MITSUBISHI L200 2020 Owner's Manual (in English)

ScreenCauseSolution (Reference)zWhen the Ultrasonic misacceleration Mit-
igation System (UMS) is ON and the rear
differential lock switch is set to ON, the
Ultrasonic misacceleration Mitigation
System (UMS) will be switched to OFF
automatically.
z When the Ultrasonic misacceleration Mit-
igation System (UMS) is OFF, even if the FCM and UMS ON/OFF switch is press-
ed, the Ultrasonic misacceleration Mitiga-
tion System (UMS) will not be switched to ON because the rear differential lock
switch is ON.z Refer to
“When the UMS is not available”
on page 6-106.z When the Ultrasonic misacceleration Mit-
igation System (UMS) is ON, if the Hill
Descent Control (HDC) is set to ON, the
Ultrasonic misacceleration Mitigation System (UMS) will be switched to OFF
automatically.
z When the Ultrasonic misacceleration Mit-
igation System (UMS) is OFF, even if the FCM and UMS ON/OFF switch is press-
ed, the Ultrasonic misacceleration Mitiga- tion System (UMS) will not be switched
to ON because the Hill Descent Control
(HDC) operates.z Refer to
“When the UMS is not available”
on page 6-106.
Indication lamp, warning lamp, and information screen display list (multi information display - Type 1)
5-412.7(20(1Instruments and controls5

ScreenCauseSolution (Reference)zThe Blind Spot Warning (BSW) sensor is
temporarily not available for some reason such as the environmental condition or in-crease of the sensor temperature.z When the warning display does not disap-
pear after waiting for a while, contact a
MITSUBISHI MOTORS Authorized
Service Point.
Refer to “When the sensor is temporarily
not available” on page 6-110.z The Blind Spot Warning (BSW) does not
operate normally because there are some malfunctions in the sensor or the system.z We recommend you to have it checked,
immediately.
Refer to “When there is a malfunction in
the system or the sensor” on page 6-109.z Foreign objects, such as dirt, snow or ice,
adhere to the bumper surface around the sensor.z Remove a foreign object on the bumper
surface around the sensor.
When the warning display does not disap- pear after having cleaned the bumper sur-face around the sensor, contact a
MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Blind Spot Warning (BSW):
When there is a foreign objects on the
sensor” on page 6-110.z The Rear Cross Traffic Alert (RCTA) has
detected a vehicle that is approaching
your vehicle.z Pay special attention to the rear of your
vehicle.
Refer to “Rear Cross Traffic Alert (RCTA)” on page 6-110.
Indication lamp, warning lamp, and information screen display list (multi information display - Type 1)
5-422.7(20(1Instruments and controls5

ScreenCauseSolution (Reference)zThe Lane Departure Warning (LDW) has
detected that your vehicle is about to
leave or has left the lane.z Refer to “Lane departure warning” on
page 6-114.z There is a fault in the Lane Departure
Warning (LDW).z We recommend you to have it checked.
Refer to “LDW deactivation due to fault”
on page 6-114.z The engine is overheated.zStop the vehicle in a safe place and take
corrective measures.
Refer to “Engine overheating” on page 8-09.z There is a fault in the sensor.zWe recommend you to contact a
MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Forward Collision Mitigation
system (FCM): When a problem is detec- ted” on page 6-95.
Refer to “Automatic High-Beam (AHB):
System problem warning” on page 5-60.
Indication lamp, warning lamp, and information screen display list (multi information display - Type 1)
5-432.7(20(1Instruments and controls5

ScreenCauseSolution (Reference)zThe Forward Collision Mitigation system
(FCM) and Automatic High-Beam (AHB)
is temporarily unavailable due to the high
or low temperature of the sensor.z After the temperature of the sensor has
been in range, the system will automati-
cally return to operation.
Refer to “Forward Collision Mitigation system (FCM): When a problem is detec-
ted” on page 6-95.
Refer to “Automatic High-Beam (AHB): System problem warning” on page 5-60.z The sensor is temporarily unavailable due
to conditions such as the adhesion of con- taminants to the sensor or windscreen.This is not a malfunction.z Refer to “Forward Collision Mitigation
system (FCM): When a problem is detec- ted” on page 6-95.
Refer to “Automatic High-Beam (AHB): System problem warning” on page 5-60.z There is a fault in the Automatic High
Beam (AHB).z We recommend you to contact a
MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Automatic High-Beam (AHB): System problem warning” on page 5-60.z More than specified limit water has accu-
mulated in the fuel filter.z Refer to “Removal of water from the fuel
filter” on page 8-11.

Indication lamp, warning lamp, and information screen display list (multi information display - Type 1)
5-442.7(20(1Instruments and controls5

Other interrupt displaysScreenSystem operation statusReferencezWhen starting the engine, you pressed the
engine switch without depressing the
clutch pedal (M/T).z Place the gearshift lever in the “N” (Neu-
tral) position, fully depress the clutch ped-al, depress the brake pedal with the rightfoot. Then, press the engine switch.Refer to “Starting the engine” on page 6-18.z When starting the engine, the selector lev-
er is in a position other than the “P”
(PARK) or the “N” (NEUTRAL) position,
or you pressed the engine switch without depressing the brake pedal (A/T).z Place the selector lever in the “P” (Park)
position, depress the brake pedal with the
right foot. Then, press the engine switch.
Refer to “Starting the engine” on page 6-18.
The operation status of each system is displayed on the information screen. Refer to the appropriate page for the system for further details.
ScreenSystem operation statusReferencez When the drive mode is shifted by operat-
ing the drive mode-selector.z Refer to “Easy Select 4WD” on page
6-37.
Refer to “Super Select 4WD B

ScreenSystem operation statusReferencezWhen “MUD/SNOW” mode of Off Road
mode is selected.z Refer to “Control mode” on page 6-52.zWhen “SAND” mode of Off Road mode
is selected.z Refer to“Control mode” on page 6-52.zWhen “GRAVEL” mode of Off Road
mode is selected.z Refer to “Control mode” on page 6-52.zWhen the Forward Collision Mitigation
system (FCM) is deactivated.z Refer to “FCM and UMS ON/OFF switch”
on page 6-94.z When the Ultrasonic misacceleration Mit-
igation System (UMS) is deactivated.z When the Forward Collision Mitigation
system (FCM) is activated or the timing of an alarm is changed.z Refer to “FCM and UMS ON/OFF switch”
on page 6-94.
Indication lamp, warning lamp, and information screen display list (multi information display - Type 1)
5-462.7(20(1Instruments and controls5

ScreenSystem operation statusReferencezWhen the reversing sensor system detects
an obstruction.z Refer to “To operate” on page 6-121.zWhen the sensor system detects an ob-
struction.z Refer to “To operate” on page 6-121.
This informs you that a periodic inspection is due.
ScreenSolutionWe recommend you to have it checked. Refer to “Service reminder” on page 5-09.
Indication lamp, warning lamp, and information screen display list (multi information display - Type 1)
5-472.7(20(1Instruments and controls5

The setting for rest interval can be changed.ScreenSolutionStop the vehicle in a safe place, turn off the engine, and take a rest.Use this display as rough guide for taking rests during a long drive.
The interval from the start of your trip until this message is displayed can be set. Refer to “Changing the time until “REST REMINDER” is displayed” on page 5-16.The display and buzzer alert the driver when the set time is reached. If you continue
to drive without having a rest, the buzzer sounds approximately every 5 minutes to
encourage you to take a rest.
z In the following cases, the time driven is reset and the display returns to the pre-
vious display screen. After this, when the set time is reached again, the buzzer and display encourage you to take a rest.

Indication and warning lamps (multi information display - Type 2)1- Front fog lamp indication lamp*o p. 5-50
2- Turn-signal indication lamps/Hazard warning indication lamps o p. 5-50
3- High-beam indication lamp o p. 5-50
4- 2WD/4WD operation indication lamp o p. 6-41
5- Rear differential lock indication lamp o p. 6-55
6- Low-range indication lamp* o p. 6-41
7- Position lamp indication lamp* o p. 5-50
8- Rear fog lamp indication lamp o p. 5-509- Engine oil level warning lamp/Diesel
particulate filter (DPF) warning lamp
If this lamp blinks, refer to “Engine oil
level warning lamp” o p. 5-53
If this lamp illuminates, refer to “Diesel
particulate filter (DPF)” o p. 6-21
10- Diesel preheat indication lamp o p. 5-50
11- Charge warning lamp o p. 5-52
12- Check engine warning lamp o p. 5-52
13- Fuel filter indication lamp o p. 5-51
14- Oil pressure warning lamp o p. 5-52
15- Washer fluid level warning lamp o p. 5-5316- Multi information display o p. 5-17
17- Door ajar warning lamp o p. 5-53
18- Seat belt reminder/warning lamp o p. 4-08
19- Anti-lock brake system (ABS) warning lamp o p. 6-74
20- Active Stability & Traction Control (ASTC) indication lamp o p. 6-78
21- Active Stability & Traction Control (ASTC) OFF indication lamp
o p. 6-78
22- Supplement Restraint System (SRS) warning lamp o p. 4-34
23- Brake warning lamp o p. 5-51
Indication and warning lamps (multi information display - Type 2)
5-492.7(20(1Instruments and controls5

Indication lampsTurn-signal indication lamps/Hazard warning indication lamps
These indication lamps blink in the following situations.
z When the turn-signal
lever is moved to acti- vate a turn-signal lamp.
Refer to “Turn-signal
lever” on page 5-62.
z When the hazard warning flasher switch
is pressed to activate the hazard warning lamps.
Refer to “Hazard warning flasher switch” on page 5-62.
z When the hazard warning lamps auto-
matically activate due to sudden braking
while driving (vehicles equipped with
the emergency stop signal system).
Refer to “Emergency stop signal sys- tem” on page 6-72.
High-beam indication lamp
This indication lamp illumi-
nates when the high-beam is
used.
Front fog lamp indication
lamp*
This lamp illuminates while
the front fog lamps are on.
Rear fog lamp indication
lamp*
This lamp illuminates while
the rear fog lamp is on.
Position lamp indication lamp*
This indication lamp illumi-
nates while the position
lamps are on.
Diesel preheat indication lamp
This indicates the glow plug
preheat condition.
[Except for vehicles equip-
ped with keyless operation system@
When the ignition switch is
turned to the “ON” position, the lamp illumi-
nates. As the glow plug becomes hot, the lamp goes out and the engine can be started.
[For vehicles equipped with keyless opera-
tion system@
When the operation mode is put in ON, the
lamp illuminates and preheating of the glow plug starts automatically. As the glow plug
becomes hot, the lamp goes out and the en-
gine starts.
CAUT,ONz If the diesel preheat indication lamp comes
on after the engine is started, the engine speed may not rise above the idling speedbecause of fuel freezing. In this case, keep
the engine idling for about 10 minutes, then turn off the ignition switch or put in OFF the operation mode, and immediately turn it on
or put in ON again to confirm that the diesel preheat indication lamp is off.
Indication lamps
5-502.7(20(1Instruments and controls5