NISSAN MAXIMA 2008 A34 / 6.G 06IT Navigation Manual

Black plate (84,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
2. Highlight [New Dest.] and push<ENTER>.
INFO:
For the items except for [New Dest.], refer to
“Map menu screen”.
“SCROLLED LOCATION MAP
SCREEN” (page 2-12)
3. The system sets the destination to the
selected location and starts calculating a
route.
INFO:
If you set the destination on a freeway, a
confirmation message is displayed.The following operations are available after you
set a destination.
INFO:
The menu will not be displayed if you select,
[Stored Route] or [Nearby Places] from the
Destination menu.
OPERATIONS AFTER SETTING A
DESTINATION
4-24Setting a destination

Black plate (85,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
AVAILABLE SETTING ITEMS
.Start:
Sets the destination. If the route is already
set, the location becomes the new destina-
tion, and the route is recalculated.
.Route Details:
Allows you to change the route search
conditions or to check the route information.
“PROCEDURES AFTER SETTING A
DESTINATION” (page 5-2)
.Move Dest.:
Displays a map screen where you can adjust
the location of the destination.
.Add to Route:
Allows you to add a waypoint to the route
already set.
.Store Dest.:
Allows you to store the location in the
Address Book.
.POI Info.:
Allows you to view information about the
facility that you have set as the destination if
it is included in the map data.
ADJUSTING THE LOCATION OF THE
DESTINATION
You can adjust the location of the destination by
moving the cross pointer across the map.
1. Set the destination using an appropriate
method.
2. Highlight [Move Dest.] and push<ENTER>.
3. Adjust the location by moving the cross
pointer across the map and push
<ENTER>. The location of the destinationis modified.
INFO:
.Touching the map screen displayed on the
right side of the screen also changes to the
screen for adjusting the location.
.The map scale can be changed by pushing
<ZOOM IN>or<ZOOM OUT>. Touching
the scale icon can also be used to change
the map scale.
.Even if you touch the map screen or operate
the directional buttons other than the up or
down button, the same map screen as when
[Move Dest.] is selected is displayed.
Setting a destination4-25

Black plate (86,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
ADDING ADDITIONAL DESTINATIONS
TO A ROUTE
Even after the route is already set, you can add a
searched location as a new destination or
waypoint to that route.
If the route has not been set, [Add to Route]
cannot be selected.
1. Set the destination using an appropriate
method.
2. Highlight [Add to Route] and push
<ENTER>.
3. Highlight [Destination] or [Waypoint] and
push<ENTER>.
STORING A LOCATION
A searched location can be stored in the
Address Book. Then it can be easily retrieved
and set as a destination (or waypoint) .
1. Set the destination using an appropriate
method.
2. Highlight [Store Dest.] and push<ENTER>.
3. The location is stored in the Address Book.
The corresponding icon is displayed at the
set location on the map.
VIEWING INFORMATION ABOUT THE
SEARCHED LOCATION
Information (street address and phone number)
about Points of Interest stored in the map data
can be displayed.
1. Set the destination using an appropriate
method.
4-26Setting a destination

Black plate (87,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
2. Highlight [POI Info.] and push<ENTER>.
3. Information about the location is displayed.
4. Push<BACK>, or highlight [OK] and push
<ENTER>to return to the previous screen.
INFO:
.If [call] is displayed on the right side of the
screen, it is possible to call the location
indicated.
.The Bluetooth system is required to be
active and paired to the call location
indicated.
.Information about locations is not displayed
while driving.
Setting a destination4-27

Black plate (88,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
MEMO
4-28Setting a destination

Black plate (13,1)
5 Route guidance
Model "NAV2-N" EDITED: 2007/ 3/ 8
Procedures after setting a destination..................... 5-2
Available items after setting a destination............. 5-2
Starting route guidance................................... 5-2
Selecting a route........................................... 5-2
Confirming a route.......................................... 5-3
Adding a destination or waypoint....................... 5-4
Route screen.................................................... 5-5
Basic operation............................................. 5-5
Deleting/reactivating a route............................. 5-6
Editing a route............................................... 5-7Confirming a route........................................5-11
Searching for a detour route taking traffic
information into consideration..........................5-12
Setting conditions for the route calculation.........5-14
Recalculate route.........................................5-16
Setting a detour route...................................5-17
Route guidance settings................................5-18
About route guidance........................................5-23
Voice guidance during route guidance...............5-23
Guidance screens and preview mode...............5-24

Black plate (90,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
After performing the route search, you can
immediately start the route guidance. Also, it is
possible to confirm or change the route.
AVAILABLE ITEMS AFTER SETTING A
DESTINATION
.Start:
Starts route guidance to the selected
destination.
“STARTING ROUTE GUIDANCE”
(page 5-2)
.More Routes:
Displays 3 alternative routes.
“SELECTING A ROUTE” (page 5-2).Route Info:
Displays the route information.
“CONFIRMING A ROUTE”
(page 5-3)
.Add Way Pt.:
Allows you to edit the route by adding a
destination or waypoint.
“ADDING A DESTINATION OR
WAYPOINT” (page 5-4)
.Map Scroll:
Displays a map screen where you can
confirm the location of the destination.
INFO:
.If you have not performed any operations on
the system for several seconds, [Start] is
automatically selected, and the system
starts route guidance.
.When a waypoint has already been set, you
cannot select [More Routes].
.Even if you touch the map screen or operate
the directional buttons other than the up or
down button, the same map screen as when
[Map Scroll] is selected is displayed.
STARTING ROUTE GUIDANCE
1. Highlight [Start] and push<ENTER>.
Route guidance starts.
SELECTING A ROUTE
1. Highlight [More Routes] and push
<ENTER>.
2. Highlight the preferred route condition and
push<ENTER>.
PROCEDURES AFTER SETTING A
DESTINATION
5-2Route guidance

Black plate (91,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
3. Push<BACK>to return to the previous
screen.
Available route conditions
&1Short. Time (Blue):
Prioritizes by the shortest time.
&2Min. FWY (Red):
Minimizes the use of freeways.
&3Short. Dist. (Green):
Prioritizes by the shortest distance.
&4Map Scroll:
Displays a map screen where you can
confirm the location of the destination.
Even if you touch the map screen or operate
the directional buttons other than the up or
down button, the same map screen as when
[Map Scroll] is selected is displayed.
INFO:
.After you select a route, a preview is
displayed on the right side of the screen.
.The 3 routes may not always be different.
CONFIRMING A ROUTE
1. Highlight [Route Info.] and push<ENTER>.
2. Highlight the preferred information item and
push<ENTER>.
3. Push<BACK>to return to the previous
screen.
Available information
.Turn list:
Displays the details of the suggested route.
“Using turn list” (page 5-11)
.Preview:
Allows you to confirm the route by scrolling
on the map manually.
“Using route preview” (page 5-12)
.Simulation:
Allows you to view a simulation of the route.
“Confirming by simulation”
(page 5-12)
.Store route:
A calculated route can be stored. A max-
imum of 5 routes can be stored. Stored
routes can be easily retrieved and set as the
suggested route.
“STORING A ROUTE” (page 6-5)
Route guidance5-3

Black plate (92,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
.Map Scroll:
Displays a map screen where you can
confirm the location of the destination.
Even if you touch the map screen or operate
the directional buttons other than the up or
down button, the same map screen as when
[Map Scroll] is selected is displayed.
ADDING A DESTINATION OR WAY-
POINT
Before starting route guidance, you can add
destinations and/or waypoints. A total of 6
destinations or waypoints can be set.
1. Highlight [Add Way Pt.] and push
<ENTER>.
2. Set additional destinations or waypoints and
push<ENTER>.
INFO:
The method of searching for a location is the
same as the one for a destination.
“4. Setting a destination”
3. The selected location is displayed at the
center of the map. Highlight [Add to Route]
after confirming the location and push
<ENTER>.
INFO:
You can modify the location by selecting
[Alter Location]. The method of adjusting a
location is the same as the one for a
destination.
“ADJUSTING THE LOCATION OF
THE DESTINATION” (page 4-25)
4. Highlight [Destination] or [Waypoint] and
push<ENTER>.
The system starts calculating a route that
includes the added destination or waypoint.
When the calculation is finished, the route is
displayed.
5-4Route guidance

Black plate (93,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
INFO:
.If a waypoint was added, [More Routes]
cannot be selected.
.If a destination was added, the prior
destination becomes a waypoint.During route guidance, you can modify the route
conditions or confirm the route information. Set
the appropriate route condition according to
your purpose.
BASIC OPERATION
1. Push<ROUTE>.
2. Highlight the preferred setting item and
push<ENTER>.
3. Push<MAP>to return to the current
location map screen.
WARNING
Always stop the vehicle in a safe
location before modifying the route
conditions.
Modifying the route conditions while
driving may cause an accident.
Available setting items
.Cancel Route/Resume Route:
Allows you to cancel the current route
guidance. A cancelled route can also be
reactivated. If the suggested route is can-
celled, [Cancel Route Guidance] changes to
[Resume Route Guidance].
“DELETING/REACTIVATING A
ROUTE” (page 5-6)
.Edit:
Allows you to edit the route already set.
“EDITING A ROUTE” (page 5-7)
.Route Information:
Allows you to confirm the route by the route
information or simulation.
“CONFIRMING A ROUTE”
(page 5-11)
.Traffic Detour:
Allows you to manually search for an
alternative detour route taking the traffic
information into consideration.
“SEARCHING FOR A DETOUR
ROUTE TAKING TRAFFIC INFOR-
MATION INTO CONSIDERATION”
(page 5-12)
ROUTE SCREEN
Route guidance5-5