navigation system NISSAN GT-R 2016 R35 Multi Function Display Owner's Guide


> (GLW    0RGHO 51 @
2-46Navigation
Adding destination or waypoint:
Before starting route guidance, destinations
and/or waypoints can be added. A total of 6
destinations or waypoints can be set.
1.Highlight [Add Way Pt.] and push
<ENTER>.
2. Set additional destinations or waypoints and
push <ENTER>.
The method of searching for a location is the
same as the one for a destination.
ªSetting destinationº (page 2-23)
3. Highlight [Add Destination] or [Add Way- point] and push <ENTER>.
4. The system starts calculating a route that
includes the added destination or waypoint.
When the calculation is finished, the route is
displayed.
INFO:
.If a waypoint was added, [More Routes]cannot be selected.
.If a destination was added, the priordestination becomes a waypoint.
Moving location of destination
The location of the destination can be adjusted
by moving the cross pointer across the map.
1. Highlight [Move Location] and push
<ENTER>.
INFO:
The screen for adjusting the location also
changes by touching the map screen dis-
played on the right side of the screen.
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
direction) .º
ªFreeway entrance on your right onto (road
number and direction) .º
*3ªIn about one mile (1.6 kilometers) , exit on your
right.º
ªExit on your right.º
*4ªYou have arrived at your destination. Ending
route guidance.º
Guidance screens and preview
mode
Route guidance displays map screens and
various information according to the situation.
When route guidance starts, the Small Turn
Arrow on Map is displayed in the upper left
corner of the map screen. This arrow indicates
the turning direction at the next guide point
(corner or intersection) . The distance is also
displayed. At the top of the screen, the distance
to the next guide point and the name of the next
street to turn on to are displayed. Also, theremay be cases that next street names are
announced. The Small Turn Arrow on Map can
be enabled or disabled by the user.
ªDisplaying small turn arrow on mapº
(page 2-68)
Enlarged intersection view:
When approaching a guide point, the system
automatically changes to the split screen and
shows an enlarged view of the intersection on
the left screen. After passing through the
intersection, the system automatically returns
to the full screen mode. To switch to the full
screen mode while the enlarged intersection
view is displayed, push <MAP>. Pushing
<MAP> again displays the enlarged intersec-
tion view. Junction guidance:
While driving on a freeway, when the vehicle is
approximately 1 mile (approximately 2 km) from a
junction, the system automatically switches to
the split screen and displays an enlarged view of
the junction (3D) on the left screen. After
passing the junction, the system automatically
returns to the full screen mode. To switch to the
full screen mode while the enlarged junction
view is displayed, push
<MAP>.
Navigation2-49
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
2-50Navigation
Turn list:
Depending on the setting, the system can
constantly display the split screen and show
the turn list on the left screen. When approach-
ing a guide point, the left screen automatically
switches to an enlarged view of the intersection.
To switch to the full screen mode, push
<MAP>. Pushing<MAP>again displays the
turn list.
Guidance screen settings
The guidance screen can be displayed at all
times even when the vehicle is located away
from the guide point. Various types of screens
can be set.
Split screen settings:
The display setting on the left-hand side screen
shown during route guidance can be changed.
1. Push <ENTER> while the current location
map screen is displayed.
2. Highlight [Map View] and push <ENTER>.
3.Highlight [View Settings] and push
<ENTER>.
4. Highlight the preferred screen and push <ENTER>. The indicator of the selected
screen illuminates.
. Intersection
The map screen and the enlarged intersection
view can be displayed at the same time.
Push <MAP> to switch to the full map screen.
. Turn list
The list screen for showing the guide points to
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
3. Highlight the preferred facility for the way-point and push <ENTER>.
4. The waypoint is set, and the route search is
performed.
ªProcedures after setting destinationº
(page 2-44)
ROUTE SCREEN
WARNING
Always stop the vehicle in a safe
location before modifying the route
conditions.
Modifying the route conditions while
driving may cause an accident.
During route guidance, the route conditions can
be modified and the route information can be
confirmed. Set route conditions according to
personal preference.
Basic operation
1. Push <ROUTE VOICE>.
2. Highlight the preferred setting item and
push <ENTER>. 3.
Push <MAP> to return to the current
location map screen.
Available setting items
. [Cancel Route/Resume Route]:
Cancels the current route guidance. A
canceled route can also be reactivated. If
the suggested route is canceled, [Cancel
Route] changes to [Resume Route].
ªCanceling/reactivating routeº
(page 2-54)
. [Edit/Add to Route]:
Edit or add a destination or waypoints to the
route that is already set.
ªEditing routeº (page 2-55)
. [Route Info]:
Confirm the route by the route information or
simulation. The confirmed route can also be
stored.
ªConfirming routeº (page 2-60)
. [Guidance Settings]:
Activates or deactivates route, voice gui-
dance and/or traffic announcement and
adjust the volume level of voice guidance.
ªGuidance settingsº (page 2-61)
. [Recalculate]:
Manually search for the route again after
changing the search condition and have the
system calculate a route.
Navigation2-53
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
2-56Navigation
*6Condition for calculating a route to a waypoint:
Changes the conditions for calculating a route to
a waypoint.
ªChanging route calculation conditionsº
(page 2-59)
*7[Calculate]:
Manually search for the route again after chan-
ging the search conditions and have the system
calculate a route.
ªChanging route calculation conditionsº
(page 2-59)
Setting destination or waypoint:
A destination or waypoint can be added to the
route that has already been set. A total of 6
destinations or waypoints can be set.
1. Push<ROUTE VOICE>.
2. Highlight [Edit/Add to Route] and push
<ENTER>. 3. Highlight [Add Destination] or [Add Way-
point] and push <ENTER>.
If [Add Destination] is selected, the current
destination changes to a waypoint.
4. Set a destination or waypoint. The method of searching for a destination or waypoint is the
same as the one for a destination.
ªSetting destinationº (page 2-23)
5. The selected location is displayed at thecenter of the map. Highlight [Add to Route]
after confirming the location and push <ENTER>.
INFO:
Even after setting a destination/waypoint,
the destination/waypoint location can be
adjusted, the route can be stored, etc.
ªEditing/deleting destination or way-
pointº (page 2-57)
6. Return to the [Edit Route] screen. Set the route conditions as necessary.
7. Highlight [Calculate] and push <ENTER>.
The system will recalculate the routes. After
the route search is completed, the display
will automatically return to the current
location map screen.
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
INFO:
. The prior route is automatically deleted.
. Added waypoints and search conditions will
not be taken into consideration for the route
calculation until [Calculate] is highlighted
and <ENTER> is pushed.
Editing/deleting destination or waypoint:
The destination or waypoint that has already
been set can be modified or deleted.
If a location is modified or deleted when a
suggested route is already set, the prior
suggested route will be recalculated accord-
ingly.
1. Push <ROUTE VOICE>.
2. Highlight [Edit/Add to Route] and push
<ENTER>. 3. Highlight a destination or waypoint that is
already set and push <ENTER>.
4. Highlight [Move Dest.] to modify the location
and push <ENTER>.
ªMoving location of destinationº
(page 2-46)
5. Highlight [Delete] and push <ENTER>to
delete the location.
6. A confirmation message is displayed. Con- firm the contents of the message, highlight
[Yes] and push <ENTER>. The destination
or waypoint is deleted from the route. Return
to the [Edit Route] screen.
7. By highlighting [Calculate] and pushing
<ENTER>, the system will recalculate the
routes. After the route search is completed,
the display will automatically return to the
current location map screen.
Navigation2-57
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
2-58Navigation
INFO:
. If the destination is deleted, the final
waypoint of the route becomes the destina-
tion.
. Even if the map screen is touched, the same
map screen as when [Move Dest.] is
selected is displayed.
Changing order of destination and way-
points:
The order of a destination and waypoints that
have already been set can be changed.
1. Push <ROUTE VOICE>.
2. Highlight [Edit/Add to Route] and push
<ENTER>.
3. Highlight a destination or waypoint that is already set and push <ENTER>.
4.Highlight [Change Order] and push
<ENTER>. A list of the destination and
waypoints is displayed.
5. Highlight a preferred destination or waypoint
to replace the previously selected destina-
tion or waypoint and push <ENTER>.
6. A message is displayed and the order of the
destination or waypoint is changed.
7.By highlighting [Calculate] and pushing
<ENTER>, the system will recalculate the
routes. After the route search is complete,
the display will automatically return to the
current location map screen.
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
Changing route calculation conditions:
Each section of the route between waypoints
can have different route calculation conditions.
After setting these conditions, the entire route
can be recalculated.
1. Push<ROUTE VOICE>.
2. Highlight [Edit/Add to Route] and push
<ENTER>.
3. Highlight the preferred section of the route to the destination or waypoint and push
<ENTER>.
4. Highlight the preferred condition and push<ENTER>.
Available conditions
: [Fastest Route]
:[Minimize Freeway]
: [Shortest Route]
5. The conditions have been changed and the
display returns to the [Edit Route] screen.
6.By highlighting [Calculate] and pushing
<ENTER>, the system will recalculate the
routes. After the route search is completed,
the display will automatically return to the
current location map screen.
INFO:
. The recalculated route may not be the
shortest route because the system priori-
tizes roads that are easy to drive for safety
reasons.
. If the route conditions are set from [Route
Settings], all sections in the route are
subject to the same route conditions. This
applies even if different route conditions
have been set for different sections in [Edit
Route].
Navigation2-59
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
2-60Navigation
Confirming route
When the suggested route is displayed after
calculation, the route information can be con-
firmed or the suggested route can be simulated.
Basic operation:
1. Push<ROUTE VOICE>.
2. Highlight [Route Info] and push <ENTER>.
3.Highlight the preferred item and push
<ENTER>. Available setting items
.
[Turn List]:
Displays the details of the suggested route.
ªUsing turn listº (page 2-60)
. [Preview]:
The system will trace the planned route
going forward or in reverse.
ªUsing route previewº (page 2-60)
. [Simulation]:
Displays a simulation of the suggested
route. This function provides a detailed
image of the route with voice guidance.
ªConfirming route by simulationº
(page 2-61)
. [Store Route]:
Stores a calculated route. A maximum of 5
routes can be stored. Stored routes can be
easily retrieved and set as the suggested
route.
ªStoring routeº (page 2-73)
. [Map Scroll]:
Displays a map screen where the location of
the destination can be confirmed.
Even if the map screen is touched, the same
map screen as when [Map Scroll] is
selected is displayed. Using turn list:
1. Highlight [Turn List] and push
<ENTER>.
2. The information (e.g., intersections) can be confirmed on the route to the destination by
scrolling the screen using the center dial.
3. Push <MAP> to return to the current
location map screen.
Using route preview:
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
2-62Navigation
To turn the Voice Guidance ON or OFF:
ªVoice Guidance On/Offº (Alternate Com-
mand Mode)
Recalculate route
A route can be manually searched again after
changing the search condition. When the
vehicle deviates from the suggested route, the
route from the current location to the destination
is automatically searched again.
Manually re-searching route:
1. Push<ROUTE VOICE>.
2. Highlight [Recalculate] and push
<ENTER>.
3. A message is displayed, and the route is
recalculated.
4. Set the route conditions. After finishing thesetting, highlight [Start] and push
<ENTER>.
ªProcedures after setting destinationº
(page 2-44)
INFO:
When a waypoint has been set on the route, the
system will search for only one route even if
route recalculation is performed.
Setting Auto Reroute:
1. Push <ROUTE VOICE>.
2. Highlight [Route Settings] and push
<ENTER>.
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK