key NISSAN MAXIMA 2003 A33 / 5.G Navigation Manual

6 HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
Setting withPoint of Interest (POI)key ... 6-2
Setting with the
Listkey .................... 6-2
Setting with the
Categorykey ............ 6-4
Setting with the
Citykey .................. 6-6
Setting with the
Nearbykey............... 6-7
POI ca tegories ............................................. 6-8

SETTING WITH
Point of Interest (POI)KEY
The keys in Point of Interest (POI) are List, Cat-
egory , Nearby , and City , explained below.
1. First press the DEST button.
2. Select the
Point of Interest (POI) key on
the [DEST . SETTING (POI)] screen.
SETTING WITH THEListKEY
TheList key is used when you know the
names of the destinations and waypoints.
1. Input the facility name for your destination.INFO:
When names of facilities or cities are input, if
the system detects that the number of corre-
sponding facilities or cities is five or less, the
display shows the list screen automatically .
2. The display shows the screen to select a fa-
cility or
Info. key .
INV0294
INV0295
INV0296
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-2

3. When a facility name is selected, the display
shows the [DEST . SETTING] screen to set
the destination.
Set priorities, select the
OK key . Then,
the route calculation will be started.
When you alter the destination or set
waypoints, select the
Waypoint key .
Please refer to “Making the system guide
the route with detailed options” on page
5-17.INFO:
When the
Info. key next to the facility name
of your choice is selected in step 2, the display
shows the detailed [Address] and [Phone num-
ber] of the selected facility , and the
Enter and
Map key .
When setting the facility as the destination,
select the
Enter key . The display shows
the [DEST . SETTING] screen to set the des-
tination.
Set priorities and select the
OK key .
Then, the route calculation will be started.
When you alter the destination or set
waypoints, select the
Waypoint key .
Please refer to “Making the system guide
the route with detailed options” on page
5-17.
INV0297INV0298INV0299
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-3

When theMap key is selected in step 4,
the display shows the map. When the PUSH
ENTER switch is pressed, the display shows
the
Dest. key .
SETTING WITH THECategory
KEY
TheCategory key is used when you select a
facility category to set the destination.
1. Select the
Point of Interest (POI) key on
the [DEST . SETTING (POI)] screen.
Select the
Category key .2. The display shows the screen to select cat-
egories.
Input a category name.
INV0300INV0301INV0302
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-4

3. The display shows the category list.
Select a category name.
INFO:
When a
REST AURANT key is selected, the
screen to input the cuisine type will be dis-
played.4. The screen returns to the [DEST . SETTING
(POI)] screen.
When the category is set, the display shows
the selected category under theCategory
key .
Input the facility name.
INFO:

If you do not know the facility name you
want to go to, select the
List key so that
the facility names in the category will be
listed in alphabetical order .
It may take some time to show the list, de-
pending on categories.
5. When a facility name is input, the system
retrieves the facility name according to the
selected category and the input letters.
Then, the display shows the screen to select
a facility and
Info. key .
Please refer to “Setting with the
List key”
on the previous section.
INV0303INV0304
INV0305
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-5

SETTING WITH THECityKEY
TheCity key is used to retrieve a facility from
the specified city to set the destination.
1. Select the
Point of Interest (POI) key on
the [DEST . SETTING (POI)] screen.
Select the
City key .

The display shows the screen to retrieve cit-
ies.2. Input a city name.
3. The display shows the city list.Select a city of your choice.
4. The screen returns to the [DEST . SETTING
(POI)] screen.
When the city is set, the display shows the
selected city under the
City key .
Input the facility name of your choice.
INFO:

If you do not know the facility name, select
the
Category key to retrieve a facility .
When the facility is set from the
Category
key , the display shows the selected facility
INV0306INV0307
INV0308
INV0309
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-6

under theCategory key .

It may take some time to show the list, de-
pending on categories.
5. When the facility name is input, the system
retrieves the facility name according to the
selected city and the input letters. Then, the
display shows the screen to select a facility
and
Info. key .
Please refer to “Setting with the
List key”
in the previous section.
SETTING WITH THENearbyKEY
TheNearby key is used to retrieve a facility
within 25 miles (40 km) from the current ve-
hicle location.
1. Select the
Point of Interest (POI) key on
the [DEST . SETTING (POI)] screen.
2. Set category according to page 6-4.
3. Select the
Nearby key .
INFO:

Facilities of selected category will be listedin order by nearest distance.

The
Nearby key is available only when a
category is set. Set a category first.

When there are any nearby facilities based
on the selected category , the display shows
the list of facility names, directions and dis-
tance from the current vehicle location, and
Info keys.
Please refer to “Setting with the
List key”
in the previous section.
INV0310
INV0311
INV0312
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-7

Setting the nearby display icons
Five types of facilities can be displayed on the
map using respective icons, including:
— A TMs
— Gas stations
— Hotels
— Restaurants
— Rest areas
1. Change to the current vehicle location
screen.
2. Select the
Setting key .3. Select the
System Setting key on the
[SETTINGS] screen.4. Select theNearby Display Icons key on
the [SYSTEM SETTINGS] screen.
The [NEARBY DISPLA Y ICONS] screen will be
displayed.
INV0259INV0313
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-9

SETTING UP AND EDITING
THE ADDRESS BOOK
Y ou can store locations in the address book for
quicker access, or name the location and set
a special icon on the map.
SETTING UP THE ADDRESS
BOOK
Y ou can store your favorite places or the places
you frequently visit. By storing them, you can
call them quickly on the display , enabling
easier setting of these destinations.
Using various categories to store
locations
Y ou can choose various categories in the menu
to store the locations. The categories are:
Address/Street, Points of Interest (POI), Map,
Intersection, City and Previous dest.
1. Change to the current vehicle map.
Select the
Setting key on the screen.2. Select the
Edit Address Book key . The [EDIT ADDRESS BOOK] screen will be dis-
played.
3. Choose the storing number from the un-
used number list.
INV0363INV0364
HOW DO I USE THE ADDRESS BOOK FEATURE?
7-2

4. Store location.
Set a location to be stored in the same way as
when setting destinations (waypoints).
Please refer to “Seven categories” on page 5-2.
INFO:

Press the MAP button to go back to get
the current vehicle display .

The maximum number of the stored loca-
tions is 50, including your home and office.

If you want to store places close toPOI, it is quicker to use the
Points of Interest (POI) key .
Storing current vehicle position
1. Change to the current vehicle map.
2. Select the
Setting key .
3. Select the
Save Current Location key .
The storing number will be displayed at the ve-
hicle icon on the screen, and the current lo-
cation of the vehicle will be stored.INFO:

If the number of the stored locations ex-
ceeds 50, a message will appear “Memory
is full. Delete old one to store new one”.

If you store more than one location at the
same place, the location with the largest
stored number will be displayed.

If you store the location by the location
store function, the stored name may differ ,
depending on the scale used in the display .

The smallest and unused number will be
INV0365
INV0481
INV0362
HOW DO I USE THE ADDRESS BOOK FEATURE?
7-3