indicator NISSAN PULSAR 2015 Owner's Manual


> (GLW   0RGHO &$@
3-12
Pre-driving checksandadjustments
Symptom Possible cause Actiontotake
When pushing theignition switch The
Intelligent Key system warning light
in the meter illuminates inyellow . It
warns ofamalfunction withthe
electrical steeringlocksystem orthe
Intelligent Key system. Contact
aNISSAN dealer.
USING REMOTEKEYLESS ENTRYFUNC-
TION
GUID-2AE42 741-EBE2-4FE8-BF1B-689F0094A CB4
SP A2252
*
1
L OCK button
*
2
UNL OCK button
*
3
P ANIC button
Operating range
GUID-D3 BB5654-718 5-45AE-9C12-C3962F5F9FD5
It is possible tolock/unlock alldoors including theback
door using theremote keyless entrysystem and
provides thepanic alarm. Theoperating distance
depends upontheconditions aroundthevehicle. To
securely operatethelock andunlock buttons,
approach thevehicle toabout 1m (3.3 ft)from the
door.
The remote keyless entrysystem willnot function under
the following conditions:
. When theIntelligent Key isnot within the
operational range. .
When theIntelligent Key battery isdischarged.
For information regardingthereplacement ofabattery ,
see ªIntelligent Key batteryº (P.8-20) .
Locking doors
GUID-7AB F6AB4-A10F-4 5F7-A6A2-FD87D2681DA F
When youlock orunlock thedoors, thehazard
indicator willflash andtheoutside chimewillsound
as aconfirmation.
1. Place theignition switchinthe ªOFFº position and
carry theIntelligent Key .
2. Close alldoors (including theback door).
3. Push theªLOCKº
button
*
1
on the
Intelligent Key .
4. Alldoors willbelocked.
5. Operate thedoor handles toconfirm thatthe
doors havebeen securely locked.
CAUTION:
After locking thedoors usingtheIntelligent Key,
be sure thatthedoors havebeen securely
locked byoperating thedoor handles.
Unlocking doors
GUID-686322 49-BE76-4075-AE4E-73EE90E081 B8
1. Push theªUNL OCKº
button
*
2
on the
Intelligent Key .
2. Alldoors (including theback door) willbe
unlocked. Automatic
relock:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
All doors willbelocked automatically unlessoneofthe
following operations isperformed within30seconds
after pushing theªUNL OCKº
button
*
2
on the
Intelligent Key while thedoors arelocked. Ifduring this
30-second timeperiod, theªUNL OCKº
button
*
2
on the Intelligent Key ispushed, alldoors willbe
locked automatically afteranother 30seconds.
. Opening anydoor orback door.
. Pushing theignition switch.
Using panicalarm
GUID-D96 10C4E-3B6 8-4E70-996 1-4400E269C 2F0
If you arenear yourvehicle andfeelthreatened, you
may activate thealarm tocall attention asfollows:
1. Push theªPANICº
button
*
3
on the
Intelligent Key for more than1second.
2. The theft warning alarmwillstay onfor 25
seconds.
3. The panic alarmstops when:
. Ithas runfor25 seconds, or
. Any ofthe buttons onthe Intelligent Key are
pushed. (Note:PANIC button should bepushed
for more than1second.)
&RQGLWLRQ


> (GLW   0RGHO &$@
HAZARD INDICATOR AND OUTSIDE
CHIME OPERATION
GUID-84D278 A3-8EED-4771-B809-191F06531A2 A
When youlock orunlock thedoors orthe back door
with therequest switchorthe remote keyless entry
function, thehazard indicator willflash andtheoutside
chime willsound asaconfirmation.
The following descriptions showhowthehazard
indicator andoutside chimewillactivate whenlocking
or unlocking thedoors orback door.
Operation DOORLOCK DOORUNLOCK
Intelligent Keysystem (usingdoor
handle orback doorrequest
switch) HAZARD
-once
OUTSIDE CHIME-once HAZARD
-twice
OUTSIDE CHIME-twice
Remote keylessentrysystem
(using
or
button) HAZARD
-once
OUTSIDE CHIME-once HAZARD
-twice
OUTSIDE CHIME-twice
Pre-driving checksandadjustments
3-13
&RQGLWLRQ


> (GLW   0RGHO &$@
3-14
Pre-driving checksandadjustments
GUID-C3B 71A2F-226 3-4BD0-AEF 3-1E0562880E42
Y our vehicle isequipped withNISSAN Anti-theft
System (NATS)*.
The security condition willbeshown bythe security
indicator light.
(* immobilizer)
NISSAN ANTI-THEFT SYSTEM (NATS)
GUID-036 EA410-EB76 -4EA4-B53B-6ABB43 43E2A9
The NISSAN Anti-Theft System (NATS) willnotallow
the engine tostart without theuse ofthe registered
NA TS key.
If the engine doesnotstart using theregistered NATS
key ,it may bedue tointerference causedby:
. Another NATS key.
. Automated tollroad device.
. Automated paymentdevice.
. Other devices thattransmit similarsignals.
Start theengine usingthefollowing procedure:
1. Remove anyitems thatmay becausing the
interference awayfromtheNATS key.
2. Leave theignition switchinthe ªONº position for
approximately 5seconds.
3. Place theignition switchinthe ªOFFº orªLOCKº
position, andwait approximately 10seconds.
4. Repeat steps2and 3again.
5. Start theengine.
6. Repeat thesteps above untilallpossible inter-
ferences areeliminated.
If this procedure allowstheengine tostart, NISSAN
recommends placingtheregistered NATS key sepa-
rate from other devices toavoid interference.
Security indicator light
GUID-769789 21-F8F5-4B9C-B81F-AAE 7B38642C 4
SIC2045
The security indicator lightislocated onthe meter
panel. Itindicates thestatus ofNA TS.
The light operates whenever theignition switchisin
the ªLOCKº ,ªOFFº orªACCº position. Thesecurity
indicator lightindicates thatthesecurity systems on
the vehicle areoperational.
If NA TS ismalfunctioning, thislight willremain onwhile
the ignition switchisin the ªONº position.
If the light remains onand/or theengine does
not start, contact aNISSAN dealerforNATS
service assoon aspossible. Besure tobring all
NA TS keys thatyouhave when visiting aNISSAN
dealer forservice.
GUID-84DFC8 CD-2300-48BD-B6F0-707623C404FF
WARNING:
. The hood mustbeclosed andlatched
securely beforedriving. Failuretodo so
could cause thehood tofly open andresult
in an accident.
. Never openthehood ifsteam orsmoke is
coming fromtheengine compartment to
avoid injury.
SECURITY SY STEM (ifequipped) HOOD
&RQGLWLRQ


> (GLW   0RGHO &$@
MANUAL AIRCONDITIONER
GUID-B9 F02A01-74 43-43F7-84E C-9EEBAFE5 A528
JVH0499X
1. Airintake lever(Outside aircirculation ª
º
/Air recirculation
ª
º)
2. Airflow control dial
3. Fanspeed control
ª
º dial
4. ªA/Cº (AirConditioner) button
5. Temperature controldial
6. Rear defogger
ª
º button (SeeªDefogger
switchº (P.2-21) .)
T o turn offthe heater andairconditioner, turnthefan
speed control ª
º dial tothe ªOFFº (0)position.
Controls
GUID-3B92B 3BB-498F-4734-93D4 -D381D317DF19
Outside aircirculation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Move theairintake levertothe ª
º position. Theair
flow isdrawn fromoutside thevehicle.
Air recirculation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Move theairintake levertothe ª
º position. Theair
flow iscirculated insidethevehicle. Air
flow control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn theairflow control dialtochange theairflow
mode.
Ð Airflows fromthecenter andside
ventilators.
Ð Airflows fromthecenter andside
ventilators andfoot
outlets.
Ð Airflows mainly fromthefoot outlets.
Ð Airflows fromthefront defogger andfoot
outlets.
Ð Airflows mainly fromthefront defogger
outlets.
Fan speed control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn thefanspeed control ª
º dial clockwise to
increase thefanspeed.
T urn thefanspeed control ª
º dial counterclock -
wise todecrease thefanspeed. A/C
(AirConditioner) operation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Push theªA/Cº button toturn onoroff the air
conditioner. Whentheairconditioner ison, the ªA/Cº
indicator lightonthe button illuminates.
T emperature control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn thetemperature controldialtoset the desired
temperature. Turn thedial between themiddle andthe
right position toselect thehot temperature. Turn the
dial between themiddle andtheleftposition toselect
the cool temperature.
Heater operation
GUID-ED0 DE5AF-669 2-440D-A937 -F37C2F707C77
Heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused todirect heated airtothe foot
outlets.
1. Move theairintake levertothe ª
º position for
normal heating.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
V entilation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode directs outside airtothe side andcenter
ventilators.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position.
Heater andairconditione r,and audio system
4-7
&RQGLWLRQ


> (GLW   0RGHO &$@
4-8
Heater andairconditioner ,and audio system
Defrosting ordefogging:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode directs theairtothe defogger outletsto
defrost/defog thewindows.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
. To remove frostfromtheoutside surfaceofthe
windshield quickly,turn thetemperature control
dial tothe maximum hotposition andthefan
speed control ª
º dial tomaximum position.
. Ifit is difficult todefog thewindshield, turnthe
ª A/Cº button on.
Bi-level heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode directs coolairfrom theside andcenter
ventilators andwarm airfrom thefoot outlets. When
the temperature controldialisturned tothe maximum
hot orcool position, theairbetween theventilators and
the foot outlets isthe same temperature.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position. Heating
anddefogging:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode heatstheinterior anddefogs thewindows.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe maximum
hot (right) position.
5. Push theªA/Cº button on.(The ªA/Cº indicator
light willilluminate.)
Air conditioner operation
GUID-D4 7C17DA-AC3 0-4F0E-ADA4 -8C2DE01347BA
The airconditioner systemshouldbeoperated for
approximately 10minutes atleast once amonth. This
helps prevent damage tothe airconditioner system
due tothe lack oflubrication.
Cooling:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused tocool anddehumidify theair.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Push theªA/Cº button on.(The ªA/Cº indicator
light willilluminate.)
5. Turn thetemperature controldialtothe desired
position between themiddle andthecool (left)
position.
A visible mistmaybeseen coming fromtheventilators
in hot, humid conditions asthe airiscooled rapidly.
This does notindicate amalfunction. Dehumidified
heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused toheat anddehumidify theair.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Push theªA/Cº button on.(The ªA/Cº indicator
light willilluminate.)
5. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
Dehumidified defogging:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused todefog thewindows and
dehumidify theair.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Push theªA/Cº button on.(The ªA/Cº indicator
light willilluminate.)
5. Turn thetemperature controldialtothe desired
position.
&RQGLWLRQ


> (GLW   0RGHO &$@
AUT OMA TICAIR CONDITIONER
GUID-EEDAB BD4-5460-4E74-8DA 6-F18F780C 0A98
JVH0053X
* The switch layoutinthe illustration isfor the Left-
Hand Drive(LHD) model. FortheRight-Hand Drive
(RHD) model, theswitch layoutwillbethe opposite.
1. Temperature controlbuttons (driverside)
2. ª
º rear defogger button(SeeªDefogger
switchº (P.2-21) .)
3. ª
º front defogger button
4. Display screen
5. ª
º Air recirculation button
6. ª
º Outside aircirculation button
7. Temperature controlbuttons (passenger side)
8. ªON´OFFº button
9. ªAUT Oºbutton
10. ª
º fan speed control button
11. ªMODEº button
12. ªA/Cº (AirConditioner) button
13. ªDUAL ºzone control ON/OFF button
Automatic operation(AUTO)
GUID-3C17 66E6-9820-4047-AC2F-4 76AFCB48C8B
The AUTOmode maybeused year-round asthe
system automatically controlstheairconditioner toa
constant temperature, airflow distribution andfan
speed afterthedesired temperature isset manually .
T o turn theheater andairconditioner onoroff, push
the ªON´OFFº button.
Cooling anddehumidified heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. Push theªAUT Oºbutton (theAUTOindicator light
will illuminate) .
2. Ifthe A/C indicator lightisnot illuminated, push
the ªA/Cº button (theA/C indicator lightwill
illuminate) .
3. Push thetemperature controlbuttons
(ª
º and
ª
º) to set the desired temperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªAUT Oºbutton (theAUTO
indicator lightwillilluminate) changesboththe
driver andpassenger sidetemperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªDUAL ºbutton (theDUAL
indicator lightwillilluminate) allowstheuser to independently
changethedriver andpassen-
ger side temperatures withthecorresponding
temperature controlbuttons (ª
º and
ª
º) .
.
T o cancel theseparate temperature setting,
push theªDUAL ºbutton (theDUAL indicator
light willturn off)and thedriver's side
temperature settingwillbeapplied toboth
the driver andpassenger sides.
4. Push either theoutside aircirculation ª
º
button orthe airrecirculation ª
º button (the
button withanindicator lightilluminated) for
approximately 2seconds toswitch tothe auto-
matic airintake control mode(theindicator light
will blink twice) .
A visible mistmaybeseen coming fromtheventilators
in hot, humid conditions asthe airiscooled rapidly.
This does notindicate amalfunction.
Heating (A/Coff):
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. Push theªAUT Oºbutton (theAUTOindicator light
will illuminate) .
2. Ifthe ªA/C indicator lightisilluminated, pushthe
ª A/Cº button (theA/C indicator lightwillturn off).
3. Push thetemperature controlbuttons (ª
º and
ª
º) to set the desired temperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªAUT Oºbutton (theAUTO
indicator lightwillilluminate) changesboththe
driver andpassenger sidetemperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªDUAL ºbutton (theDUAL
indicator lightwillilluminate) allowstheuser to
independently changethedriver andpassen-
ger side temperatures withthecorresponding
temperature controlbuttons (ª
º and
Heater andairconditione r,and audio system
4-9
&RQGLWLRQ


> (GLW   0RGHO &$@
4-10
Heater andairconditione r,and audio system
ª
º) .
.
T o cancel theseparate temperature setting,
push theªDUAL ºbutton (theDUAL indicator
light willturn off)and thedriver's side
temperature settingwillbeapplied toboth
the driver andpassenger sides.
. Donot setthe temperature lowerthantheoutside
air temperature. Doingsomay cause thetem-
perature tonot becontrolled properly.
. Ifthe windows fogup,use dehumidified heating
instead ofthe A/C offheating.
Dehumidified defrosting/defogging:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. Push thefront defogger ª
º button (theª
º
indicator lightwillilluminate) .
2. Push thetemperature controlbuttons (ª
º and
ª
º) to set the desired temperature.
. To quickly remove frostfromtheoutside surfaceof
the windshield, setthe temperature controland
the fanspeed tothe maximum levels.
. After thewindshield iscleared, pushtheªAUT Oº
button again(theAUTOindicator lightwillturn
off) .
. When thefront defogger ª
º button ispushed,
the airconditioner willautomatically turnonto
defog thewindshield ifthe outside temperature is
above -28C. Ifthe airrecirculation modeisturned
on atthe time, theventilation willchange fromthe
air recirculation modetothe outside aircirculation
mode toimprove thedefogging performance.
Do not setthe temperature toolow when thefront
defogger modeison (the ª
º indicator lightis
illuminated) ,because doingsomay fogupthe
windshield.
Manual operation
GUID-729 4676B-E04 5-4948-935 6-7E8823822C9D
The manual modecanbeused tocontrol theheater
and airconditioner toyour desired settings.
T o turn offthe heater andairconditioner, pushthe
ªON´OFFº button.
Fan speed control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Push thefanspeed control ª
º button (+ side or

 
> (GLW   0RGHO &$@
4-24
Heater andairconditione r,and audio system
audio system. Musicmaynotplay properly whena
monaural cableisused.
AUX:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Pushing theAUX button willswitch thedisplays as
follows:
iP od/USB ?AUX ?iPod/USB
When theAUX button ispushed withnodevice
plugged intothejack, theaudio system doesnot
change tothe AUX mode.
Radio operation
GUID-052683 ED-ECB9-4FCE-BC7E-0 E89F3482F7B
radio (FM/AM) bandselect :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Pushing theradio band select button willchange the
band asfollows:
AM ?FM1 ?FM2 ?AM
TUNE (Tuning) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn theradio TUNE´FOLDER controlknobformanual
tuning.
Radio DataSystem (RDS)(ifequipped) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
RDS stands forRadio DataSystem, andisadata
information servicetransmitted bysome radiostations
on the FM band (notAMband) encoded withina
regular radiobroadcast. Currently,most RDSstations
are inlarge cities, butmany stations arenow
considering broadcasting RDSdata.
RDS candisplay:
. Station name,suchasªThe Grooveº .
. Music orprogramming typesuch asªClassicalº ,
ªCountryº orªRockº .
SEEK tuning:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Push the
or
button totune from lowtohigh
or high tolow frequencies andtostop atthe next
broadcasting station.
SCAN tuning:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Push theSCAN tuningbutton totune from lowtohigh
frequencies andstop ateach broadcasting stationfor
5 seconds. Pushingthebutton againduring this5
seconds periodwillstop SCAN tuningandtheradio
will remain tunedtothat station.
If the SCAN tuningbutton isnot pushed within5
seconds, SCANtuningmoves tothe next
station.
to
Station memory operations:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
12 stations canbeset forthe FM band (6each for
FM1 andFM2) and6stations canbeset forthe AM
band.
1. Choose theradio band using theradio band
select button.
2. Tune tothe desired stationusingtheSEEK´-
TRACK, SCANbuttonorthe radio TUNE´-
FOLDER controlknob.
3. Push andhold thedesired stationpreset
button
to
until theradio mutes.
4. The station indicator willthen come onand the
sound willresume. Memorizing isnow complete.
5. Other buttons canbeset inthe same manner.
If the battery cableisdisconnected, orifthe fuse
opens, theradio memory willbeerased. Inthat case,
reset thedesired stations.
CD player operation
GUID-EB9 ABA6A-DB DF-49C5-B823 -0C6BB6DEB75E
Place theignition switchinthe ACC orON position
and insert theCompact Disc(CD) intotheslot with the
label sidefacing up.The CDwillbeguided auto-
matically intotheslot and start playing.
After loading theCD, thenumber oftracks onthe CD
and theplay time willappear onthe display .
If the radio isalready operating, itwill automatically turn
off and theCD willplay .
If the system hasbeen turned offwhile theCD was
playing, pushing thePWR button willstart theCD.
PLA Y:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
When theCD button ispushed withthesystem offand
the CD loaded, thesystem willturn onand theCD will
start toplay .
When theCD button ispushed withtheCD loaded
and theradio playing, theradio willautomatically be
turned offand theCD willstart toplay .
Next/Previous Track andFast
Forward/Rewind:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
When the
or
button ispushed formore than
1.5 seconds whiletheCD isbeing played, theCD will
play while fastforwarding orrewinding. Whenthe
button isreleased, theCD willreturn tonormal play
speed.
When the
or
button ispushed forless than
1.5 seconds whiletheCD isbeing played, thenext
track orthe beginning ofthe current trackonthe CD
will beplayed.
&RQGLWLRQ


> (GLW   0RGHO &$@
5-6
Starting anddriving
possible. (SeeªJump startingº (P.6-5) .)
Operating range
GUID-80A4 4E43-0A1B -4ABB-A7E6-B D571734D53 C
SSD0436
The Intelligent Key can only beused forstarting the
engine whentheIntelligent Key iswithin thespecified
operating range
*
1
.
When theIntelligent Key battery isalmost discharged
or strong radiowaves arepresent neartheoperating
location, theIntelligent Key system's operating range
becomes narrowerandmay notfunction properly.
If the Intelligent Key iswithin theoperating range,itis
possible foranyone, evensomeone whodoes notcarry
the Intelligent Key ,to push theignition switchtostart
the engine.
. The luggage roomareaisnot included inthe
operating range,buttheIntelligent Keymay
function.
. Ifthe Intelligent Key isplaced onthe instrument
panel, insidetheglove box,door pocket orthe
corner ofthe interior compartment, theIntelligent
K ey may notfunction.
. Ifthe Intelligent Key isplaced nearthedoor or
window outsidethevehicle, theIntelligent Key
may function.
Continuously Variable Transmission (CVT)
model
GUID-59131E CE-A47C-4849-A212-5FF7051D7462
The ignition lockisdesigned sothat theignition switch
cannot beswitched tothe ªLOCKº position untilthe
shift lever ismoved tothe ªPº (Park) position. When
pushing theignition switchtothe ªOFFº position, make
sure theshift lever isin the ªPº (Park) position.
When theignition switchcannot beswitched tothe
ªL OCKº position:
1. Move theshift lever tothe ªPº (Park) position.
2. Push theignition switchtothe ªOFFº position.
3. Open thedoor. Theignition switchwillchange to
the ªLOCKº position.
If the ignition switchisswitched tothe ªLOCKº
position, theshift lever cannot bemoved fromtheªPº
(Park) position. Theshift lever canbemoved ifthe
ignition switchisin the ªONº position withthefoot
brake depressed.
STEERING LOCK
GUID-E05 63F6E-C5FD- 4C6A-83D7-9D 4CAE048AA9
The ignition switchisequipped withananti-theft
steering lockdevice.
T o lock steering wheel
GUID-199 0FCB9-1E4 5-4067-918 5-B54F6548 9D5D
1. Push theignition switchtothe ªOFFº position
where theignition switchposition indicator willnot
illuminate.
2. Open orclose thedoor. Theignition switchturns
to the ªLOCKº position.
3. Turn thesteering wheel1/6ofaturn tothe right or
left from thestraight upposition.
T o unlock steering wheel
GUID-836 CAB5B-2A97-4D4D-B A13-0D61A7DEAB3B
Push theignition switch,andthesteering wheelwillbe
automatically unlocked.
CAUTION:
. Ifthe battery ofthe vehicle isdischarged, the
push-button ignitionswitchcannot be
switched fromtheªLOCKº position.
. Ifthe ignition switchposition doesnot
change fromtheªLOCKº position, pushthe
ignition switchagainwhilerotating the
steering wheelslightly tothe right andleft.
IGNITION SWITCHPOSITIONS
GUID-787 88975-EF20-4EEC-9 BD9-C8FD 1F38789B
SSD0859
When theignition switchispushed withoutdepressing
the brake pedal (Continuously Variable Transmission
model) orthe clutch pedal(Manual Transmission
model) ,the ignition switchposition willchange as
follows:
. Push oncetochange toªACCº .
. Push twotimes tochange toªONº .
. Push three times tochange toªOFFº .
&RQGLWLRQ


> (GLW   0RGHO &$@
. Push fourtimes toreturn toªACCº .
. Open orclose anydoor toreturn toªLOCKº when
in the ªOFFº position.
The indicator light
*
A
on the ignition switchillumi-
nates whentheignition switchisin the ªACCº orªONº
position.
L OCK position
GUID-43425B BE-7F00-4ED4-A87 5-071702F2 842A
The ignition switchandsteering lockcanonly be
locked atthis position.
The ignition switchwillbeunlocked whenitis pushed
to the ªACCº position whilecarrying theIntelligent Key .
ACC position
GUID-202F5 141-00BE-47DC-B76C-7 268FE6DC636
The electrical accessory poweractivates atthis
position withouttheengine turnedon.
ON position
GUID-9FF5 AE68-135D-4 D67-8BBC-43E8DC881 23E
The ignition systemandtheelectrical accessory power
activate atthis position withouttheengine turnedon.
OFF position
GUID-81EA9 526-2AC3-4FF2-91B3 -F3E0BFFFA02D
The engine isturned offwith thesteering wheel
unlocked.
WARNING:
Never pushtheignition switchtothe ªOFFº
position whiledriving. Thesteering wheelmay
lock andcause thedriver tolose control ofthe
vehicle, resulting inserious vehicledamage or
personal injury.
CAUTION:
Do not leave thevehicle forextended periodsof
time when theignition switchisin the ªACCº or
ªONº position andtheengine isnot running. This
candischarge thebattery.
INTELLIGENT KEYBATTER YDISCHARGE
GUID-EC7 BC919-57B A-4B13-9C48-52E166 3770CA
SSD0860
If the battery ofthe Intelligent Key isdischarged, or
environmental conditionsinterferewiththeIntelligent
K ey operation, starttheengine according tothe
following procedure:
1. Continuously Variable Transmission (CVT)
model:
Move theshift lever tothe ªPº (Park) orªNº
(Neutral) position.
Manual Transmission (MT)model:
Move theshift lever tothe ªNº (Neutral) position.
2. Firmly depress thebrake pedal.
3. Touch theignition switchwiththeIntelligent Key
as illustrated. (Achime willsound.)
4. Push theignition switchwhiledepressing the
brake pedal (Continuously Variable Transmission
models) orclutch pedal(Manual Transmission
models) within10seconds afterthechime
sounds. Theengine willstart.
After step3is performed, whentheignition switchis
pushed withoutdepressing thebrake pedal (Con-
tinuously Variable Transmission models)orclutch pedal
(Manual Transmission models),the ignition
switch position willchange toªACCº .
NO TE:
. When theignition switchispushed tothe
ª ACCº orªONº position orthe engine is
started bythe above procedures, theIntel-
ligent Keysystem warning lightmayblink in
yellow evenifthe Intelligent Keyisinside
the vehicle. Thisisnot amalfunction. To stop
the warning lightfrom blinking, touchthe
ignition switchwiththeIntelligent Key
again.
. Ifthe Intelligent Keysystem warning lightin
the meter isblinking ingreen, replace the
battery assoon aspossible. (SeeªBatteryº
(P .8-18) .)
Starting anddriving
5-7
&RQGLWLRQ