tongue weight as close as possible to
th e maximum tongue weight
Do not exceed thefo llowing values:
R Perm issible towing capacity
R Perm issible rear axle load of theto wing vehi-
cle
R Perm issible gross weight of theto wing vehicle
R Perm issible gross weight of the trailer
R Maximum permissible speed of the trailer
Ensure thefo llowing before starting a journe y:
R The tyre pressure on there ar axle of theto w-
ing vehicle is set for a maximum load
R The lighting of the connected trailer is opera-
tional In
theev ent of increased rear axle load, the car/
trailer combination must not exceed a maximum
speed of 100 km/h forre asons conce rning the
operating permit. This also applies in countries in
which the permissible maximum speed for car/
trailer combinations is abo ve100 km/h. F
F
olding t
olding t he ball nec
he ball nec k out and in
k out and in &
W
WARNING
ARNING Risk of accident due tothe ball
neck not being engaged
If th e ball neck is not engaged, the trailer may
come loose. #
Always engage the ball neck as descri-
bed. &
W
WARNING
ARNING Risk of injury from ball neck
swinging outwards
The ball neck may swing outwards when
unlocking or when it has not been proper ly
engaged.
There is a risk of injury within the ball neck's
ra nge of mo vement! #
Unlock the ball neck only when its range
of mo vement is unobstructed. #
Always be sure the ball neck is engaged
when folding in wards. *
N NOOTE
TE Increased risk of damage toprop-
erty due tofolded-out ball neck #
When the trailer is not coupled or the
bicycle rack is attached, fold in the ball
neck or, in the case of a fully electric
trailer hitch, retract the ball nec k. *
N
NO
OTE
TE Damage totheve hicle due toincor-
re ct use of the trailer hitch When a trailer hitch is used
toreco ver a vehi-
cle, theve hicle may be damaged in the proc-
ess. #
Use the trailer hitch only for pulling a
trailer or attaching appr oved car rier sys-
te ms (e.g. a bicycle rack ). R
R
eq
eq uir
uir ements:
ements:
R The vehicle is secured against rolling away. Driving and parking
291
291

R
The swivel range is clear.
R The trailer cables or ada pter plugs ha vebeen
re mo ved.
F
F olding t
olding t he ball nec
he ball nec k out
k out #
Pull switch 2until the ball neck unloc ks.
The ball neck will fold out from under there ar
bumper.
Indicator lamp 1will 0ash. #
Pull the ball neck in the direction of the ar row
until it engages audibly in a vertical position.
Indicator lamp 1onthe ball neck release
switch will go out.
If th e ball neck is not securely loc ked in place,
th eCheck trailer hitch lock message will
appear on the driver displa y. #
Remo vethe co ver cap from the ball head and
store it in a safe place. Make sure
that the ball on the ball neck is clean.
Check that it is either greased or dry (g rease-
free), depending on the inst ructions forth e trailer.
F
F olding t olding t he ball nec
he ball nec k in
k in #
Pull switch 2until the ball neck unloc ks.
The ball neck will fold up under there ar
bumper.
Indicator lamp 1will 0ash. #
Push the ball neck in the direction of the
ar ro w until it engages audibly behind the
bumper.
Indicator lamp 1will go out and the message
on the driver display will disappear.
Obser vethe information about the displa yson the
driver's displa y:
R Indicator and warning lamps (/ page 489)
R Display message s (/page 424) 292 292
Driving and parking

Coupling up/uncoupling a tr
Coupling up/uncoupling a tr
ailer
ailer&
W
W ARNING
ARNING Risk of injury due toach ange
in vehicle le vel
V
V ehicles wit
ehicles wit h AIRMA
h AIRMATIC:
TIC:theve hicle le vel may
be changed unintentionall y,e.g. by ot her peo-
ple. If you couple or uncouple the trailer dur-
ing this time, you may become trapped. In
addition, other people could become trapped
if parts of their body are between theve hicle
body and the tyres or underneath theve hicle.
Obser vethefo llowing when coupling or
uncoupling: #
Do not open or close any doors or the
boot lid. #
Do not initiate the le vel control and do
not operate theDY NAMIC SELECT
switch. #
Do not lo ckor unlock theve hicle. R
R
eq
eq uir
uir ements:
ements:
R The ball neck is extended and engaged in a
securely loc ked position. R
V
Vehicles wit
ehicles wit h AIRMA
h AIRMATIC:
TIC:ensure theve hicle is
at the normal le vel (/ page 262).
Use the normal le vel in trailer operation. High-
le ve l driving is not permitted in trailer opera-
tion on public roads.
Tr ailers with a 7-pin plug can be connected tothe
ve hicle with thefo llowing adap ters:
R Adapter plug
R Adapter cable
The trailer will be cor rectly de tected bytheve hi-
cle only if thefo llowing conditions are met:
R The trailer is connected cor rectl y.
R The trailer lighting system is in working order.
The functions of thefo llowing systems will be
a.ec tedbya cor rectly connected trailer:
R ESP ®
trailer stabilisation
R Active Lane Keeping Assist
R Parking Assist PARKTRONIC
R Active Parking Assist
R Blind Spot Assist or Active Blind Spot Assist R
Drive Away Assist
R Cross tra1c warning
R Manoeuvring brake function
R Reversing camera
R 360° camera
R AIRMATIC
Coupling up a tr
Coupling up a tr ailer
ailer
* NO
NOTE
TEDamage tothe star ter battery due
to full dis charge Charging
the trailer battery using the po wer
supply of the trailer can damage the star ter
batter y. #
Do not use theve hicle's po wer supply to
ch arge the trailer batter y. #
Remo vethe co ver cap from the ball head and
store it in a safe place. #
Position the trailer on a le vel sur face behind
th eve hicle and couple it up totheve hicle. Driving and parking
293
293

#
Open the soc ket cap. #
Inse rtthe plug with lug 1ingroo ve 3 on
th e soc ket. #
Turn bayonet coupling 2totheright as far as
it will go. #
Let the cap engage. #
Secure the cable tothe trailer with cable ties
(only if you are using an adap ter cable). #
Make sure that the cable is alw ays slack for
ease of mo vement during cornering. Under
thefo llowing conditions, a message may
appear on the driver's display even if the trailer
has been connected cor rectl y:
R LEDs ha vebeen ins talled in the trailer lighting
system.
R The cur rent has fallen below the trailer lighting
system's minimum cur rent (50 mA).
% Accessories can be connected tothe perma-
nent po wer supply up to180 W and tothe
po we r supply that is switched on via the igni-
tion loc k.
U
U ncoupling a tr
ncoupling a tr ailer
ailer &
W
WARNI NG
ARNI NGRisk of being crushed and
becoming trapped when uncoupling a
trailer
When uncoupling a trailer with an engaged
inertia-activated brake, your hand may
become trapped between theve hicle and the
trailer dr awbar. #
Do not uncouple trailers with an engaged
ove rrun brake. *
N NOOTE
TE Damage during uncoupling with an
engaged overrun brake The
vehicle may be damaged if you uncouple
with an engaged overrun brake. #
Do not uncouple trailers with an engaged
ove rrun brake. #
Secure the trailer against rolling away. #
Disconnect the electrical connection between
th eve hicle and the trailer. #
Uncouple the trailer. #
Place the co ver cap on the ball head.
% T
Tr
railer
ailer s wit
s wit h LED lighting:
h LED lighting: aTer uncoupling the
traile r,switch theve hicle on and then o.
again. 294
294
Driving and parking

Bicy
Bicy
cle r
cle r ac
ack function
k function &
W
WARNI NG
ARNI NGRisk of an accident if the bicy-
cle rack is used incor rectly
The bicycle rack may become de tach ed from
th eve hicle in thefo llowing cases:
R the permissible load capacity of the trailer
hitch is exceeded.
R the bicycle rack is used incor rectl y.
R the bicycle rack is secured tothe ball neck
beneath the ball head.
Obser vethefo llowing foryo ur ow n sa fety and
th at of other road users:
R always adhere tothe permissible load
capacity of the trailer hitch.
R always obser vethe permissible rear axle
load of theto wing vehicle.
R use the bicycle rack only totransport bicy-
cles. R
always mount the bicycle rack proper lyby
attaching tothe ball head and the ball
neck guide pin, if possible.
R when transporting four bicycles, alw ays
use bicycle rack s which ha veadditional
support on the ball neck guide pin.
R use only bicycle rack s appr oved by
Mercedes-Benz.
R always obser vethe bicycle rack operating
instructions. *
N NOOTE TE Damage toor breakage of the trailer
hitch due tounsuitable or improper lyused
bicycle rack. #
Only use bicycle rack s appr ovedby
Mercedes-Benz prope rly as described
bel ow. *
N
NO
OTE
TE Increased risk of damage toprop-
erty due tofolded-out ball neck #
When the trailer is not coupled or the
bicycle rack is attached, fold in the ball neck or, in
the case of a fully electric
trailer hitch, retract the ball nec k. *
N
NO
OTE
TE The ope rating permit may be in vali-
dated due tothe illegal ins tallation of
trailer hitches The installation – including
retro/tting – of a
non- folding or non-remo vable trailer hitch that
eve n partial lyconceals the license plate or the
lighting system is prohibited. #
Obser vethe applicable legal regulations
fo rth e installation of trailer hitches. Driving and parking
295
295

Tr
ailer hitch (example with additional guide pin)
Depending on the bicycle rack 's design, di.erent
numbers of bicycles can be transpor ted.
The following bicycle rack designs are possible:
R When mounted byattaching toball head 1,
th e maximum load capacity is 75 kg. You can
transport up tothre e bicycles. R
When mounted on ball head 1and guide pin
2, the maximum load capacity is 100 kg. Yo u
can transport up tofour bicycles.
The maximum load capacity is calculate d fromthe
we ight of the bicycle rack and the bicycle rack
load.
Obser vethe no tes on driving with a roof load,
trailer or fully laden vehicle (/ page 181).
When using a bicycle rack , set the tyre pressure
fo r increased load on there ar axle of theve hicle.
Fu rther information on the tyre pressure can be
fo und in the tyre pressure table (/ page 398).
N
No ot tes on loading
es on loading
The lar gerth e distance between the load's centre
of grav ity and the ball head, thegr eater the load
on the trailer hitch.
Obser vethefo llowing no tes:
R mount heavy bicycles as close totheve hicle
as possible
R always distribute the load on the bicycle rack
as evenly as possible across theve hicle's lon-
gitudinal axis Mercedes-Benz
recommends removing all de tach-
able parts from bicycles (e.g. bask ets, ch ild seats,
batteries) before loading them onto the bicycle
ra ck . This will impr ovethe aerodynamic resist-
ance and cent reofgrav ity of the bicycle rack.
Alw ays secure the bicycles toprev ent them from
moving around and check them at regular inter-
va ls to ensure that they are secure.
Do not use tarp aulins or other co vers. The driving
ch aracteristics and rear view may be impaired. In
addition, aerodynamic resis tance and the load on
th e trailer hitch will increase. 296
296
Driving and parking

Load distribution on
the bicycle rack
1 Vertical distance between centre of grav ity
and ball head
2 Horizontal distance between centre of grav ity
and ball head
3 The centre of grav ity is on theve hicle's cen-
tral axis
Obser vethefo llowing information when loading
th e bicycle rack: Loading t
Loading t he bicy
he bicycle r
cle rack
ack 3 bicy
3 bicy
cles
cles 4 bicy
4 bicycles
cles
To talwe ight
of bicycle
ra ck and load Up
to75 kg Up to100 kg
Max. distance
1 420 mm 420 mm
Max. distance
2 300 mm 400 mm When transporting
four bicycles or a tota lwe ight
between 75 kg and 100 kg, alw ays use bicycle
ra ck s with additional support on the trailer hitch
guide pin. V V
ehicle to
ehicle towing ins
wing ins tr
tructions
uctions
The vehicle is not suitable forth e use of tow bar
systems that are used for 0at towing or dinghy
to wing, forex ample. Attach ing and using tow bar
systems can result in damage totheve hicle.
When you are towing a vehicle with tow bar sys-
te ms, safe driving characteristics cann otbe guar- anteed
forth eto wing vehicle or theto we dve hicle.
The vehicle-trailer combination may swer vefrom
side toside.
Obser vethefo llowing information:
R Perm itted towing me thods (/ page 388)
R The no tes on towing theve hicle with bo th
axles on thegr ound (/ page 388) Driving and parking
297
297