display NISSAN 350Z 2004 Z33 Navigation Manual

2. Select theEdit Route key .
3. Choose the destination (waypoints) youwant to adjust on the [EDIT ROUTE] screen.
4. The map screen will be displayed for ad-
justing. Use the joystick to adjust the loca-
tion.
INFO:
When you move the joystick, the
Adjust key
will be displayed.5. Select the
Adjust key .
The new destination (waypoints) will be set.
INV1560
INV1561
INV1562
INV1563
HOW DO I PROGRAM A DESTINATION?
5-33

ALL CLEAR
The destination and waypoint can be deleted at
one time.
1. Press the ROUTE button.
Several keys will be displayed on the right
of the screen.
Select the
Edit Route key .2. The [EDIT ROUTE] screen will be displayed.
Select the
All Clear key .3. Select the
Y es key .
INV1560INV1568INV1569
HOW DO I PROGRAM A DESTINATION?
5-35

QUICK STOP
The system will display pre-defined POIs
(Points of Interest) in the current vicinity of the
vehicle and the distances to them. These POIs
can be gas stations, hotels, restaurants, A TM’s
or customer-programmed facilities. This func-
tion will operate while the vehicle is moving.
1. Press the ROUTE button.
The display shows several keys on the right of
the screen.
Select the
Quick Stop key .2. The display shows the [QUICK STOP]
screen.
Select the category of your choice.INFO:
Five categories are displayed on the screen.
The last one can be customized. When you use
a POI category frequently , it is convenient to
use the quick stop function. Please refer to
“Quick stop customer setting” on page 5-37.
3. The cuisine selection screen is displayed
only when the
REST AURANT key is se-
lected. Select the
All key orFast Food
key .
INV1570INV1571
INV1572
HOW DO I PROGRAM A DESTINATION?
5-36

4. The display shows the direction and dis-
tance from the current vehicle position to
the selected facility .
Select the facility name you want to set as
a destination (waypoints).5. Set route priorities, then select the
OK key . Route calculation to the desti-
nation will be started.
INFO:
If quick stop is set after the destination was set,
the system starts the route calculation to the
location as the waypoint. Five waypoints can be
registered at the same time.
QUICK STOP CUSTOMER SET-
TING
1. Press the SETTING button.
2. Select the
Navigation key on the [SET -
TINGS] screen.
INV1573INV1574INV1466
HOW DO I PROGRAM A DESTINATION?
5-37

3. Select the
Quick Stop Customer Settings key on
the [NAVIGA TION SETTINGS] screen.4. Select a facility you frequently visit. For ex-
ample, select theNISSAN DEALER key .
When it is set, the screen returns to the pre-
vious screen.
Press the MAP button to return to the
map.5. Press the ROUTE button. Then, select theQuick Stop key , and press the PUSH
ENTER button. The display shows the se-
lected facility in the last row.
INV1576INV1577INV1578
HOW DO I PROGRAM A DESTINATION?
5-38

INFO:
When a hospital is set as a destination, a tele-
phone number of the destination will be dis-
played, if available.WHERE AM I?
This key is used to find the name of the street
on which the vehicle is currently located.
1. Press the ROUTE button.
Several keys appear on the right of the screen.
Select the
Where am I? key .2. The display shows the [WHERE AM I?]
screen, which includes the next, current,
and previous streets. Each one shows the
streets which the vehicle is approaching,
currently traveling on, and those streets the
vehicle was previously traveling on.
Press the MAP or PREVIOUS button to
return to the map.
INV1579INV1580INV1581
HOW DO I PROGRAM A DESTINATION?
5-39

6 HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
Setting with thePoint of Interest (POI)key ............................................................... 6-2
Setting with the
Listkey .................... 6-2
Setting with the
Categorykey ............ 6-4
Setting with the
Statekey .................. 6-7
Setting with the
Citykey .................. 6-9
Setting with the
Nearbykey............. 6-11
POI ca tegories ........................................... 6-12
Setting the nearby display icons ............... 6-13

SETTING WITH THE
Point of Interest (POI)KEY
The keys in Point of Interest (POI) are List, Cat-
egory , State/Province, City and Nearby , and
they are explained below.
1. First press the DEST button.
2. Select the
Point of Interest (POI) key on
the [DEST . SETTING (POI)] screen.
SETTING WITH THEListKEY
TheList key is used when you know the ex-
act names of the destinations and waypoints.
1. Input the facility name for your destination,
then select the
List key .NOTE:
For a speedier search, input the
state/province, city and category before
searching for your desired destination.
INFO:
If the system detects that the number of cor-
responding facilities or cities is five or less, the
display shows the list screen automatically .
2. The display shows the screen to select a fa-
cility or
Info key .
INV1521
INV1583
INV1584
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-2

When theNext Search key is selected, it is
possible to narrow down categories,
states/provinces and cities.
T o use this function, refer to “Setting with the
Category key”, “Setting with theState key”
and “Setting with the
City key” on pages 6-4,
6-7 and 6-9.3. When a facility name is selected, the display
shows the [DEST . SETTINGS (POI)] screen
to set the destination.
T o set priorities, select the
OK key . Then,
the route calculation will be started.
When you alter the destination or set
waypoints, select the
Waypoint key .
Please refer to “Making the system guide
the route with detailed options” on page
5-27.
When the
Info key next to the facility
name of your choice is selected in step 2,
the display shows the detailed [Address]
and [T elephone number] of the selected fa-
cility , and the
Map andEnter keys.
INV1585INV1586INV1587
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-3

When setting the facility as the destination,
select the
Enter key . The display shows
the [DEST . SETTING (POI)] screen to set
the destination.
Set priorities and select the
OK key .
Then, the route calculation will be started.
When you alter the destination or set
waypoints, select the
Waypoint key .
Please refer to “Making the system guide
the route with detailed options” on page
5-27.
When the
Map key is selected, the dis-
play shows the map. When the PUSH EN-
TER button is pressed, the display shows
the
Destination key .
SETTING WITH THECategory
KEY
TheCategory key is used when you select a
facility category to set the destination.
1. Select the
Category key .
INV1586INV1589INV1590
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-4