MINI Hardtop 4 Door 2017 Owner's Manual

Overview
Button
in
the
vehicle
Park assistance button
Ultrasound
sensors
The ultrasound sensors for measuring parking
spaces are located on the wheel housing.
Functional
requirements
Ultrasound
sensors Ensure full functionality:
'

Indicator
on
the
Control
Display
System
activated/deactivatedSymbolMeaning Gray: the system is not available.
White: the system is available but not activated. The system is activated.
Parking
space
search
and
system
status
'

'

Tire
sizeThe parking position may vary depending on
the tire size.
Malfunction A Check Control message is displayed.
The parking assistant failed. Have the system checked by a dealer

Climate
controlVehicle
features
and
op

Climate
control
functions
in
detail
Switching
the
system
on/off Switching
on
Set any air volume.
Switching
off Turn wheel for air quantity to the
left until the control switches off.
Temperature
Concept
The system provides heat depending on the desired temperature.
Settings Turn the ring to set the desired
temperature.
Air
conditioning
Concept
The air in the vehicle's interior will be cooled and dehumidified and, depending on the tem~ perature setting, warmed again.
The vehicle's interior can only be cooled with
the engine running.
Switching
on/off Press button.
Air conditioning is switched on or off.
Depending on the weather, the windshield may
fog up briefly when the engine is started.The air conditioner produces condensation wa~
ter, refer to page 174, that will exit from below
the vehicle.
Recirculated-air
mode Concept
You may react to unpleasant odors or pollu~ tants in the immediate environment by tempo~ rarily suspending the supply of outside air. The
system then recirculates the air flow within the
vehicle.
Operation Press button repeatedly to select anoperating mode:'

The air flow from the air conditioner may be re~duced automatically to save battery power.
Controlling
the
air
distribution
manually
Concept
The air distribution for climate control can be adjusted manually.
Operation Turn the wheel to select the de~
sired program or the desired in~ termediate setting.'

Automatic
climate
control1Temperature, left2Display3Air flow, AUTO intensity4AUTO program5Air distribution, manual6Display7Temperature, right8Seat heating, rightps539Maximum cooling10Air conditioning11Recirculated-air mode12Rear window defroster13Windshield defroster14Defrosting windows and removing conden~
sation15Seat heating, leftps 53Climate
control
functions
in
detail
Switching
the
system
on/off Switching
on
Set any air volume.Switching
off
Turn wheel for air quantity to the
left until the control switches off.
Temperature Concept
The automatic climate control achieves the set temperature as quickly as possible, if necessarySeite 148CONTROLSClimate
control148
Online Edition for Part no. 01 40 2 915 044 - X/16

by using the maximum cooling or heating
power, and then keeps it constant.
Settings Turn the ring to set the desired
temperature.
The automatic climate control reaches this temperature as quickly as possible, if needed,
by increasing the cooling or heating output, and then keeps it constant.
Do not rapidly switch between different tem~
perature settings. The automatic climate con~
trol will not have sufficient time to adjust the
set temperature.
Air
conditioning
Concept
The air in the vehicle's interior will be cooled
and dehumidified and, depending on the tem~
perature setting, warmed again.
The vehicle's interior can only be cooled with
the engine running.
Switching
on/off Press button.
Air conditioning is switched on or off.
Depending on the weather, the windshield may
fog up briefly when the engine is started.
The cooling function is switched on automati~ cally with the AUTO program.
When using the automatic climate control, con~
densation water, refer to page 174, develops
and drains underneath the vehicle. This is nor~
mal.Maximum
cooling
Concept
The system is set to the lowest temperature,
maximum air flow and recirculated-air mode.
General
information
The function is available with external tempera~
tures beyond approx. 32 

Intensity
With the AUTO program activated, the auto~
matic intensity control can be changed.
Turn the ring to set the desired
intensity from soft to intensive.
The set intensity is displayed via the position of the illuminated LED segment.
Recirculated-air
mode
Concept
You may react to unpleasant odors or pollu~
tants in the immediate environment by tempo~
rarily suspending the supply of outside air. The
system then recirculates the air flow within the
vehicle.
Operation Press button repeatedly to select an
operating mode:'