tow NISSAN GT-R 2016 R35 Multi Function Display Owners Manual


> (GLW    0RGHO 51 @
2-70Navigation
1. Push<SETTING>.
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Guidance Settings] and push
<ENTER>.
4. Highlight [Others] and push <ENTER>.
5. Highlight [Set Average Speeds] and push <ENTER>.
6. Highlight the preferred item and push
<ENTER>.
7. Use the center dial to make an adjustment. The speed can be increased/decreased by
5 MPH (5 km/h) .
8. After finishing the setting, push <ENTER>
or <BACK> to activate the setting.
9. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.Available setting items
. [Auto]:
If set to ON, the system automatically
calculates the required time to the destina-
tion, the indicator illuminates and the speed
settings cannot be changed.
. [Freeway]:
Adjust the average vehicle speed on a
freeway.
. [Main Road]:
Adjust the average vehicle speed on a main
road.
. [Town Road]:
Adjust the average vehicle speed on a town
road.
. [Residential]:
Adjust the average vehicle speed in a
residential area.
. [Reset]:
Sets the average vehicle speeds to the
default values.STORING LOCATION
Often visited locations can be stored in the
Address Book. The stored addresses can be
easily retrieved to set them as a destination or
waypoint.
INFO:
. The Address Book can store up to 300
locations.
. New information placed in the same storage
position will overwrite the old data.
Storing location by searching
After a location is searched for once, it can be
stored for future use.
1. Push <SETTING>.
2. Highlight [Navigation] and push <ENTER>.
STORING A LOCATION/ROUTE
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
INFO:
The screen may become distorted by strong
magnetic fields.
MAINTENANCE OF DISPLAY
CAUTION
. To clean the display, never use a
rough cloth, alcohol, benzine, thin-
ner and any kind of solvent or paper
towel with a chemical cleaning
agent. They will scratch or deterio-
rate the panel.
. Do not splash any liquid such as
water or car fragrance on the dis-
play. Contact with liquid will cause
the system to malfunction.
To clean the display screen, use a dry, soft cloth.
If additional cleaning is necessary, use a small
amount of neutral detergent with a soft cloth.
Never spray the screen with water or detergent.
Dampen the cloth first, then wipe the screen.
General system information11-17
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK