warning light NISSAN MAXIMA 2017 A36 / 8.G Nissan Connect Navigation Manual

*5<SOURCE>:
Push to change the audio source to the
available mode.
“Selecting audio source” (page 3-12)
*6<>:
Push + or - to adjust the volume.
INFO:
Steering wheel switches are mainly for the
vehicle information display control and may not
be able to operate the touch screen display
depending on the conditions. Follow the pop-up
guide messages and labels shown on the vehicle
information display.
Some of the information displayed on the vehicle
information display are linked with the touch
screen display.
For other details of the vehicle information
display, refer to the vehicle Owner’s Manual.
DISPLAY COMMANDER (if so
equipped)
With this system, the same operations as those
for the control panel are possible using the
Display Commander.
*1<MAP/VOICE>:
Push to display the vehicle’s current loca-
tion on the map.
Push and hold to hear the current guidance
for a programmed route.
*2<MENU>:
Push to display the HOME MENU screen.
*3<BACK>:
Push to go back to the previous screen.
*4<OK>:
Push to enter the selected item.
If this button is pushed while a map is
displayed, the map menu is shown on the
display.
“Map Menu screen” (page 6-13)
*5Center dial/Slide switch:
Turning operation
Turn the dial to scroll the highlighted item or
to adjust a setting (treble, brightness, etc.) .
While the map screen is displayed, adjust
the map scale by turning the dial.
Sliding operation
Depending on the screen, sliding the slide
switch can select areas on the screen or
scroll the pages.
“Basic operation” (page 2-9)
While the map screen is displayed, scroll
the map screen by sliding the switch.
USB (Universal Serial Bus) CONNEC-
TION PORTS AND AUX (auxiliary)
INPUT JACK
WARNING
Do not connect, disconnect or operate
the USB device while driving. Doing so
can be a distraction. If distracted you
could lose control of your vehicle and
cause an accident or serious injury.
2. Getting started
2-7