display NISSAN 350Z 2004 Z33 Navigation Manual

4. T o slightly alter the destination.
Select the
Map key to display the map
screen of the area around the specified des-
tination (waypoints).5. If necessary , operate the joystick to adjust
the location of the destination (waypoints).
Press the PUSH ENTER button. Select the
Destination key to confirm.
The [DEST . SETTINGS (City)] screen will
be displayed.
T o set the destination (waypoints), refer to
“Making the system guide the route with
detailed options” on page 5-27.
Setting with theStatekey
TheState key is used when you select a
state/province to set the destination.
1. Select the
State key .
INV1526INV1527INV1528
HOW DO I PROGRAM A DESTINATION?
5-20

2. The display shows the screen to select
states/provinces.
Input a state/province name.INFO:
When the
Last 5 States key is selected in
step 2, the previous five settings will be listed.3. The display shows the state/province list.
Select a state/province name.
INV1529INV1530INV1531
HOW DO I PROGRAM A DESTINATION?
5-21

4. The screen returns to the [DEST . SETTINGS
(City)] screen.
When the state/province is set, the display
shows the selected state/province next to
the
State key .
Input the city name.
Please refer to “Setting with the
List key”
on page 5-19.
SETTING WITH THE
Phone NumberKEY
Sets the destination (waypoints) on the map
screen of the area and around the input phone
number .
1. Press the DEST button.
2. Select the
Phone Number key on the
[DEST . SETTINGS] screen.3. Enter the ten-digit phone number of the
destination (waypoints) using the keyboard
on the [DEST . SETTINGS (Phone Number)]
screen.
4. If you select the
OK key , the [DEST . SET -
TINGS (Phone Number)] screen will be dis-
played.
INV1532
INV1533
INV1534
HOW DO I PROGRAM A DESTINATION?
5-22

5. T o set the destination (waypoints), refer to
“Making the system guide the route with
detailed options” on page 5-27.6. T o slightly alter the destination.
Select the
Map key to display the map
screen of the area around the specified des-
tination (waypoints).7. If necessary , operate the joystick to adjust
the location of the destination (waypoints).
Press the PUSH ENTER button.
Select the
Destination key to confirm.
T o set the destination (waypoints), refer to
“Making the system guide the route with de-
tailed options” on page 5-27.
INV1535INV1536INV1537
HOW DO I PROGRAM A DESTINATION?
5-23

INFO:
When a hospital is set as a destination, a tele-
phone number of the destination will be dis-
played, if available.
SETTING WITH THEMapKEY
This will enable you to zoom into the map for
detail and set the desired location. This works
best when you know the location geographi-
cally , or want to check the geographical sur-
roundings on the map before setting the des-
tinations.1. Press the DEST button.
2. Select the
Map key .
The map of the entire area will be displayed.3. Operate the joystick to choose the destina-
tion (waypoints).
INV1538INV1539INV1540
HOW DO I PROGRAM A DESTINATION?
5-24

The [DEST . SETTINGS] screen will be dis-
played.
Select the
Country key .
2. Select the
Country key .
Each time the PUSH ENTER button is
pressed, the country selection toggles be-
tween USA and Canada.
3. Then, the selected country will be displayed
at the right of the
Country key .
SETTING WITH THEHomeKEY
(IN EASY MODE)
Sets the home as a destination.
INFO:
In the Expert Mode, this key will not be dis-
played. T urn on the highlighted green
Short Menus key in the [SETTINGS] screen.
1. Press the DEST button.
2. Select the
Home key .3. The [DEST . SETTINGS] screen will be dis-
played.
Select the
OK key .
T o set the destination (waypoints), refer to
“Making the system guide the route with de-
tailed options” on page 5-27.
INFO:
If the home is not registered in the Address
Book, the [EDIT ADDRESS BOOK
(Address/Street)] screen will be displayed.INV1544
INV1454
INV1546
HOW DO I PROGRAM A DESTINATION?
5-26

INFO:

If you select the
OK key at this point,
route calculation will start without any
waypoints.

Press the PREVIOUS button to display
the [EDIT ROUTE] screen.
Setting the waypoints
After you set a destination, you can set
waypoints.
INFO:

When the ROUTE button is pressed on
the map and the
Edit Route key is se-
lected, the [EDIT ROUTE] screen will be dis-
played.

The maximum number of destinations and
waypoints that can be set is six (6).Please refer to “Expert mode categories” on
page 5-2.
1. Select the
key or
key on the [EDIT ROUTE]
screen.
The [EDIT ROUTE] screen will be displayed.
2. Select a waypoint destination using one of
the destination selection procedures out-
lined earlier in the chapter .
INV1548
INV1549
INV1550
HOW DO I PROGRAM A DESTINATION?
5-28

Select the conditions with high priorities.
If you want to get to your destination in the
shortest time, select the
Shortest Time key .
Selecting the key will turn the indicator light in
the key ON, and selecting the key again will
turn the indicator light OFF .
INFO:

When you select the
OK key at this point,
route calculation will start without any ad-
ditional waypoints.
Press the PREVIOUS button to display
the [EDIT ROUTE] screen.

It is also possible to set a waypoint by se-
lecting the
Waypoint key in the [DEST .
SETTING] screen.
Setting the priorities for route
calculation
After the setting of destinations and waypoints
is completed, set the calculation conditions
such as route type with high priorities.
1. Select the
Priorities key .The screen for setting calculation conditions
will appear . The conditions with the indicator
light ON will have high priority .
INFO:
When the ROUTE button is pressed on the
map and the
Edit Route key is selected, the
[EDIT ROUTE] screen will be displayed.
2. Select the conditions with high priorities.
Select each key on the screen to turn its re-
spective indicator light ON or OFF .
INV1551
INV1552
INV1553
HOW DO I PROGRAM A DESTINATION?
5-29

Route calculation and guidance
After setting all the items required, you may
proceed to route calculation for guidance. After
the route calculation is completed, the guid-
ance will start automatically .
INFO:
When the ROUTE button is pressed on the
map and the
Edit Route key is selected, the
[EDIT ROUTE] screen will be displayed.
Select the
Route calc. key .Route calculation screen will be displayed.
The suggested route will be displayed with a
thick blue line. If you enter this route, the voice
guide will start.
INFO:

If you want to cancel the route calculation,
press the CANCEL button.

If you set a place which is not suitable as
a destination, the suggested route will not
be displayed. In such a case, theOK key
will be displayed on the screen. Select the
OK key . Reset a correct destination.

If route calculation is not possible with all
the set preferences, the system may look up
a route that does not exactly correspond to
the preferences.

When deleting the settings of destinations
or waypoints, press the ROUTE button.
Enlarged intersection display
When the vehicle approaches a guide point
such as an intersection, the enlarged map of
the point will be displayed.
INV1555
INV1556
INV1557
HOW DO I PROGRAM A DESTINATION?
5-31

INFO:

When no operation is executed with the en-
larged map displayed, the map stays dis-
played.

If route numbers are included in the map
data, route numbers will be displayed on
the left side of the screen.

If street names are displayed in two lines,
route numbers will not be displayed.
NOTE:

When the guide point is close to theguidance start point, the enlarged
map may not be displayed.

The guide point name may not be dis-
played.

The position of the vehicle icon on the
enlarged map may differ from the po-
sition on the current display .
1. Press the MAP or PREVIOUS button.
The map screen will appear .INFO:
T o display the enlarged map, press the MAP
button or PREVIOUS button.
2. When the vehicle arrives at the neighbor-
hood of the destination, the route guidance
will end automatically .
INFO:

T o alternate between the map and the en-
larged screen, press the MAP button or
PREVIOUS button.

In the map screen, the distance to the next
guide point and the turning direction will be
displayed on the right side of the screen.
ADJUSTING AND DELETING
THE PRESET DESTINA TION
(W A YPOINTS)
Using the joystick, you canadjust the des-
tination(waypoints).
1. Press the ROUTE button.
INV1558
INV1559
HOW DO I PROGRAM A DESTINATION?
5-32