warning NISSAN ALTIMA HYBRID 2010 L32A / 4.G Navigation Manual

This manual uses special words, symbols and
icons that are organized by function.
Please refer to the following items to understand
how to use this manual properly.
FOR SAFE OPERATION
WARNING
Indicates the presence of a hazard that
could cause death or serious personal
injury. To avoid or reduce the risk, the
procedures must be followed precisely.
CAUTION
Indicates the presence of a hazard that
could cause minor or moderate per-
sonal injury or damage to your vehicle.
To avoid or reduce the risk, the proce-
dures must be followed carefully.
NOTE:
Indicates items that help you understand
and maximize the performance of your
vehicle. If ignored, they may lead to a mal-
function or poor performance.
REFERENCE SYMBOLS
INFO:
Indicates information that is necessary for effi-
cient use of your vehicle or accessories.
Reference page:
Indicates the title and page that you should refer
to.
MAP:
This is an example of how a button on the control
panel will be shown.
“Route”:
This is an example of a key/item displayed on the
screen.
Voice Command:
This indicates an operation by voice command.This system is primarily designed to help you
reach your destination, and it also performs other
functions as outlined in this manual. However,
you, the driver, must use the system safely and
properly. Information concerning road
conditions, traffic signs and the availability of
services may not always be up-to-date. The sys-
tem is not a substitute for safe, proper and legal
driving.
Before using the navigation system, please read
the following safety information. Always use the
system as outlined in this manual.
WARNING
●To operate the navigation system,
first park the vehicle in a safe loca-
tion and set the parking brake. Oper-
ating the system while driving can
distract the driver and may result in a
serious accident.
●Do not rely on route guidance alone.
Always be sure that all driving ma-
neuvers are legal and safe in order to
avoid accidents.
●Do not disassemble or modify this
system. If you do, it may result in
accidents, fire or electrical shock.
HOW TO USE THIS MANUAL SAFETY INFORMATION
1-2Introduction

●If you notice any foreign objects in
the system hardware, spill liquid on
the system or notice smoke or a
smell coming from it, stop using the
system immediately and contact a
NISSAN dealer. Ignoring such condi-
tions may lead to accidents, fire or
electrical shock.
CAUTION
●Do not use this system if you notice
any malfunctions such as a frozen
screen or the lack of sound. Contin-
ued use of the system may result in
accidents, fire or electrical shock.
●Some states/provinces may have
laws limiting the use of video
screens while driving. Use this sys-
tem only where it is legal to do so.
●Extreme temperature conditions [be-
low4°F(20 °C) and above 158 °F
(70 °C)] could affect the performance
of the system.
NOTE:
Do not keep the navigation system running
with the engine stopped. Doing so may
discharge the vehicle battery. When you
use the navigation system, always keep
the engine running.This navigation system is certified as a Class 1
laser product.
The navigation system complies with DHHS
Rules 21 CFR Chapter 1, Subchapter J.
WARNING
●Do not disassemble or modify this
system. There are no user service-
able parts in this navigation system.
●If maintenance, adjustments and op-
erations other than those specified
in this manual are attempted, injury
due to laser radiation and exposure
could occur.
LASER PRODUCT
Introduction1-3

WARNING
●Always stop the vehicle in a safe lo-
cation before modifying the route
conditions.
●Modifying the route conditions while
driving may cause an accident.
During route guidance, the route conditions can
be modified and the route information can be
confirmed. Set route conditions according to
personal preference.
BASIC OPERATION
1. Press ROUTE.
2. Select the preferred setting item.
3. Press MAP to return to the current location
map screen.
Available setting items
●“Cancel Route/Resume Route”:
Cancel the current route guidance. A can-
celled route can also be reactivated. If the
suggested route is cancelled,Cancel Route
changes toResume Route.
“DELETING/REACTIVATING A
ROUTE” (page 5-17)●“Edit/Add to Route”:
Edit or add to the route that is already set.
“EDITING A ROUTE” (page 5-18)
●“Route Info”:
Confirm the route by the route information or
simulation. The confirmed route can also be
stored.
“CONFIRMING A ROUTE”
(page 5-25)
●“Guidance Settings”:
Activate or deactivate route, voice guidance
and/or traffic announcement and adjust the
volume level of voice guidance.
●“Recalculate”:
Manually search for the route again after
changing the search condition.
“RECALCULATE ROUTE”
(page 5-29)
●“Detour”:
To detour from the suggested route, calculate
a route detouring for a specified distance.
“SETTING A DETOUR ROUTE”
(page 5-31)
NRG0019
ROUTE SCREEN
5-16Route guidance

7 Viewing technical information
Information screen.................................7-2
Basic operation................................7-2
Viewing information about current vehicle location.....7-3
Basic operation................................7-3
Viewing available traffic information..................7-4
Basic operation................................7-5
Info on route...................................7-5
Nearby traffic info...............................7-6
Display urgent traffic information.................7-7
Traffic information on map.......................7-8
Traffic information settings......................7-10Viewing available weather information...............7-11
Displaying weather information screen...........7-12
Destination weather on suggested route
screen.......................................7-22
Automatically display warning/watches...........7-22
Map update......................................7-24
Viewing navigation system version information.......7-25
Basic operation...............................7-25
Viewing GPS current location information...........7-25
Basic operation...............................7-26

XM NavTrafficinformation is a subscription ser-
vice offered by XMSatellite Radio.
This service provides real-time information re-
garding traffic flow, accidents, road construction
and other incidents, where available.
XM NavTrafficcombines information from com-
mercial and public traffic data providers includ-
ing government departments of transportation,
police, emergency services, road sensors, cam-
eras and aircraft reports. The traffic information
is broadcast to the vehicle by the XMsatellites.
Available traffic information on the route the
driver selected is shown on the navigation
screen so traffic conditions between you and the
destination are known. Three types of real-time
traffic information for major roadways are shown
on the navigation system:
●Unscheduled traffic data for example, acci-
dents and disabled vehicles.
●Scheduled traffic data, for example road con-
struction and road closures.
●Traffic flow information (rate of speed data) .
WARNING
XM NavTrafficinformation is not a
substitute for attentive driving. Traffic
conditions change constantly and
emergency situations can arise without
warning. Relying only on XM NavTraf-
ficinformation may lead to a collision
and could result in serious personal
injury.
NOTE:
Flow information is provided only for
roads equipped with traffic sensors and is
not available in all markets covered by the
service. Flow data may not be available on
portions of a road that is under
construction.
XM NavTrafficinformation is available in limited
markets. To subscribe or to check if this service
is available in the area:
call 1-800-XM-RADIO (1-800-967-2346) or
see www.xmradio.com/navtraffic
INFO:
If a contract is not completed for XM NavTraffic
traffic information service, a message appears,
and it will not be possible to check the informa-
tion on the traffic information system.
VIEWING AVAILABLE TRAFFIC IN-
FORMATION
7-4Viewing technical information

●Traffic Announcements:
Announces the traffic information event on
the route.
INFO:
●Even when “Show Traffic Flow On Map” and
“Show Incidents on Map” are set to off, the list
display of “Info On Route” and “Nearby Traffic
Info” will not be affected.
●Even when “Traffic Announcements” is set to
off, the route guidance will not be affected.
Also, the announcement of emergency infor-
mation and weather information will not be
turned off.
Voice command
1. Press
located on the steering wheel
switch.
2. After the tone sounds, speak a command.
To turn on or off the traffic information sys-
tem: “Information” “Traffic Information”
(Standard mode)
“Traffic Information” (Alternate command
mode)XM NavWeather™ information is a subscription
service offered by XMSatellite Radio.
This service provides real-time information re-
garding current weather, temperature, warnings,
road conditions and forecasts where available.
The weather information is broadcast to the ve-
hicle by the XMsatellites.
The service enables you to view the following in-
formation on the navigation system.
*Current weather information icon of the destina-
tion on the screen of suggested route
*Detailed weather information and forecasts of
an area of interest
*Countrywide and local maps with the current
weather, temperature, warnings and road condi-
tion information
*List of warning/watches events detected
around the current location
*Pop-up messages on the navigation screen
with voice announcements when warnings and
watches are detected around the current loca-
tion
WARNING
XM NavWeather™ information is not a
substitute for attentive driving.
Weather conditions change constantly
and emergency situations can arise
without warning. Relying only on XM
NavWeather™ information could result
in serious personal injury.
XM NavWeather™ information is available in lim-
ited markets. To subscribe to or check if this ser-
vice is available in the area, call
1-800-XMRADIO (1-800-967-2346) or access
www.xmradio.com/navweather.
INFO:
●If a contract is not completed for the XM
NavWeather™ information service, a message
appears and it will not be possible to check
the information on the traffic information
system.
●The weather information is available only for
areas that provide weather information to XM
NavWeather™.
VIEWING AVAILABLE WEATHER IN-
FORMATION
Viewing technical information7-11

INFO:
The reception condition of the XMweather in-
formation transmitted from the provider can be
confirmed using the “Weather” indicator on the
upper right side of the screen.
Green: The reception condition is good.
Gray: The reception condition is not good.
No mark: A subscription to the XM Nav-
Weather™ service is not detected.DISPLAYING WEATHER INFORMA-
TION SCREEN
Basic operation
1. Press INFO.
2. Select “Weather Info”.
3. Press BACK to return to the previous
screen. Press MAP to return to the current
location map screen.
Available items:
●Current Weather and Forecasts:
Displays current weather information and
three-day forecasts.
●Warnings and Watches History:
Displays a list of warnings and watches re-
cently detected around the current location.●Weather Map:
Displays the current weather map for the pre-
ferred area.
●Temperature Map:
Displays the current temperature map for the
preferred area.
●Warnings Map:
Displays the current watches/warnings map
for the preferred area.
●Road Condition Map:
Displays the current road condition map for
the preferred area.
Selecting a city
When displaying various weather information
screens by selecting INFO, the range can be
specified for the weather information from
among the current location (local) , destination,
countrywide (nation) or a specified city.
The city can be specified by selecting one from
the list that is displayed.
LNV0591LNV0592
7-12Viewing technical information

4. The forecast screen is displayed. A three-
day forecast can be confirmed for the pre-
ferred area.
5. Press BACK to return to the previous
screen. Press MAP to return to the current
location map screen.
Voice command
1. Press
located on the steering wheel
switch.
2. After the tone sounds, speak a command.
To display the list for weather information:
“Weather Information” (Alternate command
mode)
Warnings and watches history
A list can be displayed for the warning/watch
events detected around the current location. The
detailed information of each event can also be
displayed.
1. Select “Warnings and Watches History”. A
list warning/watch events around the cur-
rent location is displayed.
NIN0021NIN0022
Viewing technical information7-15

INFO:
Touch “Legend” to display the map legend.
Warnings Map
The current warning/watch information can be
confirmed for the current location, the
destination, the entire country or the preferred
city.1. Select “Warnings Map”. 2. Select the preferred map area.
INFO:
“Destination Map” is not available unless a desti-
nation is set for the route guidance.
NIN0044NIN0045NIN0046
Viewing technical information7-19

3. A warning/watch map is displayed. Warning
and watch information is shown by colors.
4. Press BACK to return to the previous
screen. Press MAP to return to the current
location map screen.INFO:
Touch “Legend” to display the map legend.
Road condition map
The current road condition can be confirmed for
the current location, the destination, the entire
country or the preferred city.1. Select “Road Condition Map”.
NIN0047NIN0048NIN0018
7-20Viewing technical information