display MITSUBISHI MIRAGE 2014 6.G Workshop Manual

Comfort controls
5-51
5
USB control panel and display
N00763900063
To play from a USB memory device
N00764000087
1. Press the PWR switch to turn on the audio system. The
system turns on in the last mode used.
2. Connect your USB memory device to the USB input ter-
minal.
Refer to “How to connect a USB memory device” on page
3-154.
3. Press the CD button several times to switch to the USB
mode. The input mode changes as follows every time the
CD button is pressed: CD mode → USB mode →Blue-
tooth
® mode (if so equipped) → AUX mode → CD mode.
The USB indicator are illuminated and then the USB
mode will be activated.
4. Once the device is selected, playback starts and indica-
tor appears on the display.
NOTE
Depending on the condition of your USB device, it may
take a longer time before the playback starts.
5. To stop the playback, press the RADIO button or CD but-
ton to switch to a different mode.NOTE
To adjust the volume and tone, refer to “To adjust the vol-
ume” on page 5-30 and “To adjust the tone” on page 5-31.
1- CD (Mode changeover) button
2- RADIO button
3-
DISP (Title display)/ (Return) button
4-
(USB device active) indicator
5- USB indicator
6- Display
7- TRACK indicator
8- RPT (Repeat mode)/F-RPT (Folder repeat mode) indicator
9- RDM (Random mode)/F-RDM (Folder random mode) indi-
cator
10- SEL (Select) indicator
11- PAGE (Title scroll) button
12-
(Fast-reverse/Track down) button
13-
(Fast-forward/Track up) button
14- PWR (On-Off)/SEL (Select) switch
15- RPT (Repeat) button
16- RDM (Random) button
BK0162600US.book 51 ページ ２０１３年３月２２日　金曜日　午後２時４１分

Comfort controls
5-53
5
To fast-forward/reverse the track
N00764200034
To fast-forward/reverse the current track, press the button
or button.
Fast-forward
To fast-forward the current track, press the button. While
the button is kept pressed, the track will be fast-forwarded.
Fast-reverse
To fast-reverse the current track, press the button. While
the button is kept pressed, the track will be fast-reversed.To s e l e c t a f i l e
N00764300035
Tr a c k u p
Press the button repeatedly until the desired file number
appears on the display.
Tr a c k d o w n
Press the button repeatedly until the desired file number
appears on the display.NOTE
Pressing the button once during the song will cause
the audio system to restart playback from the beginning of
the file.
To find a file
N00703100012
Operate the SEL switch to select desired file.
When this mode is activated by pressing the SEL switch, the
SEL indicator will be displayed in the display.NOTE
To cancel the selection, press the button to return to the
previous step.

If no operation is performed for 10 seconds or more or
other button is operated after the SEL switch has been
turned, searching of the desired file is canceled.

If no operation is performed for 5 seconds or more after
the file is displayed, playback starts.

When the SEL indicator is not shown on the display and
the SEL switch is operated, the volume adjustment is acti-
vated.Press the SEL switch : To start this mode or to select the folder
or file.
Turn the SEL switch : To show the folder or file.
BK0162600US.book 53 ページ ２０１３年３月２２日　金曜日　午後２時４１分

5-54 Comfort controls
5
To play the same file repeatedly
N00764500024
Press the RPT button to show “RPT” in the display. To cancel
this mode, press the button again.To play the files in the same folder repeatedly
N00764600038
Press and hold the RPT button until you hear a beep to show
“F-RPT” in the display.
All tracks in the current folder are played repeatedly.
To exit this mode, press the button again.To play a folder in random order
N00764700039
Press the RDM button to show “F-RDM” in the display.
The audio randomly selects tracks from the current folder and
plays the selected tracks.
To exit this mode, press the button again.To play all folders in random order
N00764800030
Press and hold the RDM button until you hear a beep to show
“RDM” in the display.
The audio randomly selects tracks from all folders and plays
the selected tracks.
To exit this mode, press the button again.
To switch the display
N00765100043
You can displays titles with tag information.
Folder title
The display changes as follows every time the DISP button is
pressed during playback: Folder name → File name → Normal
display.
Tag information
1. Press and hold the DISP button until you hear a beep.
2. The display changes as follows every time the DISP but-
ton is pressed briefly: Album TAG → Track TAG → Art-
ist TAG → Genre TAG (vehicles with Bluetooth
® 2.0
interface) → Normal display.
NOTE
Press and hold the DISP button again until you hear a
beep, and the tag information display returns to the folder
title display.

Up to 11 characters are shown in the display at once. If the
title is cut off in the middle, press the PAGE button. The
next characters are displayed every time this button is
pressed.

If no title is stored, “NO TITLE” is shown in the display.

Characters that cannot be displayed are substituted by
“•”.
BK0162600US.book 54 ページ ２０１３年３月２２日　金曜日　午後２時４１分

5-56 Comfort controls
5To play tracks from a Bluetooth
® device
(vehicles with Bluetooth
® 2.0 interface)
N00765300104
You can wirelessly connect a digital audio player or cellular
phone supporting Bluetooth
® to listen to the tracks on the con-
nected device.
Refer to “Bluetooth
® 2.0 interface” for the connecting method,
etc. on page 3-128.
The following explains the basic playback method.
NOTE
Depending on the connected device, operation of the con-
nected device is limited to its available functions.

Depending on the connected device, the device may not
operate correctly.

A file protected by copyright might not be able to play-
back.

It is recommended to adjust the equaliser of the connected
device to 0 db or neutral.

The voice operation is not available to access music files
on the connected Bluetooth
® device.
Bluetooth
® device control panel and display
N00765400062
1- CD (Mode changeover) button
2- PWR (On-Off) switch
3-
BT (Bluetooth
®) indicator
4- TRACK indicator
5- Display
6- PAGE (Title scroll) button
7-
(Fast-reverse/Track down) button
8-
(Fast-forward/Track up) button
9- DISP (Title display) button
10- Play/Pause button
11- Stop button
12- RPT (Repeat) button
13- RDM (Random) button
BK0162600US.book 56 ページ ２０１３年３月２２日　金曜日　午後２時４１分

Comfort controls
5-57
5
To listen to tracks from a device connected via
Bluetooth
®
N00765500089
1. Press the PWR switch to turn on the audio system. The
system turns on in the last mode used.
2. Press the CD button several times to switch to the BT-A
(Bluetooth
®) mode. The input mode changes as follows
every time the CD button is pressed: CD mode → iPod
mode → Bluetooth
® mode (if so equipped) → AUX mode
→ CD mode.
The BT indicator are illuminated and then the BT-A mode
will be activated.
3. Connect your Bluetooth
® device.
Refer to “Connecting the Bluetooth
® 2.0 interface and
Bluetooth
® device” on page 3-135.
4. Playback starts automatically.
NOTE
Depending on the connected device, the playback may not
start automatically.
In this case, operate the connected device to start the play-
back.To stop the playback (if supported by the device)
N00765600035
To stop the playback, press the Stop button.
To restart the playback, press the Play/Pause button.To pause the playback (if supported by the device)
N00765700036
To pause the playback, press and hold the Play/Pause button
until you hear a beep.To restart the playback, press the Play/Pause button.
To fast-forward/reverse the track (if supported by the
device)
N00703200013
To fast-forward/reverse the current track, press the button
or button.
Fast-forward
To fast-forward the current track, press the button. While
the button is kept pressed, the track will be fast-forwarded.
Fast-reverse
To fast-reverse the current track, press the button. While
the button is kept pressed, the track will be fast-reversed.To select a track (if supported by the device)
N00765800037
Track up
Press the button repeatedly until the desired file number
appears on the display.
Track down
Press the button repeatedly until the desired file number
appears on the display.NOTE
Pressing the button once during the song will cause
the audio system to restart playback from the beginning of
the file.
BK0162600US.book 57 ページ ２０１３年３月２２日　金曜日　午後２時４１分

5-58 Comfort controls
5
To play the same track repeatedly (if supported by the
device)
N00765900038
Press the RPT button several times to switch to show “RPT” in
the display.
The mode changes as follows every time the RPT button is
pressed:
No display (not repeat) → RPT (repeat same track) → F-RPT
(repeat all tracks) → No display
To exit this mode, press the button again.To play the all tracks repeatedly (if supported by the
device)
N00703300014
Press the RPT button several times to switch to show “F-RPT”
in the display.
The mode changes as follows every time the RPT button is
pressed:
No display (not repeat) → RPT (repeat same track) → F-RPT
(repeat all tracks) → No display
All tracks in the Bluetooth
® device are played repeatedly.
To exit this mode, press the button again.
To play tracks in random order (if supported by the
device)
N00766000023
Press the RDM button to show “RDM” in the display.
The system randomly selects and plays tracks from all tracks in
the Bluetooth
® device.
To exit this mode, press the button again.
To switch the display (if supported by the device)
N00766200041
The system can display tag information.
1. Press the DISP button.
2. The display changes as follows every time the DISP but-
ton is pressed:
Album title → Title name → Artist name → Genre
→Normal displayNOTE
Up to 11 characters are shown in the display at once. If the
title is cut off in the middle, press the PAGE button. The
next characters are displayed every time this button is
pressed.

If no title is stored, “NO TITLE” is shown in the display.

Characters that cannot be displayed are substituted by “•”.
BK0162600US.book 58 ページ ２０１３年３月２２日　金曜日　午後２時４１分

5-60 Comfort controls
5Error codes
N00736100780
If an error code appears in the display, take action in accordance with the table below.Audio system
iPod
(if so equipped)Error display
Item
Repair
CHECK DISCDisc is not loaded correctly, or condensation
on disc.Insert disc with label facing up.
Remove moisture from disc.
DISC ERRORDisc is dirty, scratched, or deformed; or exces-
sive vehicle vibration.Clean or replace disc. Retry when vibrations stop.
INTERNAL ELoading or eject error. Pick-up is out of posi-
tion.Eject disc and reload. If disc will not eject, bring your
vehicle to your authorized Mitsubishi Motors dealer or a
repair facility of your choice for repair.
HEAT ERROR Internal protection against high temperatures. Allow radio to cool by waiting about 30 minutes.
ERROR DC Foreign material is inside of radio or amplifier.Bring your vehicle to your authorized Mitsubishi Motors
dealer or a repair facility of your choice for repair.
Error display
Item
Repair
NO SONG There are no playable music files. Record music files in the iPod.
VER ERROR The iPod or its software cannot be recognized. Connect a supported iPod.BK0162600US.book 60 ページ ２０１３年３月２２日　金曜日　午後２時４１分

Comfort controls
5-61
5
USB memory device
(if so equipped)
Error display
Item
Repair
FILE ERROR The file cannot be played. The file is protected by copyrights, etc. An error is dis-
played for several seconds, and then the next playable file
is played automatically.
UNSUPPORTED (first) →
DEVICE (after)The USB memory device cannot be recog-
nized. Remove the USB memory device.
UNSUPPORTED (first) →
FORMAT (after)The USB memory device format cannot be
recognized. Remove the USB memory device.
USB BUS PWRAn overcurrent or other power-supply error
has occurred.Remove the USB memory device.
Have the vehicle inspected at an authorized Mitsubishi
Motors dealer or a repair facility of your choice.
LSI ERROR Internal device errors Have the vehicle inspected at an authorized Mitsubishi
Motors dealer or a repair facility of your choice.
BK0162600US.book 61 ページ ２０１３年３月２２日　金曜日　午後２時４１分

Specifications
9-9
9 Capacity
N01148001061
*: similar high quality ethylene glycol based non-silicate, non-amine, non-nitrate and non-borate coolant with long life hybrid
organic acid technology
Item
Capacity
Lubricants
Fuel
(approximate)9.2 gal (35 L) Refer to “Fuel selection” on page 1-2Engine oil
Oil pan 2.9 qt (2.8 L) Engine oils displaying the ILSAC certification mark (“star-
burst” symbol) on the container.
If these oils are not available, an API classification SN or
higher can be used.Oil filter .21 qt (0.2 L)
Manual transaxle 1.7 qt (1.6 L)Mitsubishi Motors Genuine NEW MULTI GEAR OIL ECO
API classification GL-4 SAE 75W-80Continuously variable transmission (CVT) 7.4 qt (7.0 L) Mitsubishi Motors Genuine CVTF - J4Brake As required Conforming to Brake fluid DOT3 or DOT4Hood lock release mechanism and safety catch As required Multipurpose type grease NLGI Grade 2Engine coolant
{Includes .53 qt (0.5 L) in reserve
tank}
M/T 4.2 qt (4.0 L)
Mitsubishi Motors Genuine Super Long Life Coolant Pre-
mium or equivalent*CVT 4.8 qt (4.6 L)
Washer fluid 2.6 qt (2.5 L) —Refrigerant (air conditioning)Refer to the “Air
conditioning label”
on page 9-2.HFC-134a
BK0162600US.book 9 ページ ２０１３年３月２２日　金曜日　午後２時４１分

Alphabetical index
3
F
Floor mat 4-3
Fluid
Brake fluid 9-9
Continuously variable transmission (CVT) fluid 7-15
,9-9
Engine coolant 7-11
,9-9
Manual transaxle 9-9
Washer fluid 7-15
,9-9
Fluid capacities and lubricants 9-9
Free-hand advanced security transmitter (F.A.S.T.-key) 3-13
Front fog lights
Bulb capacity 7-44
Indicators 3-110
Replacement 7-50
Switch 3-120
Front seat adjustment 2-3
Front side-marker lights
Bulb capacity 7-44
Replacement 7-47
Front turn signal light
Bulb capacity 7-44
Replacement 7-48
Fuel
Filling the fuel tank 1-4
Fuel economy 4-2
Fuel hoses 7-31
Fuel remaining warning display 3-103
Fuel selection 1-2Tank capacity 9-9
Fuel remaining display 3-102
Fuses 7-36
Fusible links 7-35
G
General maintenance
Maintenance 7-33
General vehicle data 9-5
Genuine parts 1-9
Glove compartment 3-165
H
Hazard warning flasher switch 3-119
Hazard warning lights 3-110
Head restraints 2-11
Headlights
Bulb capacity 7-44
Dimmer 3-117
Headlight flasher 3-118
Switch 3-114
Heater without air conditioning function 5-6
High beam indicator 3-110
High coolant temperature warning light 3-113
High-mounted stop light
Bulb capacity 7-44
Hill start assist 3-69
Hood lock release mechanism and safety catch 7-34
Hook
BK0162600US.book 3 ページ ２０１３年３月２２日　金曜日　午後２時４１分