NISSAN 370Z COUPE 2017 Z34 08IT Navigation Manual

WARNING
NavWeatherXM information is not a
substitute for attentive driving. Weather
conditions change constantly and
emergency situations can arise without
warning. Relying only on Nav-
WeatherXM information could result in
serious personal injury.
NavWeatherXM information is available in lim-
ited markets. To subscribe to or check if this
service is available in the area, call 1-866-635-
2349 or access www.siriusxm.com/navweather.
INFO:
. If a contract is not completed for the
NavWeatherXM information service, a mes-
sage appears and it will not be possible to
check the information on the traffic informa-
tion system.
. The weather information is available only for
areas that provide weather information to
NavWeatherXM.
INFO:
The reception condition of the NavWeatherXM
information transmitted from the provider can be
confirmed using the “Weather” indicator on the
upper right side of the screen.
Green: The reception condition is good.
Gray: The reception condition is not good.
No mark: A subscription to the NavWeatherXM
service is not detected.
DISPLAYING WEATHER INFORMA-
TION SCREEN
Basic Operation
1. Push <INFO>.
2. Highlight [Weather Info] and push <ENTER>.
3. Highlight the preferred information and push <ENTER>.
4. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Available items: . Current Weather and Forecasts:
Displays current weather information and
three-day forecasts.
. Warnings and Watches History:
Displays a list of warnings and watches
recently detected around the current loca-
Viewing technical information7-9

tion.
. Weather Map:
Displays the current weather map for the
preferred area.
. Temperature Map:
Displays the current temperature map for the
preferred area.
. Warnings Map:
Displays the current watches/warnings map
for the preferred area.
. Road Condition Map:
Displays the current road condition map for
the preferred area.
Selecting city
When displaying various weather information
screens by pushing <INFO>, the range can be
specified for the weather information from
among the current location (local) , destination,
countrywide (nation) or a specified city.
The city can be specified by selecting one from
the list that is displayed.
1. Push <INFO>.
2. Highlight [Weather Info] and push <ENTER>.
3. Highlight the preferred information and push
<ENTER>.
4. Highlight [Select Other City from Menu] andpush <ENTER>.
5. Highlight the preferred state from the list
and push <ENTER>.
7-10Viewing technical information

6. Highlight the preferred city from the list andpush <ENTER>.
INFO:
[Select Other City from Menu] is not available
while driving.
Current weather and forecasts
The current weather information and a three-day
forecast for the current location, the destination
or the preferred city.
1. Highlight [Current Weather and Forecasts] and push <ENTER>.
2. Highlight the preferred area and push
<ENTER>.
INFO:
.[Weather Info on Destination] is notavailable unless a destination is set for
the route guidance.
.When a destination is not set, nearby
weather information is displayed.
3. A weather information screen is displayed. Highlight [Forecast] and push <ENTER>.
4. The forecast screen is displayed. A three-
day forecast can be confirmed for the
preferred area.
5. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Voice command
1. Push <TALK
>located on the steering
wheel switch.
2. After the tone sounds, speak a command.
To display the list for weather information:
“Weather Information” (Alternate command
mode)
Viewing technical information7-11

Warnings and watches history
A list can be displayed for the warning/watch
events detected around the current location. The
detailed information of each event can also be
displayed.
1. Highlight [Warnings and Watches History]and push <ENTER>. A list warning/watch
events around the current location is dis-
played.
2. Highlight the event to check the detailed
information and push <ENTER>.
3. A screen with detailed information of the
event is displayed.
4. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Weather Map
The current weather map can be confirmed for
the current location, the destination, the entire
country or the preferred city.
1. Highlight [Weather Map] and push
<ENTER>.
2. Highlight the preferred map area push<ENTER>.
INFO:
[Destination Map] is not available unless a
destination is set for the route guidance.
3. A weather map is displayed. The weather and precipitation level are shown by colors.
4. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
7-12Viewing technical information

INFO:
Touch [Legend] to display the map legend.
Voice command
1. Push <TALK
>located on the steering
wheel switch.
2. After the tone sounds, speak a command.
To display the list for weather map:
“Weather Map” (Alternate command mode)
Temperature Map
The current temperature map can be confirmed
for the current location, the destination, the
entire country or the preferred city.
1. Highlight [Temperature Map] and push <ENTER>.
2. Highlight the preferred map area and push<ENTER>.
INFO:
.[Destination Map] is not available unlessa destination is set for the route gui-
dance.
.When a destination is not set, a nearbyweather map is displayed.
3. A temperature map is displayed. The tem- perature information is shown by numbers
and colors.
4. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
INFO:
Touch [Legend] to display the map legend.
Viewing technical information7-13

Warnings Map
The current warning/watch information can be
confirmed for the current location, the destina-
tion, the entire country or the preferred city.
1. Highlight [Warnings Map] and push<ENTER>.
2. Highlight the preferred map area and push<ENTER>.
INFO:
[Destination Map] is not available unless a
destination is set for the route guidance.
3. A warning/watch map is displayed. Warning and watch information is shown by colors.
4. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
INFO:
Touch [Legend] to display the map legend.
Road Condition Map
The current road condition can be confirmed for
the current location, the destination, the entire
country or the preferred city.
1. Highlight [Road Condition Map] and push <ENTER>.
2. Highlight the preferred map area and push<ENTER>.
7-14Viewing technical information

INFO:
[Destination Map] is not available unless a
destination is set for the route guidance.
3. A road condition map is displayed. The road conditions are shown by colors.
4. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
INFO:
Touch [Legend] to display the map legend.
DESTINATION WEATHER ON SUG-
GESTED ROUTE SCREEN
On the screen of the suggested route after
setting a destination, the current weather
information around the destination is displayed
via icons.
Weather information icons
Clear
Mostly Clear
Partly Cloudy
Mostly Cloudy
Cloudy
Haze
Fog
Rain, Light Rain
Hail
Heavy Rain
Freezing Rain/Ice
Snow
Heavy Snow
Dust/Sand
Smoke/Ash
Thunderstorm
Tornado/Funnel
Cloud
AUTOMATICALLY DISPLAY WARN-
INGS/WATCHES
When an urgent warning/watch is detected
around the current vehicle location, a message
pops up automatically with a voice announce-
ment.
Viewing technical information7-15

The message includes the weather icon and text
describing the event.
INFO:
. The pop-up messages and announcements
can be set to on or off.
“Weather information settings”
(page 7-16)
. If multiple warning/watch events are de-
tected, they will be displayed in order
starting with the one having the shortest
linear distance from the vehicle.
Weather information settings
The settings can be confirmed and changed for
the urgent weather information related functions.
1. Push <SETTING>.
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Weather Info Setting] and push <ENTER>.
4. Highlight the preferred setting and push <ENTER>. The indicator for the setting
illuminates.
Available setting items: . Display an Alert for Weather Warnings:
Displays a message screen automatically
when the system detects urgent warning
information.
. Display an Alert for Weather Watches:
Displays a message screen automatically
when the system detects urgent watch
information.
. Voice Announcements:
Provides urgent information announcements
for warnings and watches around the current location.
Types of warnings/watches
Category Warnings/Watches
Tornado Tornado Watch, Tornado
Hurricane Inland Hurricane Wind, Hurri- cane Force Wind, Hurricane,
Typhoon
Storm Severe Thunderstorm Watch, Severe Thunderstorm, Storm,
Tropical Storm, Inland Tropical
Storm, Dust Storm
Flood Flood Watch, Flash Flood,
Coastal Flood, Lakeshore
Flood, High Surf, Flood
Winter Winter Watch, Heavy Snow, Heavy Sleet, Lake Effect Snow,
Freeze, Heavy Freezing Spray,
Blizzard, Ice Storm, Winter
Storm
Wind Wind Watch, High Wind, Wind
Chill, Gale
Extremes Excessive Heat
Other Red Flag, Tsunami, Avalanche,
Special Marine, Earthquake,
Law Enforcement, Hazardous
Materials, Nuclear Power Plant,
Radiological Hazard, Civil Dan-
ger, Fire, Shelter in Place,
Volcano, Other Watches,
Other Warnings
7-16Viewing technical information

INFO:
. The “Other Watches” category in the
“Other” category includes Inland Hurricane
Watch, Hurricane Watch, Typhoon Watch,
Tropical Storm Watch, Inland Tropical Storm
Watch and Fire Weather Watch.
. The “Other Warnings” category in the
“Other” category includes Dense Fog Warn-
ing, Freezing Fog Warning, Extreme Cold
Warning, Frost Warning, Hydrologic Warn-
ing, Ashfall Warning, Air Stagnation Warn-
ing, Low Water Warning, Ice Accretion
Warning, Dense Smoke Warning, Dense
Smoke Advisory, Freezing Fog Advisory,
Dense Fog Advisory, Ashfall Advisory and
Air Stagnation Advisory. Map data can be updated.
1. Push
<INFO>.
2. Highlight [Map Update] and push
<ENTER>.
3. To update the map data, insert the map update DVD-ROMs.
4. Highlight [DVD Update] and push
<ENTER>.
For the procedure of the map update, refer
to the manual of the updated DVD-ROMs.
INFO:
. Refer to the vehicle Owner’s Manual for the
location of the DVD slot.
. Do not eject the DVD-ROM while updating
the map data. Doing so will result in an
incomplete update.
. To order updated DVD-ROMs, contact your
NISSAN dealer.
. Multiple DVD-ROMs are required to fully
update the system. In addition, a Digital
Rights Management (DRM) activation code
is required to complete the installation. To
purchase a map data for updating the
navigation system and DRM code, please
visit www.nissannavigation.com. You will
need your Unit ID in order to purchase a
map update.
NOTE:
In handling the DVD-ROM, be careful on
the following points. . Do not try to bend the DVD-ROM. Do
not use any disk that is bent or cracked.
. Do not use any benzine, thinner, or
antistatic spray on them.
MAP UPDATE
Viewing technical information7-17

.Do not put on any sticker or write
anything on either surface.
. If you need to clean it, do so with a soft
cloth by wiping from the centre out-
ward.
. Do not use a DVD Laser Lens Cleaners
as they may cause the DVD player to
malfunction. This displays the map version information.
BASIC OPERATION
1. Push
<INFO>.
2. Highlight [Navigation Version] and push <ENTER>.
3. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen. This displays GPS information, such as the
positioning status, latitude/longitude, altitude
and satellite locations.BASIC OPERATION
1. Push
<INFO>.
2. Highlight [Others] and push <ENTER>.
3. Highlight [GPS Position] and push <ENTER>.
4. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Contents of GPS information
*1GPS Reception:
Displays the GPS positioning method.
VIEWING NAVIGATION SYSTEM
VERSION INFORMATION VIEWING GPS CURRENT LOCATION
INFORMATION
7-18Viewing technical information