MITSUBISHI OUTLANDER PHEV 2020 Owner's Manual (in English)

SPEECH button
zPress this button to change to voice rec-
ognition mode.
While the system is in voice recognition
mode, “Listening” will appear on the au- dio display.
z If you press the button briefly while in
voice recognition mode, it will interrupt
prompting and allow voice command in- put.
Pressing the button longer will deacti-
vate the voice recognition mode.
z Pressing this button briefly during a call
will enable voice recognition and allow
voice command input.
PICK-UP button
z Press this button when an incoming call
is received to answer the telephone.
z When another call is received during a
call, press this button to put the first call-
er on hold and talk to the new caller.

NOTEzFor best performance and further reduction
of ambient noise, close the vehicle windows,lower the blower speed and refrain from
conversation with your passengers while en- gaging the voice recognition function.
z Some voice commands have alternative
commands.
z Depending on the selected language, some
functions may not be available.
Selecting the Language
1. Press the SPEECH button.
2. Say “Setup”.
3. Say “Language.”
4. The voice guide will say “Select a lan-
guage: English, French, Spanish, Italian,
German, Dutch, Portuguese or Russian”
Say the desired language. (Example: Say “English.”)
5. The voice guide will say “English
(French, Spanish, Italian, German, Dutch, Portuguese or Russian) selected.
Is this correct?” Say “Yes.”
Answer “No” to return to Step 4.
NOTEz The voice guide will repeat the same mes-
sage twice. The first message is in the cur-rent language, and the second message is inthe selected language.NOTEz If many entries are registered in the vehicle
phone book, changing the language will take
longer.
z Changing the language deletes the mobile
phone book imported to the Bluetooth

When the security function is turned on, it is
necessary to make a voice input of a 4-digit password in order to use all functions of the
Bluetooth

Speaker enrollment function
The Bluetooth

3.If you have completed a speaker enroll-
ment process once already, the voiceguide will say either “Enrollment is ena-
bled. Would you like to disable or re-
train?” or “Enrollment is disabled. Would you like to enable or retrain?”
4. When enrollment is “enabled”, the voice
model is on; when enrollment is “disa-
bled”, the voice model is off. Say the command that fits your needs.
Say “Retrain” to start the speaker enroll-
ment process and recreate a new voice model. (Refer to “Speaker enrollment”
on page 8-56.)Connecting the Bluetooth

Answer “No” to return to pairing codeselection.NOTEz Some Bluetooth

NOTEzIf 7 devices have already been paired, the
voice guide will say “Maximum devicespaired” and then the system will end the
pairing process. To register a new device, delete one device and then repeat the pairing
process.
(Refer to “Selecting a device: Deleting a de- vice” on page 8-60.)
4. The voice guide will say “Start pairing
procedure on the device. See the device manual for instructions.” and then willsay “The pairing code is <pairing
code>.”
NOTEz Some Bluetooth

7.The voice guide will say “Pairing code
set to <pairing code>.”
When the confirmation function is on, the system will confirm whether the
number said is acceptable. Answer
“Yes.”
Answer “No” to return to Step 6.
8. The voice guide will say “Do you want
to pair a device now?” Answer “Yes,”the system will proceed to Step 3 in thepairing process. Refer to the “Pairing
procedure- Type 2.”Selecting a device
If multiple paired Bluetooth

Deleting a device
Use the following procedure to delete a
paired Bluetooth

tooth