NISSAN ALTIMA HYBRID 2008 L32A / 4.G Navigation Manual

3. Touch the preferred location key from the
list.
INFO:
To use the sort functions, stored locations must
be set in advance. You can sort the list by touch-
ing one of the following keys:
h1By No:
The address book entries are displayed
in ascending numerical order.
h2By Icon:
By selecting a particular icon, a list that
contains only the address book entries
associated with that icon is displayed.
h3By Name:
The address book entries are displayed
in alphabetical order.
h4By Group:
By selecting a particular group (family,
friends, leisure, etc.) , the selected group
is displayed at the top of the list.
4. The selected destination is displayed at the
center of the map. Touch the “Start” key af-
ter confirming the location of the displayed
destination.
The system sets the destination to the se-
lected location and starts calculating a
route.
LNV0455
LNV0193
Setting a destination4-17
ZREVIEW COPYÐ2008 Altima(alt)
Navigation System OMÐUSA_English(nna)
03/06/07Ðarosenma
X

INFO:
Even after setting a destination, you can adjust
the location of the destination.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-37)
Setting by voice command
1. Press the
button on the steering
wheel switch.
2. After the tone sounds, say a command.
cTo set the destination from a voicetag say:
“Destination <a stored voicetag>”
SETTING A PREVIOUS DESTINA-
TION
1. Press the DEST button.
2. Touch the “Others” key.
3. Touch the “Previous Destination” key.
A list screen is displayed.4. Touch the preferred previous destination
key from the list.
LNV0194WNV0558LNV0196
4-18Setting a destination
ZREVIEW COPYÐ2008 Altima(alt)
Navigation System OMÐUSA_English(nna)
03/13/07Ðarosenma
X

5. The selected destination is displayed at the
center of the map. Touch the “Start” key af-
ter confirming the location of the displayed
destination.
The system sets the destination to the se-
lected location and starts calculating a
route.INFO:
Even after setting a destination, you can adjust
the location of the destination.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-37)
Setting by voice command
1. Press the
button on the steering
wheel switch.
2. After the tone sounds, say a command.
cTo display a list of previous destinations say:
“Destination previous destinations”
SETTING THE PREVIOUS STARTING
POINT
1. Press the DEST button.
2. Touch the “Others” key.
3. Touch the “Previous Starting Point” key.
LNV0197LNV0198WNV0558
Setting a destination4-19
ZREVIEW COPYÐ2008 Altima(alt)
Navigation System OMÐUSA_English(nna)
03/13/07Ðarosenma
X

4. The starting point of the route of the previ-
ous route guidance is displayed at the cen-
ter of the map. Touch the “OK” key after
confirming the location of the displayed
starting point.5. Touch the “Start” key. The system sets the
destination to the selected location and
starts calculating a route.INFO:
Even after setting a destination, you can adjust
the location of the destination.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-37)
Setting by voice command
1. Press the
button on the steering
wheel switch.
2. After the tone sounds, say a command.
cTo select a previous starting point say:
“Destination previous starting point”
LNV0200LNV0201LNV0202
4-20Setting a destination
ZREVIEW COPYÐ2008 Altima(alt)
Navigation System OMÐUSA_English(nna)
03/13/07Ðarosenma
X

When you are setting the destination to a facility,
the following methods are available.
cSetting a Point of Interest
This allows you to find a facility by type, and
then have the system calculate a route to that
destination. Specify the region and city of the
destination to find it more quickly.
cSetting a Freeway Entrance/Exit
This allows you to set the destination to an en-
trance or exit of a freeway, and then have the
system calculate a route.
cSetting by Phone Number
If you know the telephone number of the
facility, use this to find the facility by entering
the number, and then have the system calcu-
late a route.
cSetting a Nearby Place
This allows you to set the destination to a fa-
cility located near the current vehicle location
or another location that you move to by scroll-
ing the map, and then have the system calcu-
late a route. If there is a particular Point of In-
terest type that you intend to use frequently,
you can store it in the list of nearby Points of
Interest.
“CUSTOMIZING NEARBY PLACES”
(page 6-26)
SETTING A POINT OF INTEREST
1. Press the DEST button.
2. Touch the “Points of Interest” key.3. Touch one of the main category keys.INFO:
Touch the “By Name” key to include all catego-
ries in the route calculation conditions.
LNV0203LNV0204
SETTING A FACILITY AS THE DESTI-
NATION
Setting a destination4-21
ZREVIEW COPYÐ2008 Altima(alt)
Navigation System OMÐUSA_English(nna)
03/13/07Ðarosenma
X

4. Touch one of the subcategory keys. 5. Touch one of the search keys for different
ways to find the destination facility.
cNearby POI:
The system will search for the facility, based
on the type selected, near the current vehicle
location.
cBy Name:
You input the name of the destination facility.
cBy City:
You input the name of the city where the des-
tination facility is located.LNV0205LNV0206
4-22Setting a destination
ZREVIEW COPYÐ2008 Altima(alt)
Navigation System OMÐUSA_English(nna)
03/06/07Ðarosenma
X

List screen by selecting the “Nearby POI” key for
Points of Interest.
h1Sort by distance:
The list of destination facilities will be
sorted by distance.
h2Sort by category:
The list of destination facilities will be
sorted by category.
LNV0456
Setting a destination4-23
ZREVIEW COPYÐ2008 Altima(alt)
Navigation System OMÐUSA_English(nna)
03/06/07Ðarosenma
X

Character input screen is displayed by selecting
the “By Name” key for Points of Interest.
h1Name:
The name of the destination facility can
be selected.
h2Category:
The preferred facility type can be
selected.
h3City:
“All Cities” is displayed, and all cities in
the region are available. Route calcula-
tion conditions can be narrowed down
by entering the name of the city.
h4Nearby POI:
The system will search for the facility,
based on the type selected, near the
current vehicle location.
h5Symbol 1:
Symbol keys are displayed by touching
this key.
LNV0457
4-24Setting a destination
ZREVIEW COPYÐ2008 Altima(alt)
Navigation System OMÐUSA_English(nna)
03/06/07Ðarosenma
X

Character input screen by selecting the “By
City” key for Points of Interest
h1Name:
The name of the destination facility can
be selected.
h2Category:
The preferred facility type can be
selected.
h3City:
“All Cities” is displayed, and all cities in
the region are available. Route calcula-
tion conditions can be narrowed down
by entering the name of the city.
h4Last 5 Cities:
The system will display 5 cities recently
set as destinations to narrow your
search for the facility.
h5Symbol 1:
Symbol keys are displayed by touching
this key.
6. Touch the “By Name” key. Enter the name of
the destination facility.
LNV0459
LNV0214
Setting a destination4-25
ZREVIEW COPYÐ2008 Altima(alt)
Navigation System OMÐUSA_English(nna)
03/06/07Ðarosenma
X

7. After finishing the entry, touch the “OK” key.
A list screen is displayed.8. Touch the preferred destination facility key
from the list.INFO:
By touching the “By Distance” key, you can sort
the list by the nearest distance.
The position of the selected location is displayed
in the preview on the right side of the screen.
By touching the “By Category” key, you can dis-
play the list that summarizes the entered names
into categories. Select the category to narrow
down the search.LNV0215LNV0216LNV0217
4-26Setting a destination
ZREVIEW COPYÐ2008 Altima(alt)
Navigation System OMÐUSA_English(nna)
03/06/07Ðarosenma
X