NISSAN ALTIMA HYBRID 2009 L32A / 4.G Navigation Manual

3. Touch the “Home Location” key.
INFO:
If you have not stored your home yet, the system
will automatically display a screen for storing it.
“STORING A LOCATION” (page 6-2)
4. Touch the “Start” key; a confirmation mes-
sage is displayed and the system sets your
home as the destination.5. Your home is displayed at the center of the
map, and the system starts calculating a
route.
Setting by voice command
1. Press the
button on the steering
wheel switch.
2. After the tone sounds, say a command.
●To set your home as the destination:
“Destination home”
SETTING FROM THE ADDRESS
BOOK AS A DESTINATION
1. Press the DEST button.
2. Touch the “Address Book” key.
A list screen is displayed.
LNV0190LNV0187LNV0189
4-16Setting a destination
REVIEW COPY—2009 Altima(alt)
Navigation System OM—USA_English(nna)
05/22/08—debbie


3. Touch the preferred location key from the
list.
INFO:
To use the sort functions, stored locations must
be set in advance. You can sort the list by touch-
ing one of the following keys:
1By No:
The address book entries are displayed in
ascending numerical order.
2By Icon:
By selecting a particular icon, a list that
contains only the address book entries as-
sociated with that icon is displayed.
3By Name:
The address book entries are displayed in
alphabetical order.
4By Group:
By selecting a particular group (family,
friends, leisure, etc.) , the selected group is
displayed at the top of the list.6. The selected destination is displayed at the
center of the map. Touch the “Start” key af-
ter confirming the location of the displayed
destination.
The system sets the destination to the se-
lected location and starts calculating a
route.
LNV0455
LNV0193
Setting a destination4-17
REVIEW COPY—2009 Altima(alt)
Navigation System OM—USA_English(nna)
06/12/08—tbrooks


INFO:
Even after setting a destination, you can adjust
the location of the destination.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-37)
Setting by voice command
1. Press the
button on the steering
wheel switch.
2. After the tone sounds, say a command.
●To set the destination from a voicetag say:
“Destination <a stored voicetag>”
SETTING A PREVIOUS DESTINA-
TION
1. Press the DEST button.
2. Touch the “Others” key.
3. Touch the “Previous Destination” key.
A list screen is displayed.4. Touch the preferred previous destination
key from the list.
LNV0194WNV0558LNV0196
4-18Setting a destination
REVIEW COPY—2009 Altima(alt)
Navigation System OM—USA_English(nna)
05/22/08—debbie


5. The selected destination is displayed at the
center of the map. Touch the “Start” key af-
ter confirming the location of the displayed
destination.
The system sets the destination to the se-
lected location and starts calculating a
route.INFO:
Even after setting a destination, you can adjust
the location of the destination.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-37)
Setting by voice command
1. Press the
button on the steering
wheel switch.
2. After the tone sounds, say a command.
●To display a list of previous destinations say:
“Destination previous destinations”
SETTING THE PREVIOUS STARTING
POINT
1. Press the DEST button.
2. Touch the “Others” key.
3. Touch the “Previous Starting Point” key.
LNV0197LNV0198WNV0558
Setting a destination4-19
REVIEW COPY—2009 Altima(alt)
Navigation System OM—USA_English(nna)
05/22/08—debbie


4. The starting point of the route of the previ-
ous route guidance is displayed at the cen-
ter of the map. Touch the “OK” key after
confirming the location of the displayed
starting point.5. Touch the “Start” key. The system sets the
destination to the selected location and
starts calculating a route.INFO:
Even after setting a destination, you can adjust
the location of the destination.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-37)
Setting by voice command
1. Press the
button on the steering
wheel switch.
2. After the tone sounds, say a command.
●To select a previous starting point say:
“Destination previous starting point”
LNV0200LNV0201LNV0202
4-20Setting a destination
REVIEW COPY—2009 Altima(alt)
Navigation System OM—USA_English(nna)
05/22/08—debbie


When you are setting the destination to a facility,
the following methods are available.
●Setting a Point of Interest
This allows you to find a facility by type, and
then have the system calculate a route to
that destination. Specify the region and city
of the destination to find it more quickly.
●Setting a Freeway Entrance/Exit
This allows you to set the destination to an
entrance or exit of a freeway, and then have
the system calculate a route.
●Setting by Phone Number
If you know the telephone number of the
facility, use this to find the facility by enter-
ing the number, and then have the system
calculate a route.
●Setting a Nearby Place
This allows you to set the destination to a
facility located near the current vehicle loca-
tion or another location that you move to by
scrolling the map, and then have the system
calculate a route. If there is a particular Point
of Interest type that you intend to use
frequently, you can store it in the list of
nearby Points of Interest.“CUSTOMIZING NEARBY PLACES”
(page 6-26)
SETTING A POINT OF INTEREST
1. Press the DEST button.
2. Touch the “Points of Interest” key.
LNV0203
SETTING A FACILITY AS THE DESTI-
NATION
Setting a destination4-21
REVIEW COPY—2009 Altima(alt)
Navigation System OM—USA_English(nna)
05/22/08—debbie


3. Touch one of the main category keys.
INFO:
Touch the “By Name” key to include all catego-
ries in the route calculation conditions.4. Touch one of the subcategory keys. 5. Touch one of the search keys for different
ways to find the destination facility.
●Nearby POI:
The system will search for the facility, based
on the type selected, near the current ve-
hicle location.
●By Name:
You input the name of the destination
facility.
●By City:
You input the name of the city where the
destination facility is located.
LNV0204LNV0205LNV0206
4-22Setting a destination
REVIEW COPY—2009 Altima(alt)
Navigation System OM—USA_English(nna)
05/22/08—debbie


List screen by selecting the “Nearby POI” key for
Points of Interest.
1Sort by distance:
The list of destination facilities will be sorted
by distance.
2Sort by category:
The list of destination facilities will be sorted
by category.
LNV0456
Setting a destination4-23
REVIEW COPY—2009 Altima(alt)
Navigation System OM—USA_English(nna)
05/22/08—debbie


Character input screen is displayed by selecting
the “By Name” key for Points of Interest.
1Name:
The name of the destination facility can be
selected.
2Category:
The preferred facility type can be selected.
3City:
“All Cities” is displayed, and all cities in the
region are available. Route calculation con-
ditions can be narrowed down by entering
the name of the city.
4Nearby POI:
The system will search for the facility, based
on the type selected, near the current ve-
hicle location.
5Symbol 1:
Symbol keys are displayed by touching this
key.
LNV0457
4-24Setting a destination
REVIEW COPY—2009 Altima(alt)
Navigation System OM—USA_English(nna)
05/22/08—debbie


Character input screen by selecting the “By
City” key for Points of Interest
1Name:
The name of the destination facility can be
selected.
2Category:
The preferred facility type can be selected.
3City:
“All Cities” is displayed, and all cities in the
region are available. Route calculation con-
ditions can be narrowed down by entering
the name of the city.
4Last 5 Cities:
The system will display 5 cities recently set
as destinations to narrow your search for
the facility.
5Symbol 1:
Symbol keys are displayed by touching this
key.6. Touch the “By Name” key. Enter the name of
the destination facility.
LNV0459
LNV0214
Setting a destination4-25
REVIEW COPY—2009 Altima(alt)
Navigation System OM—USA_English(nna)
05/22/08—debbie