NISSAN PULSAR 2014 Owners Manual


> (GLW   0RGHO &$@
5-24
Starting anddriving
Self-test feature
GUID-25A1 2632-42C1- 404E-B198-BDCF201D1 532
The ABS includes electronic sensors,electricpumps,
hydraulic solenoids andacomputer. Thecomputer has
a built-in diagnostic featurethattests thesystem each
time youstart theengine andmove thevehicle atalow
speed inforward orreverse. Whentheself-test
occurs, youmay hear aªclunkº noiseand/or feela
pulsation inthe brake pedal. Thisisnormal anddoes
not indicate amalfunction. Ifthe computer sensesa
malfunction, itswitches theABS offand illuminates the
ABS warning lightonthe instrument panel.Thebrake
system thenoperates normally,but without anti-lock
assistance.
If the ABS warning lightilluminates duringtheself-test
or while driving, havethevehicle checked bya
NISSAN dealer.
Normal operation
GUID-731 7FE84-7D F1-491B-AE 03-A1D3516 5D3DC
The ABS operates atspeeds above5to 10 km/h (3to
6 MPH) .The speed variesaccording toroad condi-
tions.
When theABS senses thatoneormore wheels are
close tolocking up,the actuator rapidlyapplies and
releases hydraulic pressure. Thisaction issimilar to
pumping thebrakes veryquickly .You may feela
pulsation inthe brake pedalandhear anoise from
under thehood orfeel avibration fromtheactuator
when itis operating. Thisisnormal andindicates that
the ABS isoperating properly.However, thepulsation
may indicate thatroad conditions arehazardous and
extra careisrequired whiledriving.
GUID-161 29265-62AC- 4A0C-9B39-4 8A5D69BB276
When leaving yourvehicle unoccupied:
. Always takethekey with you-even when leaving
the vehicle inyour owngarage.
. Close allwindows completely andlock alldoors.
. Always parkyourvehicle whereitcan beseen.
Park inawell litarea during thenight.
. Ifthe security systemisequipped, useit-even for
a short period.
. Never leavechildren orpets inthe vehicle
unattended.
. Never leavevaluables insidethevehicle. Always
take valuables withyou.
. Never leavethevehicle documents inthe vehicle.
. Never leavearticles onaroof rack. Remove them
from therack andkeep andlock them inside the
vehicle.
. Never leavethespare keyinthe vehicle.
GUID-EBC9 7F4F-D1CC-40F0-8EC6-B8EC419B4 084
WARNING:
. Whatever thecondition, drivewithcaution.
Accelerate anddecelerate withgreat care.If
accelerating ordecelerating toofast, the
drive wheels willlose even more traction.
. Allow morestopping distanceincold weath-
er driving. Braking shouldbestarted sooner
than ondry pavement.
. Keep atagreater distance fromthevehicle
in front ofyou onslippery roads.
. Wet ice(08C ,328F andfreezing rain),very
cold snow andicecan beslick andvery
difficult todrive on.The vehicle willhave a
lot less traction orgrip under thesecondi-
tions. Try to avoid driving onwet iceuntil the
road issalted orsanded.
. Watch forslippery spots(glaring ice).These
may appear onanotherwise clearroadin
shaded areas.Ifapatch ofice isseen ahead,
brake before reaching it.Try not tobrake
while actually onthe ice, and avoid any
sudden steering maneuvers.
. Donot use cruise control onslippery roads.
. Snow cantrap dangerous exhaustgasunder
your vehicle. Keepsnow clearofthe exhaust
pipe andfrom around yourvehicle.
VEHICLE SECURITY COLDWEATHER DRIVING
&RQGLWLRQ


> (GLW   0RGHO &$@
BA TTER Y
GUID-C2C A590A-9BA8 -4FC1-9CCC-FDAEE005A29C
If the battery isnot fully charged duringextremely cold
weather conditions, thebattery fluidmayfreeze and
damage thebattery .To maintain maximum efficiency,
the battery shouldbechecked regularly.For details,
see ªBatteryº (P.8-18) .
ENGINE COOLANT
GUID-7A6B 0449-65CB-41B1-8B96-CE9ED7D4 46D2
If the vehicle isto be left outside withoutanti-freeze,
drain thecooling system, including theengine block.
Refill before operating thevehicle. Fordetails, see
ªChanging enginecoolantº (P.8-8) .
TIRE EQUIPMENT
GUID-64E9 A9C9-4E88-4008-996 7-F2592A02E8D2
1. Ifyou have snow tiresinstalled onthe front/rear
wheels ofyour vehicle, theyshould beofthe same
size, loading range,construction andtype (bias,
bias-belted orradial) asthe rear/front tires.
2. Ifthe vehicle isto be operated insevere winter
conditions, snowtiresshould beinstalled onall
four wheels.
3. Foradditional tractiononicy roads, studded tires
may beused. However, somecountries, provinces
and states prohibit theiruse.Check local,state
and provincial lawsbefore installing studdedtires.
Skid andtraction capabilities ofstudded
snow tires,onwet ordry surfaces, maybe
poorer thanthatofnon-studded snowtires.
4. Snow chains maybeused ifdesired. Makesure
they arethe proper sizeforthe tires onyour
vehicle andareinstalled according tothe chain
manufacturer's instructions.Usechain tensioners
when recommended bythe tire chain manufac-
turer toensure atight fit.Loose endlinks ofthe tire
chains mustbesecured orremoved toprevent the
possibility ofwhipping actiondamage tothe fenders
orunderbody .In addition, driveata
reduced speed,otherwise, yourvehicle maybe
damaged and/orvehicle handling andperfor-
mance maybeadversely affected.
SPECIAL WINTEREQUIPMENT
GUID-87 A06AD4-9E 97-40C3-AE6B-765ECE C9A0CA
It is recommended thatthefollowing itemsbecarried
in the vehicle duringthewinter:
. Ascraper andstiff-bristled brushtoremove ice
and snow fromthewindows.
. Asturdy ,flat board tobe placed underthejack to
give itfirm support.
. Ashovel todig thevehicle outofsnowdrifts.
P ARKING BRAKE
GUID-AA5 70ECB-5F9 D-4900-BD7B-65F841C1 AAD8
When parking inthe area where theoutside tempera-
ture isbelow 08C(328F) ,do not apply theparking
brake toprevent itfrom freezing. Forsafe parking:
. Place theshift lever inthe ªPº (Park) position
(Continuously Variable Transmission (CVT)mod-
el) .
. Place theshift lever inthe ª1º(1st) orªRº
(Reverse) position(Manual Transmission (MT)
model) .
. Securely blockthewheels.
CORROSION PROTECTION
GUID-605 EEE0A-D87 9-474B-9CA2 -428161302F6C
Chemicals usedforroad surface deicingareextremely
corrosive andwillaccelerate corrosionandthe
deterioration ofunderbody components suchasthe
exhaust system,fueland brake lines,brake cables,
floor panandfenders.
In the winter, theunderbody mustbecleaned
periodically. Foradditional information, see
ªCorrosion protectionº (P.7-5) .
For additional protection againstrustandcorrosion, which
mayberequired insome areas, consult a
NISSAN dealer.
Starting anddriving
5-25
&RQGLWLRQ


> (GLW   0RGHO &$@
5-26
Starting anddriving
MEMO
&RQGLWLRQ


> (GLW   0RGHO &$@
6 In case ofemergency
Hazard indicator flasherswitch ....
........................................................... .6-2
Flat tire....
........................................................... ............................................6-2
Stopping vehicle....
............................................ ...................................6-2
Preparing toolsandspare tire....
...................................................... .6-2
Blocking wheels....
................................................. ...............................6-3
Removing wheelcover(ifequipped) ....
........................................... 6-3
Removing tire....
...................................................... ...............................6-3
Installing sparetire....
............................................ ...............................6-4
Stowing damaged tireand tools ....
................................................... 6-5Jump
starting ....
............................................ ................................................ 6-5
Push starting ....
............................................ ................................................ 6-7
If your vehicle overheats ....
............................................ ...........................6-7
T owing yourvehicle ....
................................................. ...............................6-8
T owing precautions ....
...................................................... ..................6-8
T owing recommended byNISSAN ....
............................................ 6-8
&RQGLWLRQ


> (GLW   0RGHO &$@
6-2
In case ofemergency
GUID-DC13 C8BB-D3C5 -4ABE-9B25 -588DE68D 652F
SIC2475
The hazard indicator flasherswitchoperates regard-
less ofthe ignition switchposition exceptwhenthe
battery isdischarged.
The hazard indicator flasherisused towarn other
drivers whenyouhave tostop orpark under
emergency conditions.
When thehazard indicator flasherswitchispushed, all
turn signal lightswillflash. To turn offthe hazard
indicator flasher,pushthehazard indicator flasher
switch again.
GUID-731 D6607-4AF E-4B6B-8CEA- 9FC3B0AD95C8
If you have aflat tire, follow theinstructions asfollows.
ST OPPING VEHICLE
GUID-6E33 62D8-C092 -442C-91E5- C16CBD838BC7
WARNING:
. Besure toapply theparking brakefirmly.
. Besure tomove theshift lever tothe ªRº
(Reverse) position(ManualTransmission
(MT) model) .
. Besure tomove theshift lever tothe ªPº
(Park) position (Continuously Variable
T ransmission (CVT)model) .
. Never change tireswhen thevehicle ison a
slope, iceorslippery area.Thisishazardous.
. Never change tireswhen theoncoming
traffic isclose toyour vehicle. Callfor
professional roadassistance.
1. Safely movethevehicle offthe road away from
traffic.
2. Turn onthe hazard indicator flasherlights.
3. Park onalevel surface.
4. Apply theparking brake.
5. Continuously Variable Transmission (CVT)model:
Move theshift lever tothe ªPº (Park) position.
Manual Transmission (MT)model: Movetheshift
lever tothe ªRº (Reverse) position.
6. Turn offthe engine.
7. Open thehood:
.
T o warn other traffic.
.
T o signal professional roadassistance person-
nel that youneed assistance.
8. Have allpassengers getoutfrom thevehicle and
stand inasafe place, awayfromother traffic and clear
ofthe vehicle.
PREP ARING TOOLS ANDSPARE TIRE
GUID-0A9AE2 68-59C1-4A9D-8532-F659 3649CFF6
JVE0104X
Open theback door. Raise thecargo floorboard
*
1
.
Remove jackingtools.
HAZARD INDICATOR FLASHER
SWIT CH FLA
TTIRE
&RQGLWLRQ


> (GLW   0RGHO &$@
JVE0019X
The spare tireislocated underthecargo floorboard.
Loosen theclamp
*
2
and remove thespacer
*
1
and
take outthespare tire.
BL OCKING WHEELS
GUID-23 E7DEFB-5802 -48C9-BB6F-FDF013EA 5A18
MCE0001D
WARNING:
Be sure toblock theappropriate wheelto
prevent thevehicle frommoving, whichmay
cause personal injury.
Place suitable blocks
*
1
at both thefront andback of
the wheel diagonally oppositetheflattire
*
A
to
prevent thevehicle frommoving whenitis jacked up.
REMOVING WHEELCOVER (ifequipped)
GUID-03E2 B6E6-23A9-4 BB1-9E8F-DBC8ACF2A 577
SCE0630
WARNING:
Never useyour hands toremove thewheel
cover. Thismaycause personal injury.
T o remove thewheel cover, usethejack rod
*
1
as
illustrated.
Apply cloth
*
2
between thewheel andjack rodto
prevent damaging thewheel andwheel cover.
REMOVING TIRE
GUID-F9E36 B2A-7AA5-4 B04-8663-E2B23C1A97 CC
Jacking upvehicle
GUID-B3 7ACDE4-B 409-461F-93 E1-BF96415D 844D
JVE0016X
Jack -uppoints
In case ofemergency
6-3
&RQGLWLRQ


> (GLW   0RGHO &$@
6-4
In case ofemergency
SCE0504
WARNING:
. Besure toread andfollow theinstructions in
this section.
. DO NOTGET UNDER AVEHICLE THATIS
SUPPORTED BY A JACK .
. Never useajack which isnot provided with
your vehicle.
. The jack, which isprovided withyour vehicle,
is designed onlytolift your vehicle duringa
tire change. Donot use thejack provided
with your vehicle onother vehicles.
. Never jackupthe vehicle atalocation other
than thejack -uppoint thatisspecified.
. Never liftthe vehicle morethannecessary.
. Never useblocks onorunder thejack.
. Never startorrun theengine whilethe
vehicle ison the jack. Thevehicle maymove
suddenly, andthismay cause anaccident.
. Never allowpassengers toremain inthe
vehicle whilethetire isoff the ground. .
Besure toread thecaution labelattached to
the jack body before using.
1. Place thejack directly underthejack-up point as
illustrated sothat thetop ofthe jack contacts the
vehicle atthe jack-up point.
The jack should beplaced onfirm level
ground.
2. Align thejack head between thetwo notches
located atthe jack-up point ofeither thefront or
the rear section.
3. Fitthe groove ofthe jack head between the
notches asshown.
4. Loosen eachwheel nut,counterclockwise, oneor
two turns withthewheel nutwrench.
Do not remove thewheel nutsuntil thetire is
off the ground.
5. Carefully raisethevehicle untiltheclearance
between thetireand ground isachieved.
6. To lift the vehicle, securely holdthejack lever and
rod with both hands andturn thejack lever.
Removing tire
GUID-972 115C8-16B 3-429F-9DF 1-CC69110A0 0AF
1. Remove thewheel nuts.
2. Remove thedamaged tire.
CAUTION:
The tireisheavy. Besure thatyour feetareclear
from thetire and usegloves asnecessary to
avoid injury.
INST ALLING SPARE TIRE
GUID-028 A15EE-D4 CA-4435-AF C6-94D3C9E C3071
SCE0039
WARNING:
. Never usewheel nutswhich arenot provided
with your vehicle. Incorrect wheelnutsor
improperly tightenedwheelnutsmaycause
the wheel tobecome looseorcome off.This
could cause anaccident.
. Never useoilorgrease onthe wheel studs
or nuts. Thismaycause thewheel nutsto
become loose.
1. Clean anymud ordirt from thesurface between
the wheel andhub.
&RQGLWLRQ


> (GLW   0RGHO &$@
2. Carefully putthespare tireonand tighten the
wheel nutswithyour fingers. Checkthatallthe
wheel nutscontact thewheel surface horizontally .
3. Tighten thewheel nutsalternately andevenly in
the sequence illustrated(
*
1
-
*
5
) , more than2
times withthewheel nutwrench, untilthey are
tight.
4. Lower thevehicle slowlyuntilthetire touches the
ground.
5. Tighten thewheel nutssecurely ,with thewheel
nut wrench, inthe sequence illustrated.
6. Lower thevehicle completely .
Tighten thewheel nutstothe specified torque
with atorque wrench assoon aspossible.
Wheel nuttightening torque:
108 N´m (11kg-m, 80ft-lb)
The wheel nutsmust bekept tightened to
specification atall times. Itis recommended
that thewheel nutsbetightened tospecification
at each lubrication interval.
WARNING:
Retighten thewheel nutswhen thevehicle has
been driven for1,000 km(600 miles) (alsoin
cases ofaflat tire, etc.).
ST OWING DAMAGED TIREANDTOOLS
GUID-1FAB B527-F376-4605-B0E 8-545A3C1B479F
WARNING:
Be sure thatthetire, jack andtools usedare
properly storedafteruse.Such items can
become dangerous projectilesinan accident or
sudden stop.
1. Securely storethejack, tools andthedamaged
tire inthe storage area.
2. Replace thecargo floorboard.
3. Close theback door.
GUID-CA 3FC571-40 A7-4E0F-A6D6-412F4AB 6C190
WARNING:
. Incorrect jumpstarting canlead toabattery
explosion. Thebattery explosion mayresult
in severe injuryordeath. Itmay also result in
damage tothe vehicle. Besure tofollow the
instructions inthis section.
. Explosive hydrogengasisalways present in
the vicinity ofthe battery. Keepallsparks
and flames awayfromthebattery.
. Always wearsuitable eyeprotection and
remove rings,bracelets, andanyother jew-
elry whenever workingonornear abattery.
. Never leanover thebattery whilejump
starting.
. Never allowbattery fluidtocome into
contact witheyes, skin,clothes orthe
vehicle's paintedsurfaces. Batteryfluidisa
corrosive sulfuricacidwhich cancause
severe burns.Ifthe fluid comes intocontact
with anything, immediately flushthecon-
tacted areawithplenty ofwater.
. Keep thebattery outofthe reach ofchildren.
. The booster batterymustberated at12
volts. Useofan incorrectly ratedbattery will
damage yourvehicle.
. Never attempt tojump startafrozen battery.
It could explode andcause serious injury.
In case ofemergency
6-5
JUMP
STARTING
&RQGLWLRQ


> (GLW   0RGHO &$@
6-6
In case ofemergency
JVE0108X
1. Ifthe booster batteryisin another vehicle
*
B
,
position thetwo vehicles
*
A
and
*
B
to bring the
batteries intoclose proximity toeach other.
CAUTION:
If the battery ofvehicle
*
A
equipped withthe
Intelligent Keysystem isdischarged, theignition
switch cannot bemoved fromtheªLOCKº
position and,ifthe steering lockisengaged,
the steering wheelcannot bemoved. Connect
the jumper cablestothe booster vehicle
*
B
before turning theignition switchanddisenga-
ging thesteering lock.
2. Apply theparking brake.
3. Continuously Variable Transmission (CVT)model:
Move theshift lever tothe ªPº (Park) position.
Manual Transmission (MT)model: Movetheshift
lever tothe ªNº (Neutral) position.
4. Switch offallunnecessary electricalsystems
(headlights, heater,airconditioner, etc.).
5. Place theignition switchinthe ªLOCKº position. 6.
Remove thevent caps, ifequipped, onthe battery .
7. Cover thebattery withafirmly wrung outmoist
cloth toreduce thehazard ofan explosion.
8. Connect thejumper cablesinthe sequence as
illustrated (
*
1
,
*
2
,
*
3
,
*
4
) .
CAUTION:
. Always connect positive +topositive +and
negative 7tobody ground, NOTto the
battery's negative7.
. Besure thatthejumper cablesdonot touch
moving partsinthe engine compartment.
. Besure thatthejumper cable's clamps do
not contact anyother metal.
9. Start theengine ofthe booster vehicle
*
B
and let
it run forafew minutes.
10. Depress theaccelerator pedalofthe booster
vehicle
*
B
at about 2,000 rpm.
11. Start theengine ofthe jumped vehicle
*
A
in the
normal manner.
CAUTION:
Never keepthestarter motorengaged formore
than 10seconds. Ifthe engine doesnotstart
right away, placetheignition switchinthe ªOFFº
position andwait atleast 10seconds before
trying again.
12. After theengine isstarted, carefully disconnect
the jumper cablesinthe opposite sequence from
that illustrated (
*
4
,
*
3
,
*
2
,
*
1
) .
13. Remove anddispose ofthe cloth asitmay be
contaminated withcorrosive acid.
14. Replace thevent caps, ifremoved.
&RQGLWLRQ


> (GLW   0RGHO &$@
GUID-9D9 20AF3-899 E-4949-B9DE-B9DA38E BCD0D
Do not attempt tostart theengine bypushing the
vehicle.
CAUTION:
. Continuously Variable Transmission (CVT)/
Manual Transmission (MT)model cannot be
started bypushing. Attempting todo somay
cause damage tothe transmission.
. Three-way catalystequipped modelshould
not bestarted bypushing. Attempting todo
so may cause damage tothe catalyst.
. Never trytostart theengine bytowing.
When theengine starts,theforward surge
could cause thevehicle tocollide withthe
towing vehicle.
GUID-6FF3 F0CC-8B6E -46AC-926D-3 EB9C863FE4D
WARNING:
. Never continue drivingifyour vehicle over-
heats. Doingsocould cause avehicle fire.
. Never openthehood ifsteam iscoming out.
. Never remove theradiator orcoolant reser-
voir capwhile theengine ishot. Ifthe
radiator orcoolant reservoir capisremoved
when theengine ishot, pressurized hot
water willspurt outand possibly cause
burning, scalding orserious injury.
. Ifsteam orcoolant iscoming fromthe
engine, standclearofthe vehicle toprevent
getting burned.
. The engine cooling fanwill start atanytime
when thecoolant temperature exceedspre-
set degrees.
. Becareful nottoallow yourhands, hair,
jewelry orclothing tocome intocontact with,
or toget caught inthe cooling fanordrive
belts.
If your vehicle isoverheating (indicatedbythe high
temperature indicator),or ifyou feel alack ofengine
power, detectunusual noise,etc.,takethefollowing
steps:
1. Safely movethevehicle offthe road away from
traffic.
2. Turn onthe hazard indicator flasherlights.
3. Apply theparking brake.
4. Continuously Variable Transmission (CVT)model:
Move theshift lever tothe ªPº (Park) position.
Manual Transmission (MT)model: Movetheshift
lever tothe ªNº (Neutral) position.
DO NOTST OP THE ENGINE . 5.
Open allthe windows.
6. Turn offthe airconditioner. Movethetemperature
control tomaximum hotand thefancontrol tohigh
speed.
7. Get outfrom thevehicle.
8. Visually inspectandlisten forsteam orcoolant
escaping fromtheradiator beforeopening the
hood. Wait until nosteam orcoolant canbeseen
before proceeding.
9. Open theengine hood.
10. Visually inspectifthe cooling fanisrunning.
11. Visually inspecttheradiator andradiator hosesfor
leakage.
If the cooling fanisnot running orthe coolant is
leaking, stoptheengine.
12. After theengine coolsdown, checkthecoolant
level inthe reservoir withtheengine running. Do
not open theradiator cap.
13. Add coolant tothe reservoir ifnecessary .
Have yourvehicle inspected/repaired ataNISSAN
dealer.
In case ofemergency
6-7
PUSH
STARTING IFYOUR VEHICLE OVERHEA TS
&RQGLWLRQ