brakes MITSUBISHI LANCER EVOLUTION X 2008 Workshop Manual

Page 198 of 241

36-1
GROUP 36
PARKING BRAKES
CONTENTS
GENERAL INFORMATION . . . . . . . .36-2

Page 199 of 241

GENERAL INFORMATION
PARKING BRAKES36-2
GENERAL INFORMATIONM2360000100753
A parking brake lever is used to operate the mechan-
ical rear-wheel acting type parking brake.
CONSTRUCTION DIAGRAM
<Vehicles with rear drum brake>
<Vehicles with rear disc brake>
AC609233
Parking brake leverParking brake rear cable
AC
AC609235
AC609234
Parking brake leverParking brake rear cable
AB
<Vehicles with 16-inch wheel> <Vehicles with 18-inch wheel>

Page 201 of 241

GENERAL
BASIC BRAKE SYSTEM35A-2
GENERALM2350000100956
Brake systems with higher reliability and durability
have achieved distinguished braking performance.
FEATURES
.
IMPROVEMENT OF BRAKING PERFOR-
MANCE
•A 10-inch single brake booster with the variable
boost ratio mechanism has been used to assure
maximum braking force with less pedal pressure
in case of emergency. <Vehicles with ABS>
•In addition to the 10-inch single brake booster, a
small and long stroke-type master cylinder has
been adopted to achieve downsizing and secure
assist force.
•15-inch or 16-inch ventilated disc brakes have
been adopted for the front.
•8-inch leading trailing-type drum brake, 14-inch
or 16-inch solid disc brake has been adopted for
the rear.
.
IMPROVEMENT IN SAFETY
•The 4-wheel anti-lock brake system (4ABS) has
been installed to prevent slippage resulting from
the wheel lock and assure stable vehicle posture
and driveability.<Vehicles with ABS>
•A rear wheel early lock-prevention proportioning
valve has been used. <Vehicles without ABS>
•Electronic control braking force distribution sys-
tem (EBD) has been adopted to assure the maxi-
mum braking force independently of the
passenger's position in the vehicle. <Vehicles
with ABS>
•X-type piping of brake lines have been adopted
for the front and rear wheels.
•Audible wear indicators are used on the front and
rear brake pads to warn the driver of wear limit.
.
SERVICE QUALITY IMPROVEMENTS
•Diagnostic function has been adopted to ABS for
easier inspection. <Vehicles with ABS>
•Brake fluid reservoir, master cylinder, and brake
booster have been integrated for downsizing and
better serviceability.

Page 207 of 241

CONSTRUCTION DESCRIPTION
BASIC BRAKE SYSTEM35A-8
FRONT BRAKEM2350003000602
Brakes with the following specifications have been
adopted for the front brakes.
•The 1-piston ventilate disc brake (V5-S57 <Vehi-
cles with 16-inch wheel> or V6-S57 <Vehicles
with 18-inch wheel>) has been adopted.
•An audible wear indicator that informs the driver
of application limit has been adopted onto the
front brake LH pads.
•The outer disc type brake disc which can be tight-
ened together with the wheel has been intro-
duced for better serviceability.
.
DISC BRAKE DESIGNATION
AC609316
AC201769
Wear indicator Brake discPad Normal
AB
At wear limit
<15-inch disc brake (V5-S57)>
<16-inch disc brake (V6-S57)>
No.ItemContents
1Brake disc typeV: Ventilated
S: Solid
2Brake size
(Minimum applicable
disc wheel)
4: 14"
5: 15"
6: 16"
3Number of pistonsS: 1 (Floating type)
4Piston size
(Rounded integral
value)
35: φ 34.9 mm
57: φ 57.1 mm
V 6 - S 57
1 2 3 4
AC505124

Page 208 of 241

CONSTRUCTION DESCRIPTION
BASIC BRAKE SYSTEM35A-9
REAR BRAKEM2350004000616
<Vehicles with rear drum brake>
8-inch leading trailing-type drum brakes have been
adopted for the rear brakes in order to provide stable
braking force at all times both when moving forward
and reverse.
<Vehicles with rear disc brake>
Brakes with the following specifications have been
adopted for the rear.
•The 1-piston solid disc brake (S4-S35 <Vehicles
with 16-inch wheel> or S6-S35 <Vehicles with
18-inch wheel>) has been adopted.
*
•An audible wear indicator that informs the driver
of application limit has been adopted onto the
brake pads.
•The outer disc type brake disc which can be tight-
ened together with the wheel has been intro-
duced for better serviceability.
NOTE: *For the brake disc name, refer to FRONT
BRAKE
P.35A-8.
AC609282
AC609315
AC201769
Wear indicator Brake discPad Normal
AB
At wear limit
<16-inch disc brake (S6-S35)> <14-inch disc brake (S4-S35)>