MERCEDES-BENZ S-CLASS SALOON LONG 2022 Owners Manual

user proNle and protected applications with
the facial scan.
Authenticating using Nng
erprints
Place and lis y
our Nnger several times on the
Nngerprint sensor under the touchscreen
( page 358).
The Nnger is scanned. If the scanning proce-
dure is successful, a message appears on the
central display. You can unlock your user pro-
Nle and protected applications with your Nnger
print.
Authenticating using voice recognition 
Speak the sentence shown on the central dis-
pla
y and follow the voice assistant's instruc-
tions.
If the voice recognition was successful, a mes-
sage appears on the central display. You can
unlock your user proNle.
% Avoid background or disturbing noises during
v

oice recognition. Deleting biometric data 
Tap on * , f
or example, behind Facial rec-
ognition. 
Select Yes .
Teaching in the vehicle key for pr
oNle selection 
Select Protect content . 
Select Key recognition. 
Have the key ready and follow the set-up
assis
tant's prompts.
The user proNle is linked to the selected key. If
you open the vehicle with the key, the light,
mirror and seat settings for your user proNle
are pre-activated. The key you are currently
using for unlocking is used.
The key is only stored for the driver and for
one user proNle.
Selecting a user
% When you call up your driver pr
oNle, the driv-
er's seat and the steering wheel can be set. You can cancel the setting process with the
f
ollowing actions:
= Press Tap here to cancel. message on the
central display.
= Press one of the seat operating buttons in
the driver's door. 
Select Change user . 
Select a user. 
When requested to do so, authenticate with
t

he Mercedes me PIN or a taught-in biometric
characteristic.
The user proNle is loaded and activated.
% If you select Continue without selecting user ,
no speciNc se

ttings for the user proNle are
loaded.
ConNguring and dele
ting suggestions 
Select ©. 
Select Settings . 
Select System. 
Select Suggestions. 
Select =. 378
MBUX multimedia system


Switch the options on or oM individuall y.
If an option is switched on and suPcient data
has been gathered, personalised suggestions
based on your user behaviour will be oMered
to you on the zero layer. These are, for exam-
ple, visited navigation destinations, dialled
phone numbers as well as suggestions based
on your music preferences. 
To delete collected suggestions: select

Install these updates, or else the security of your
multimedia sy stem cannot be ensured.
The multimedia system displays a corresponding
message when a sosware update is available.
If the Automatic online update option is active,
sosware updates are downloaded automatically. If
the option is deactivated, you will be informed of
new sosware updates once. The sosware updates
are available for downloading for a limited period
of time.
Carrying out a sosware update:
= You can start sosware updates via the com-
munication module.
= You can start sosware updates via a Wi-Fi hot-
spot.
= You can start map updates from an external
medium.
% Online sosw
are updates cannot be performed
via external Wi-Fi hotspots that are encrypted
using TKIP.
% To complete sosw
are updates via the commu-
nication module, the vehicle must be connec- ted with the Internet and a Mercedes me user
account.
% To complete sosw
are updates via Wi-Fi, the
vehicle must be connected to an external Wi-
Fi hotspot.
A sosw
are update consists of three steps: = Downloading or copying of the data required
for installation
= Installation of the downloaded sosware
update
= Activation of the downloaded sosware update.
% It may be necessary to restart the MBUX mul-
timedia sy
stem aser completion of a sosware
update.
% While some sosw
are updates are being down-
loaded, the multimedia system cannot be
operated and the vehicle functions may be
restricted.
% Some sosw
are updates require a safe vehicle
status for the installation to be completed.
They can only be carried out in a safely
parked vehicle with the vehicle switched oM.For sosw
are updates requiring a safe vehicle sta-
tus: when the last installation step is reached, a
message appears on the central display aser the
vehicle is switched oM. Follow the step-by-step
instructions on the central display to complete the
installation.
There are sosware updates that can only be
installed when the vehicle is safely parked, there
are no more people in the vehicle and the vehicle
is locked.
Availability of the driver's and central display
During the installation of sosware updates, it is
not possible to use the vehicle, central display
and driver's display. You may receive the following
display message when an installation is running: 380
MBUX multimedia system

%
The display message does not appear every
time a sosw
are update is installed.
In rare cases, an error can occur during the instal-
lation. The multimedia sy
stem automatically
attempts to restore the previous version.
If it is not possible to restore the previous version,
the display message shown above appears every
time the vehicle is started.
Failure of the driver's display
If the driver's display fails or there is a malfunc-
tion, you may not recognise limitations in the
functions of systems relevant to safety or the
speed display, for example. The operating safety
of the vehicle may be impaired. Drive on carefully and have the vehicle checked at a
q
ualiNed spe-
cialist workshop immediately (  page 525).
Further information about sosware updates can
be found at https://me.secure.mercedes-
benz.com.
Failure of the central display
If the central display fails or the display message
shown above is shown continuously, several sys-
tems such as the reversing camera, PARKTRONIC
or climate control are no longer available. Drive
on carefully and consult a specialist workshop as
soon as possible. Setting up a Wi-Fi hotspot
Requirements
=
The W

i-Fi function is activated on the multime-
dia system and the communication device to
be connected.
= The communication device to be connected
supports at least one of the types of connec-
tion described.
The connection types shown depend on the
device to be connected. The function must be supported by the multimedia system and by
t
he device to be connected. The type of con-
nection established must be selected on the
multimedia system and on the device to be
connected.
% Some functions may Nr
st need to be activated
on the communication device being connec-
ted. More detailed information can be found
in the manufacturer's operating instructions.
% The use of the vehicle data t
ariM by external
devices is not available in all countries.
Multimedia system: 4 © 5
Settings 5
System
5 Internet and Bluetooth
% The availability of the functions is dependent
on t
he country. 
Select Wi-Fi.
The contr

oller is to the right: Wi-Fi is switched
on.
When the Wi-Fi function is switched on, you can
connect t
he multimedia system with external hot-
spots or make it available as a hotspot for external
devices. MBUX multimedia system
381

When the Wi-Fi function is switched
oM, it is no t
possible to establish a hotspot connection.
When the Wi-Fi function is switched oM, no con-
nection can be established with the MBUX rear
tablet.
% Depending on the vehicle equipment, you can
pur

chase a data package directly from a
mobile phone network provider via the
Mercedes me Store. To be able to use the
data package, you conclude a separate con-
tract with a mobile phone network provider
via the Mercedes me Store, which can be ter-
minated at any time and for which there are
no costs. This contract is a prerequisite for
using the services from the previously pur-
chased package. The availability of this option
is dependent on the country. If the data pack-
age option is not available or can be upgra-
ded, you can purchase data volume directly
from the mobile phone network provider for a
fee.
% The use of the vehicle data t
ariM by external
devices is not available in all countries. Using the multimedia system as a Wi-Fi hotspot 
Select MBUX hotspot. 
Select one of the following connection
op

tions.
Connecting using a QR code
R
equirement: an app for scanning the QR code is
installed on the device being connected.
Alternatively: the device being connected has an
integrated QR code scanner (see manufacturer's
operating instructions). 
Scan the QR code shown.
The W

i-Fi connection is established.
Connecting using NFC 
Activate NFC on the device to be connected. 
When the NFC icon is displayed in the MBUX
hotspot menu, hold t
he device to be connec-
ted to the NFC interface. 
Follow the instructions on the device.
The W

i-Fi connection is established. Connecting using a security key 
Select the vehicle from the device to be con-
nect
ed. The vehicle is displayed with the
MBUX XXXXX network name. 
Enter the security key which is shown in the
centr
al display on the device to be connected. 
ConNrm t
he entry.
Generating a new security key 
Select the hotspot name MBUX XXXXX in t
he
MBUX hotspot menu. 
ConNrm t
he prompt with Yes.
A new security key is generated.
A connection will be established with the newly
cr
eated security key.
% When a new security key is generated, all
e

xisting Wi-Fi connections are then discon-
nected. If the Wi-Fi connections are being re-
established, the new security key must be
entered.
Using a mobile communication device as a Wi-Fi
ho
tspot (tethering)
% This function is country-dependent. 382
MBUX multimedia system


Select the Manage Internet access op tion in
the Internet and Bluetooth menu.
% The Wi-Fi function on the mobile phone and
Int

ernet access via Wi-Fi must be activated
(see the manufacturer's operating instruc-
tions). 
Select Search for access. 
Select the network. 
Log in to the Wi-Fi network.
or 
Select the mobile phone with the


Select Reset .
A q uery appears asking if the system should
really be reset. 
Select Yes .
The multimedia sy
stem is reset to the factory
settings. The multimedia system is restarted
aser the system reset.
% Due to data protection, as well as the function
of individual dr
iving systems and driving safety
systems, it is a requirement to carry out a
complete system reset before selling the vehi-
cle or transferring it to a third party, or aser
use as a hire car. AMG TRACK PACE
Function of AMG TRACK PACE
%
This function is an on-demand feature and
can be activ
ated via Mercedes me aser you
purchase your vehicle. The Digital Owner's
Manual contains further information on
Mercedes me and on-demand features.
With AMG TRACK PACE, the driving characteris-
tics on r
ace tracks can be analysed and opti- mised. You can drive previously saved race tracks
(e.g. Hoc
kenheimring), or record and save new
tracks. The driven lap times are stored for every
track. These can be analysed and compared to
other lap times to achieve the best possible race
results. Additionally, acceleration and braking pro-
cedures can be measured and stored.
Note: Use AMG TRACK PACE only on closed-oM
routes outside the public traPc area. Adapt your
driving style to your personal performance and
environmental conditions. As the driver, you are
solely responsible for driving your vehicle. Park
your vehicle safely before operating the applica-
tion. Setting Track Race
Multimedia system:
4 TRACK PACE 5
Track Race
R

ecording a new track 
Select New track. 
Select

Measuring time on a saved track

Select All tracks
. 
Select the desired track. 
Select W. 
Select Start timing if y ou are already at the
starting line.
or 
Select Navigate to f
or navigation to the start-
ing line.
Timing begins automatically when the starting line
has been cr
ossed.
% When

1
Lap overview
2 Parameter overview
3 Editing parameters
4 Deleting parameters
5 Adding new parameters
% The following values can be set for the param-
e
ters, for example:
= speed =
Longitudinal/lat
eral acceleration
= Steering angle
= Engine speed
= Engine oil/tyre temperature
Based on the analysis, you can check and opti-
mise t
he driving behaviour for any position on the
track.
Exporting tracks (USB) 
Select õ Tracks.
An o
verview of all stored tracks appears. 
Select the desired track. 
Select options W f
or the desired track. 
Select Export track to

Measurement can be stopped early by interrupt-
ing t
he acceleration procedure.
Quarter mile race 
Select = Drag race options. 
Select Quarter-mile. 
Set a target distance.
Measur

ement stops as soon as the speciNed
target distance has been reached. 
Start oM and begin t
he measurement.
Measurement begins when the vehicle accel-
erates. Timing runs until the target distance or
a maximum of one mile has been travelled.
Measurement can be stopped early by interrupt-
ing t
he acceleration procedure.
Measuring braking 
= Drag Race options 
Select Braking. 
Set a starting speed or select Automatic. 
Start oM and begin t
he measurement. 
Brake to a stop.
Measur

ement is incremental, in steps of
10 km/h to a stop. If the braking procedure is
started e.g. at a speed of 157 km/h, meas-
urement starts as soon as 150 km/h has
been reached.
Storing and calling up measured values
If measur
ement is completed or cancelled, a
prompt appears asking whether the measurement
should be saved. 
ConNrm t
he prompt with OK to save.
Calling up saved measurements 
± Select History. 
Select Acceleration, Quarter-mile or Braking. 
Select a measurement.
The desir

ed measurement is displayed in
detail.
or 
Delete a measurement. Calling up the telemetry display
Multimedia system:
4 TRACK PACE 5
Telemetry
The t

elemetry display shows current vehicle data
as a digital value and as a diagram. Up to four
parameters can be selected to be shown on the
display.
For example:
= Engine speed
= Wheel angle
= Speed
= Steering angle 
Set the desired parameters. 
Set the time.
The se

t parameters are evaluated in the dia-
gram for the selected time. ConNguring
AMG TRA
CK PACE Requirements:
T

o connect a mobile device to the TRACK PACE
app: MBUX multimedia system
387