reset MERCEDES-BENZ SLK-Class 2007 R171 Comand Manual

Contents
Selecting the region . . . . . . . . . . . 119
Entering a city. . . . . . . . . . . . . . . . 119
Narrowing of the destination
after selecting a city . . . . . . . . . . . 121
Entering a city center . . . . . . . . . . 121
Entering a street in the
destination city . . . . . . . . . . . . . . . 122
Narrowing of the destination
after selecting a street . . . . . . . . . 124
Entering an intersection . . . . . . . . 124
Entering a house number . . . . . . . 125
Entering a destination using the
map . . . . . . . . . . . . . . . . . . . . . . . 127
Entering a destination via geo
coordinates. . . . . . . . . . . . . . . . . . 128
Storing map locations. . . . . . . . . . 130
Route guidance . . . . . . . . . . . . . . . . . 131
Starting route guidance menu . . . 131
Route calculation . . . . . . . . . . . . . 131
Route re-calculation . . . . . . . . . . . 131
Navigation announcements . . . . . 132
Navigation displays. . . . . . . . . . . . 132
Destination reached . . . . . . . . . . . 135
Cancelling route guidance . . . . . . 135
Partially digitized areas. . . . . . . . . 135
Off-road and off-map . . . . . . . . . . 137During route guidance . . . . . . . . . . . . 139
Showing soft key displays . . . . . . 139
Info menu . . . . . . . . . . . . . . . . . . . 139
Displaying the route on the map . 140
Displaying the route list . . . . . . . . 141
Detour function. . . . . . . . . . . . . . . 141
Stop-over . . . . . . . . . . . . . . . . . . . 143
Defining route guidance displays . 146
Setting symbols display . . . . . . . . 147
Setting map orientation . . . . . . . . 148
Map display menu. . . . . . . . . . . . . 148
Automatic map toggling . . . . . . . . 149
Scales for full-screen and
split-screen map display . . . . . . . . 150
Last destinations and
destination memory . . . . . . . . . . . . . . 151
Last destinations memory . . . . . . 151
Destination memory . . . . . . . . . . . 152
POIs (Points of Interest) . . . . . . . . . . . 155
Entering POIs . . . . . . . . . . . . . . . . 155
Selecting POI in the local area of
the current position . . . . . . . . . . . 156
Selecting POI for a selected city. . 157
Selecting POI for a long-distance
destination . . . . . . . . . . . . . . . . . . 157
Selecting a POI using the map . . . 159
Service . . . . . . . . . . . . . . . . . . . . . . . 161
Tele Aid*. . . . . . . . . . . . . . . . . . . . . . . 162
Emergency call system . . . . . . . . . 162
Roadside Assistance . . . . . . . . . . . 162
Information . . . . . . . . . . . . . . . . . . 163
System . . . . . . . . . . . . . . . . . . . . . . . 165
System settings . . . . . . . . . . . . . . . . . 166
Calling up the System menu . . . . . 166
Setting the date/time . . . . . . . . . . 166
Setting the language . . . . . . . . . . . 168
Switching confirmation beeps and
acoustic signals ON/OFF . . . . . . . 168
Display settings . . . . . . . . . . . . . . 169
Reset function. . . . . . . . . . . . . . . . 170
Glossary . . . . . . . . . . . . . . . . . . . . . . 173
Index . . . . . . . . . . . . . . . . . . . . . . . . . 177

13 At a glance
Radio operating elements
FunctionPage
1 Audio main menu38
2 Soft keys
(multifunction buttons)
3 ! - "
Entering frequency man-
ually
Storing stations
Requesting station pre-
sets
44
46
42
FunctionPage
4 #, $, %, &
Tuning stations FM / AM
Station memory,
selecting presets
41
42, 46
5 '
Confirmation
6 (
Mute function
39
FunctionPage
7 )
Switching COMAND
ON/OFF
31
8 *
Volume adjustment
31
9 + and,
Station search
Manual tuning
42
44

21 At a glance
Satellite Radio* operating elements
FunctionPage
1 SAT main menu80
2 Soft keys
(multifunction buttons)
3! - "
Entering channel manual-
ly
Storing stations
Requesting station pre-
sets
81
84
81
FunctionPage
4 #, $, %, &
Program category tuning
Station tuning
Station memory,
selecting presets
81
82
81, 84
5 '
Confirmation
6(
Mute function
39
FunctionPage
7 )
Switching COMAND
ON/OFF
31
8 *
Volume adjustment
31
9 + and,
Station tuning
82

26 At a glance
Multifunction steering wheel
FunctionPage
1 Multifunction display
FunctionPage
2 Volume setting:
æ Volume up
ç Volume down
31
31
3 Making calls:
s
Answering calls
Starting connection
Redialing
t
Ending or refusing calls
Entering a phone num-
ber:
t
Deleting the entire entry
94
99
95
94
95
4 Radio mode:
j Next station:
via station search
via station presets
41
42
FunctionPage
4 Radio mode:
k Previous station:
via station search
via station presets
41
42
4 Single CD, MP3 and CD
changer* mode:
j Next track
k Previous track
72
72
4Satellite radio* mode:
j Next station
k Previous station
83
83
4Telephone* mode:
j Next list entry
k Previous list entry
98
98
5 Multifunction display
menu change:
è forward
ÿ back
27
27

27 At a glance
Multifunction steering wheel
You can switch the multifunction display to
the respective operating mode if you wish
to operate the system using the buttons on
the multifunction steering wheel.
On the multifunction steering wheel,
pressè or ÿ repeatedly until
Radio, Single CD, MP3, CD changer*,
Satellite radio* or Telephone* display
appears in the multifunction display of
the instrument cluster.
Radio operation
1Waveband and position in Preset menu
2Station frequencySingle CD operation
1Single CD operation
2Current track
CD changer* operation
1Current CD
2Current trackMP3 operation
1MP3 operation
2Current track
Selecting the multifunction display
i
Depending on vehicle production date
COMAND may not be equipped with
the MP3 functionality. If so, the CD
changer* may be used for playback of
MP3 CDs.

28 At a glance
Multifunction steering wheel
Satellite radio* operation
1SAT and position in Preset menu
2Channel name
Telephone* operation
If a telephone has been installed, either the
main display or a list appears.
Telephone main display
1Telephone operation
2Telephone network informationIn the list screen, instead of the telephone
network information, either a phone book
entry or one of the last 10 outgoing calls
will be displayed.
In order to close the list display,
presst
.
This switches to the telephone main
display.
The following functions are available:
Freq. function:
You can tune to stations via the station
search (
page 41).
Memory function:
You can tune to stations via the station
presets (
page 42).
Setting audio search function
On the multifunction steering wheel,
pressè or ÿ repeatedly until
the
Settings... menu appears in the
multifunction display in the instrument
cluster.
Pressj and switch to the submenu
options.
Press æ or ç and select the
Vehicle menu.
Pressj and select Audio Search
Function
.
By pressing æ or ç, select Freq.
or
Memory.
Audio search functioni
Memory is set at the factory.

29 At a glance
Menu system

Menu system
The menu system allows for easy opera-
tion of COMAND.
Each of the following main functions has a
main menu:
Audio
(Radio, Single CD, MP3, CD changer*
and AUX mode)
Satellite radio*
Telephone*
Navigation*
Service
Opening main menus
Audio (page 38):
Press -.
Satellite radio* (page 77):
Press ;.
Telephone* (page 92):
Press 1.
Navigation* (page 112):
Press 4.
Service (page 161):
Press <.
Menu display
A display can be composed of 3 sections.
Example: Radio main menu
1Soft key sections
2Main area
3Status bar
The functions currently assigned to the
soft keys are displayed in the soft key sec-
tions 1.Messages or settings are displayed in the
main area 2.
The settings can be changed by operating
controls accordingly.
The status bar 3 is divided into three ar-
eas.
Left side:
The selected operating mode is given. In
this example: Radio
Center:
Indication of the selected operating mode.
In this example:
FM = selected waveband
1 = selected station is stored on
preset 1
i
A maximum of five soft keys may be
displayed on each side of the main area
2.

30 At a glance
Menu system
Right side:
General status information is displayed, re-
gardless of the selected operating mode.
In this example (
page 29):
ROAMING = telephone* is logged into a
mobile communications network out-
side your home network.
 = telephone* signal strength
Menu functions and submenus
Using the soft keys you can switch func-
tions ON or OFF or open submenus.
Example: Radio main menu:
The Scan soft key switches the scan
search ON or OFF.
The Autost. soft key opens the sub-
menu for the Autostore settings.
In some situations, soft keys may not have
any function and thus not be available.
Should a soft key not be available, it will
appear shaded out, its characters will ap-
pear white.
Example:
Presets, Scan and Autost. soft key.Exiting from submenus
You can exit the current submenu by
pressing the
Back soft key. The display
switches to the next higher menu level.
The system does not accept setting modi-
fications which have not been stored.
There are exceptions where pressing the
Back soft key will also store new settings.
These exceptions, whenever applicable,
are referenced on the following pages.
i
This information is also displayed in
Navigation* mode (only in map dis-
plays).

34 At a glance
Quick reference COMAND
Press# or $:
The cursor moves horizontally, adjust-
ing bass or treble accordingly.
Storing new settings:
Press' or the Back soft key,
or
wait until the display changes.
If the vehicle is equipped with a sound sys-
tem*, the sound functions are available for
the following operating modes:
Radio
Single CD
MP3
CD changer*
AUX
Satellite radio*The following sound functions are avail-
able:
Default Settings
Resets the sound functions* to the fac-
tory setting.
Standard
Normal stereo playback.
Speech
P l a y b a c k o p t i m i z e d f o r s p e e c h c o m p r e -
hension.
LOGIC7 Surround
7-channel-surround playback (not for
mono-sources like AM waveband or
Weather Band in radio mode).
Different sound functions* can be activat-
ed for each one of the operating modes.
Example:
For CD mode: the
LOGIC7 Surround function,
for Satellite radio* mode: the
Speech func-
tion.Switching sound functions*
Open the main menu of the appropriate
operating mode (
page 29).
Press the Sound soft key.
The Sound menu appears.
Use% or & to select the desired
function.
Press'.
The system switches to the selected
function.
Sound functions*

40 Audio
Radio operation
Open the Audio main menu
(
page 38).
Press the Radio soft key.
The R adio main m enu appea rs. The sta-
tion last tuned to will begin to play. In this example:
Weather Band
Channel 1 = current station
Press the FM/AM soft key in the Radio
main menu.
The main menu for either the FM or AM
waveband appears. The station last
tuned to will begin to play.The waveband is indicated in the center
of the status bar.
In this example:
FM = FM waveband
1 = selected station is stored on
preset 1 (
page 46).
Safety instructions
WarningG
In order to avoid distraction which could
lead to an accident, the driver should enter
system settings with the vehicle at a stand-
still and operate the audio system only when
road, weather and traffic conditions permit.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
Switching to Radio mode
Switching wavebands