destination NISSAN MAXIMA 2012 A35 / 7.G 08IT Navigation Manual

Black plate (127,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
1. Highlight [Edit] and push <ENTER>.
2. Highlight [Phone No.] and push <ENTER>.
The telephone number entry screen is
displayed.3. Enter the telephone number of the home or stored location.
“Number input screen” (page 2-15)
4. Highlight [OK] and push <ENTER>.
The telephone number is stored.
INFO:
If the phone number of the home or a location is
stored, the phone number can be used to search
for the destination even if it is not included in the
map data.
Group (only for stored locations)This groups the stored locations.
By grouping the stored locations, the [By Group]
option of the sort function can be used more
effectively in the [Sort Entries] mode.1. Highlight [Group] and push <ENTER>.2. Highlight the preferred group and push
<ENTER> .
When the indicator of the selected group
illuminates, the stored location is classified
into the applicable group.
Entry Number (only for stored locations)Index the position numbers of any two stored
locations in the list.1. Highlight [Entry Number] and push <ENTER> .
A list of stored locations is displayed.2. Highlight the stored addresses that you want to change and push <ENTER>.
The position numbers of the selected stored
locations are changed.
Storing location/route
6-13

Black plate (133,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
7. A confirmation message is displayed. Con- firm the contents of the message, highlight
[Yes] and push <ENTER>. The stored item
is deleted from the Address Book.Other settingsA stored address can also be deleted using the
following procedure.1. Push <DEST>.
2. Highlight [Address Book] and push <ENTER> .
3. Highlight [Store/Edit] and push <ENTER>.
4. Highlight [Edit or Delete an Entry] and push <ENTER> .
5. Highlight a preferred address and push <ENTER> .
“4. Setting destination”
INFO:
This procedure applies only for deleting a stored
home or address. A stored route, tracking or
avoid area cannot be deleted using this proce-
dure.
DELETING INDIVIDUAL ITEM ON THE
MAP1. Align the cross pointer over the preferred stored location for deletion by moving on the
map. Then push <ENTER>.2. Highlight [Delete] and push <ENTER>.
3. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push <ENTER>.
The stored item is deleted from the Address
Book.DELETING ALL STORED ITEMS1. Push <SETTING> .
2. Highlight [Navigation] and push <ENTER>.3. Highlight [Address Book] and push
<ENTER> .
Storing location/route
6-19

Black plate (134,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
6-20
Storing location/route
4. Highlight [Delete Stored Items] and push <ENTER> .5. Highlight the preferred item for deletion and
push <ENTER> .
Items that can be deleted
.
[Delete Home Location]: Deletes the home location.
.
[Delete Address Book]:Deletes all stored locations.
.
[Delete Stored Routes]:Deletes all stored routes.
.
[Delete Current Tracking]:Deletes the current tracked route.
.
[Delete Stored Tracking]:Deletes all stored tracked routes.
.
[Delete Avoid Areas]:Deletes all stored Avoid Areas.
.
[Delete Stored Voicetags]:Deletes all stored voicetags.
.
[Delete Previous Destinations]:Deletes all or one of the previous
destinations.
.
[Delete Previous Start Point]:Deletes all previous start points.
.
[Delete Learned Route]:Deletes all system learned routes.
6. A confirmation message is displayed. Con- firm the contents of the message, highlight
[Yes] and push <ENTER>. The stored items
are deleted from the Address Book.Other settingsAll stored addresses can also be deleted using
the following procedure.1. Push <DEST>.
2. Highlight [Address Book] and push <ENTER> .

Black plate (135,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
3. Highlight [Store/Edit] and push <ENTER>.
4. Highlight [Delete All Addressbook Entries] and push <ENTER> .
“4. Setting destination”
INFO:
This procedure applies only for deleting a stored
home or address. A stored route, tracking or
avoid area cannot be deleted using this proce-
dure. The information of the stored home and ad-
dresses can be exported and imported using a
USB memory.
1. Insert a USB memory and push
<SETTING> .
INFO:
Refer to the vehicle Owner’s Manual for the
location of the USB connector.
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Address Book] and push
<ENTER> .4. Highlight [Transfer Address Book] and push
<ENTER> .5. Highlight [Download Address Book to USB]
or [Download Address Book from USB] and
push <ENTER> .
Storing location/route
6-21
TRANSFERRING INFORMATION TO/
FROM ADDRESS BOOK

Black plate (137,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
7 Viewing technical informationInformation screen .................................................................... 7-2 Basic operation .................................................................... 7-2
Viewing information about current vehicle location .......... 7-3 Basic operation .................................................................... 7-3
Viewing available traffic information ..................................... 7-3 Basic operation .................................................................... 7-4
Info on route ........................................................................\
. 7-4
Nearby traffic info. ............................................................... 7-5
Display urgent traffic information .................................... 7-5
Traffic information on map ................................................ 7-6
Traffic information settings ................................................ 7-7 Viewing available weather information ................................ 7-8
Displaying weather information screen ....................... 7-9
Destination weather on suggested route screen ... 7-15
Automatically display warnings/watches .................. 7-15
Map update ........................................................................\
..... 7-17
Viewing navigation system unit identification ................. 7-18 Basic operation .............................................................. 7-18
Viewing navigation system version information ............. 7-18 Basic operation .............................................................. 7-18
Viewing GPS current location information ..................... 7-19 Basic operation .............................................................. 7-19

Black plate (139,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
This displays the information about the vehicle
location on the route when driving according to
route guidance.BASIC OPERATION1. Push <INFO>.
2. Highlight [Where am I?] and push <ENTER> .
3. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.Contents of vehicle location information*1
Next Street:
Displays the next street on the route.
*2
Current Street:
Displays the current street on the route.
*3
Previous Street:
Displays the previous street on the route.
*4
Displays the distance to the next intersec-
tion on the route.
*5
Displays the distance traveled from the
previous intersection on the route. XM NavTraffic
®information is a subscription
service offered by XM
®Satellite Radio.
This service provides real-time information
regarding traffic flow, accidents, road construc-
tion and other incidents, where available.
XM NavTraffic
®
combines information from
commercial and public traffic data providers
including government departments of transpor-
tation, police, emergency services, road sen-
sors, cameras and aircraft reports. The traffic
information is broadcast to the vehicle by the
XM
®satellites. Available traffic information on
the route the driver selected is shown on the
navigation screen so traffic conditions between
you and the destination are known. Three types
of real-time traffic information for major road-
ways are shown on the navigation system:
* Unscheduled traffic data for example, acci-
dents and disabled vehicles.
* Scheduled traffic data, for example road
construction and road closures.
* Traffic flow information (rate of speed data) .
WARNING
XM NavTraffic
®
information is not a
substitute for attentive driving. Traffic
conditions change constantly and
Viewing technical information
7-3
VIEWING INFORMATION ABOUT
CURRENT VEHICLE LOCATION VIEWING AVAILABLE TRAFFIC
INFORMATION

Black plate (140,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
7-4
Viewing technical information
emergency situations can arise without
warning. Relying only on XM NavTraf-
fic®information may lead to a collision
and could result in serious personal
injury.NOTE:
Flow information is provided only for
roads equipped with traffic sensors and
is not available in all markets covered by
the service. Flow data may not be available
on portions of a road that is under
construction.
XM NavTraffic
®information is available in limited
markets. To subscribe or to check if this service
is available in the area:
call 1-800-XM-RADIO (1-800-967-2346) or
see www.xmradio.com/navtraffic
INFO:
If a contract is not completed for XM NavTraffic
®
traffic information service, a message appears,
and it will not be possible to check the
information on the traffic information system.
BASIC OPERATION1. Push <INFO>.
2. Highlight [Traffic Info] and push <ENTER>.
3. Highlight the preferred information and push <ENTER> .
4. Push <BACK> to return to the previous
screen.
Push <MAP> to return to the current
location map screen.Available items. [Info on Route]:
Displays the list of traffic information found
on the recommended route from the current
vehicle location to the destination.
. [Nearby Traffic Info]:
Displays the list of traffic information around
the current vehicle location.
INFO ON ROUTEThis is only available when a route is set.
The list of traffic information found on the
recommended route from the current vehicle
location to the destination is displayed. The
detailed information about displayed events can
also be checked.1. Highlight [Info. on Route] and push
<ENTER> . A list screen is displayed.2. Highlight the event to check the detailed
information, and push <ENTER>.

Black plate (142,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
7-6
Viewing technical informationINFO:
. Urgent traffic information is displayed re-
gardless of whether the traffic information
system is on or off.
. When there are multiple urgent events, the
event with the shortest direct distance from
the current location is displayed.
. If the urgent event is on the recommended
route, and if a detour is found, the detour
route notification screen is displayed when
the vehicle approaches the detour point.
TRAFFIC INFORMATION ON MAPWith subscription to XM NavTraffic
®service,
traffic information is displayed on both Plan View
and Birdview
TM
map screen.
See “Notes on Traffic Information” for further
information.
“Notes on XM NavTraffic
®information”
(page 10-13)
Screen information*1
Road conditions
Free Flow: Green arrow
Moderate traffic: Yellow arrow
Heavy traffic: Red arrow
Section affected by serious traffic event:
Purple dashed arrow
*2
Estimated travel time to destination
calculated with consideration of traffic
information on route.
*3
Traffic information icon:
If the route is not already set, all of the
traffic information icons on the map
screen are displayed in color. When
the route is already set, the icons on the
route are displayed in color, and the
icons outside the route are displayed in
gray.: Accident: Closed road

Black plate (144,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
7-8
Viewing technical information
4. Highlight the preferred setting and push <ENTER> . The indicator for the selected
setting illuminates.Available setting items. [Use Traffic Info]:
Enables all traffic information related func-
tions.
. [Show Incidents on Map]:
Displays the traffic incidents (e.g., accident)
on the map screen.
. [Show Traffic Flow on Map]:
Displays the traffic flow with an arrow on the
map screen.
. [Blink Red Traffic Flow]:
Blinks the red traffic flow lines that represent
congestions.
. [Traffic Announcement]:
Announces the traffic information event on the route.
INFO:
. Even when [Show Traffic Flow on Map] and
[Show Incidents on Map] are set to off, the
list display of [Info on Route] and [Nearby
Traffic Info] will not be affected.
. Even when [Traffic Announcement] is set to
off, the route guidance will not be affected.
Also, the announcement of emergency
information and weather information will not
be turned off.Voice command
1. Push <TALK
>located on the steering
wheel switch.
2. After the tone sounds, speak a command.
To turn on or off the traffic information system:
“Information” “Traffic Information” (Standard
mode)
“Traffic Information” (Alternate command mode) XM NavWeather
TM
information is a subscription
service offered by XM®Satellite Radio.
This service provides real-time information
regarding current weather, temperature, warn-
ings, road conditions and forecasts where
available. The weather information is broadcast
to the vehicle by the XM satellites.
The service enables you to view the following
information on the navigation system. . Current weather information icon of the
destination on the screen of suggested
route
. Detailed weather information and forecasts
of an area of interest
. Countrywide and local maps with the
current weather, temperature, warnings and
road condition information
. List of warning/watches events detected
around the current location
. Pop-up messages on the navigation screen
with voice announcements when warnings
and watches are detected around the
current location
VIEWING AVAILABLE WEATHER
INFORMATION

Black plate (146,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
7-10
Viewing technical information
tion.
. Weather Map:
Displays the current weather map for the
preferred area.
. Temperature Map:
Displays the current temperature map for the
preferred area.
. Warnings Map:
Displays the current watches/warnings map
for the preferred area.
. Road Condition Map:
Displays the current road condition map for
the preferred area.
Selecting cityWhen displaying various weather information
screens by pushing <INFO>, the range can be
specified for the weather information from
among the current location (local) , destination,
countrywide (nation) or a specified city.
The city can be specified by selecting one from
the list that is displayed.
1. Push <INFO>.
2. Highlight [Weather Info] and push <ENTER> .3. Highlight the preferred information and push
<ENTER> .
4. Highlight [Select Other City from Menu] and
push <ENTER> .5. Highlight the preferred state from the list
and push <ENTER> .