MITSUBISHI L200 2019 Owner's Manual (in English)

NOTEzWhen connecting a USB device, use a con-
nection cable. Failure to use a connection ca-
ble when connecting may place undue load
on, or damage the USB connector.
z Set up the device in order that no unsafe ac-
tions, such as plugging in the connection ca-ble are taken while driving.
z When inserting and removing the USB de-
vice, for safety’s sake first stop the vehicle.
z Do not insert other than audio devices into
the USB port. Damage to the device or
equipment may result.
z Depending on the status of the USB device,
it may take some time until the device is rec-
ognized, or playback starts.
z Buttons on the product will not operate
while USB device is connected.
z USB device specifications and settings may
mean that connection is not possible, or re- sult in differences in operation or display.
z Depending on audio data in the USB device,
track information may not be displayed cor-
rectly.
z Depending on the status of the vehicle and
device, the iPod/iPhone may not play back after starting the engine.
z Data containing copyright information may
not play back.
z This product can play back MP3, WMA, and
AAC format audio files.
z Depending on the type of USB device, usage
may not be possible, or functions that can beused may be restricted.
z The recommended file system for USB
memory is FAT32.NOTEz The maximum supported capacity for USB
memory is 32GB.
z Operate the USB device containing recorded
audio files while connected to this product.
Play Back of Audio Files on a
USB Device
Press the MEDIA key to set

USB as the source. The selected source is in- dicated on the display.
Select the Track (File)
Press the key or key to select the
track.

This enables selection of the next or previous
track.
Fast Forward or Rewind
Hold down the 3 key or the 4 key.

Fast forward/rewind is possible.
Switch Playback Mode
Repeat playback, random playback, and scan
playback are possible.
Repeat Playback (RPT)
Press the 1RPT key.

Repeat playback of the track currently being
played.
NOTEz Pressing again will cancel.
z Selecting a file will cancel this.
Folder Repeat Playback
Hold down the 1RPT key.

Repeat playback of the tracks within the fold- er currently being played.
NOTEz Pressing again will cancel.
z Even if the file is selected, folder repeat
playback will not be cancelled.
Folder Random Playback
(RDM)
Press the 2RDM key.

Play tracks in the folder currently being
played in a random order.
Listen to Audio Files on a USB Device
7-572.7((For pleasant driving7

NOTEzPressing again will cancel.
z Even if the file is selected, folder random
playback will not be cancelled.
All Folder Random Playback
Hold down the 2RDM key.

Play the tracks in all folders in a random or-
der.
NOTEz Pressing again will cancel.
z Even if the file is selected, all folder random
playback will not be cancelled.
Scan Playback (SCAN)
Press the PTY/SCAN key.

Play the first 10 seconds of each of the tracks
on the whole USB device in order.
NOTEz Press this button again during playback if
you wish to hear that track, and that trackwill play normally.
Folder Scan Playback
Hold down the PTY/SCAN key.

Play the first 10 seconds of the first track in
each folder on the USB device in order.NOTEz Press this button again during playback if
you wish to hear that track, and that trackwill play normally.
Search Tracks
Search folders and files, and select a track.
1. Turn the
/SEL key to select the folder.
2. Press the
/SEL key.

Files within the selected folder are dis- played.
3. Turn the
/SEL key to select the file.
4. Press the
/SEL key.

This plays the selected file (track).
NOTEz While the folder is selected, press the 6 key to cancel track search mode.
z If there is no operation for 10 seconds after
selecting the folder, then track search mode will be cancelled.
z Select the folder, and hold down the
/SEL
key to start playback from the first track in
that folder.
NOTEz While the file is selected, press the 6 key
to return to the previous operation.
z While the file is selected, hold down the 6
key to cancel track search mode.
z If there is no operation for five seconds after
selecting the file, that file is played back.
z Operations such as selecting a track will
cancel track search mode.
To play iPod/USB memory
device tracks via voice
operation (vehicles with
Bluetooth

Preparation for voice operation
To use the voice operation, press theSPEECH button (A) first.
To search by artist name
1. Say “Play” on the main menu.
NOTEz The Bluetooth

NOTEzThe Bluetooth

6.After the voice guide says “Playing
<playlist>,” the system creates an index for the playlist.NOTEz If the confirmation function is active, the
voice guide confirms if the playlist name is
correct. If the playlist name is correct, say
“Yes”. If not, say “No”. After the voice guide says “Playlist not found, please try
again,” the system returns to step 2. Refer to “Confirmation function setting” on page 7-77.
7. The system exits the voice recognition
mode and starts playback.
To search by genre
1. Say “Play” on the main menu.
NOTEz The Bluetooth

NOTEzDepending on the type of Bluetooth-capable
audio devices, usage may not be possible, or
functions that can be used may be restricted.
z Confirm together with the user manuals for
the commercially-available Bluetooth-capa-
ble audio devices.
z Depending on the type of Bluetooth-capable
audio devices, volume levels may differ.
There is the danger of loud volumes, so prior to use, it is recommended that you turn the
volume down.

W “Adjust Volume” (P.7-47)
z Depending on the status of the Bluetooth au-
dio device, it may take some time until the
device is recognized, or playback starts.
z Bluetooth audio device specifications and
settings may mean that connection is not
possible, or result in differences in operation or display.
z Depending on audio data in the Bluetooth
audio device, track information may not be
displayed correctly.
z Depending on the status of the vehicle and
device, the iPod/iPhone may not play back after starting the engine.
Connect a Bluetooth-capable
Audio Device
Regarding how to connect your Bluetooth de-
vice, refer to “Connecting the Bluetooth

NOTEzPressing again will cancel.
Scan Playback (SCAN)
Press the PTY/SCAN key.

Play the first 10 seconds of each of the tracks
on the whole Bluetooth Audio device in or- der.
NOTEz Press this button again during playback if
you wish to hear that track, and that trackwill play normally.
Listen to Bluetooth Audio*
7-632.7((For pleasant driving7

Display Indicator
This explains content of the display indicator.

Change the Display Mode
You can change the content of the display in-
dicator.
Press the DISP key to switch the display con- tent.

Each time the DISP key is pressed, the dis- play content changes.
CAUT,ONz The operation of changing display contents
may impede safe driving, therefore check safety before operation.NOTEz Up to 11 characters may be displayed at one
time. To display 12 or more characters, press
the PAGE key, and subsequent characters
will be displayed.During DAB Reception*
This switches in the order “Service name”,
“Ensemble name”, and “CH no. (CH ID)”.
NOTEz If the text information for the service name
and ensemble name cannot be obtained, then
nothing is displayed.
Display Indicator
7-642.7((For pleasant driving7

During CD-DA playback
This switches in the order “Disc title”, “Track
title”, and “Operating status”.
NOTEz If there is no text information to display,
then “NO TITLE” is displayed.
During MP3/WMA/AAC Play-
back
This switches in the order “Folder title”,
“File title”, and “Operating status”.
NOTEz If there is no text information to display,
then “NO TITLE” is displayed.
Display the ID3tag
Hold down the DISP key.

This switches the ID3tag display.
[DISP@ Each time the key is pressed, this
switches in the order “Album name”, “Track name”, “Artist name”, “Genre name”*, and “Operating status”.
*:Displayed when playing back audio
files on a USB device (vehicles with a
Bluetooth

Adjust-ment
itemsTurn counter- clockwiseTurn clockwise
BAL-
ANCELEFT 11 to
CENTER
(emphasise
LEFT)CENTER to
RIGHT 11
(emphasise
RIGHT)SCVOFF, LOW
(SCV effect is
OFF/low)MID, HIGH
(SCV effect is
middle/high)System Settings
Change system settings such as product time. 1. Press the MENU key.
2. Press the
/SEL key to select settings
items.

Each time the
/SEL key is pressed,
this switches in the order DAB setting *1
,
Gracenote DB *2
, AF, REG, TP-S, PI-S,
PTY language settings, PHONE settings,
CT Adjust time, and Cancel.
3. Turn the
/SEL key to set.
*1 Displayed when a DAB tuner is connected.
*2 Displayed when playing back audio files
(vehicles with a Bluetooth